OEDRO FMQNV7H

OEDRO Running Boards Instruction Manual

Brand: OEDRO | Model: FMQNV7H

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your OEDRO Armored Pedal Running Boards. Please read this manual thoroughly before installation and use to ensure proper fitment and safe operation. These running boards are designed to provide convenient entry and exit for your vehicle while offering side protection.

2. Yhteensopivuus

These running boards are compatible with the following vehicle models:

  • 2019-2025 Chevy Silverado 1500 Crew Cab
  • 2019-2025 GMC Sierra 1500 Crew Cab
  • 2020-2025 Chevy Silverado 2500HD 3500HD Crew Cab
  • 2020-2025 GMC Sierra 2500HD 3500HD Crew Cab

Huomautus: Excludes 2019 1500 LD/Limited models. Please verify your vehicle's cab size to ensure proper fitment.

Vehicle Cab Compatibility Chart
Image 2.1: Visual guide for compatible Crew Cab models versus Double Cab and Standard Cab models.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

  • 2 x Running Boards
  • Complete set of Mounting Brackets
  • All necessary Hardware (bolts, washers, nuts)
  • DIY Instruction Manual (this document)
Package Contents and Product Dimensions
Kuva 3.1: ohiview of included running boards, mounting hardware, and instruction manual, along with product dimensions.

4. Asennus ja asennus

Installation is a bolt-on process and typically requires general garage tools. No drilling or cutting is required for most models. For models from 2017 and later, trimming may be needed on the plastic DEF tank cover.

4.1 Asennusta edeltävät vaiheet

  1. Pura kaikki osat pakkauksesta ja tarkista ne pakkauksen sisältöluettelon perusteella.
  2. Identify the mounting points on your vehicle's frame. These are typically pre-drilled holes covered by plastic plugs. Remove any plastic plugs from the mounting holes.
  3. Familiarize yourself with the mounting brackets. Note that brackets are not pre-welded to the step bars.

4.2 Kannattimen asennus

  1. Attach the appropriate mounting brackets to the vehicle's frame using the provided hardware. Ensure the bolts are finger-tight only at this stage säätömahdollisuuden mahdollistamiseksi.
  2. Repeat for all mounting points on both the driver and passenger sides.

4.3 Running Board Attachment

  1. Carefully position the running board onto the installed brackets.
  2. Secure the running board to the brackets using the remaining hardware. Again, keep bolts finger-tight.

4.4 Final Adjustment and Tightening

  1. Adjust the running boards to your desired position, ensuring they are level and properly aligned with the vehicle.
  2. Once satisfied with the alignment, fully tighten all bolts on the brackets and running boards. Do not overtighten.

4.5 Asennusvideot

Visuaalisen oppaan löydät seuraavista asennusvideoista:

Video 4.1: Detailed installation guide for OEDRO Running Boards, covering all steps from unpacking to final tightening. (Duration: 22:09)
Video 4.2: Asennus päälleview for OEDRO side steps on 2019-2024 Silverado 1500 Crew Cab. (Duration: 0:56)
Video 4.3: Quick guide for installing oEdRo 6.5'' Textured Black Side Steps. (Duration: 0:46)
Video 4.4: Installation process for OEDRO Running Boards with High-Low Step design. (Duration: 1:52)

5. Käyttöohjeet

To use the running boards, simply step onto the textured surface when entering or exiting your vehicle. The wide step area and slip-proof design provide a secure footing.

Foot stepping on the running board
Image 5.1: Demonstrates the ample step area for secure footing when entering or exiting the vehicle.
Bear standing on running board to show 550 lbs weight capacity
Image 5.2: Illustrates the robust 550 lbs weight capacity of the running boards.

6. Huolto

To maintain the appearance and longevity of your OEDRO running boards:

  • Regularly clean the running boards with mild soap and water to remove dirt, mud, and road salt.
  • Inspect all mounting hardware periodically for tightness. Retighten if necessary.
  • The durable powder coating provides protection against rust and corrosion. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
Features of OEDRO Running Boards including slip-proof finish and load capacity
Image 6.1: Highlights key features such as the slip-proof texture black finish with E-coating and heavy-duty tubes for load capacity.
Rust Resistance layers of the running boards
Kuva 6.2: Poikkileikkaus view illustrating the carbon steel base, E-coat layer, and powder coated layer for rust resistance.

7. Vianmääritys

  • Löysä istuvuus: If the running boards feel loose, check all mounting bolts and ensure they are securely tightened. Over time, vibrations can cause bolts to loosen.
  • Epätavallinen melu: Rattling or squeaking noises may indicate loose hardware or improper installation. Re-inspect all connection points and tighten as needed.
  • Surface Wear/Rust: While designed for rust resistance, extreme conditions or damage to the coating can lead to wear. Clean the affected area and apply a rust-inhibiting paint if necessary.

8. Tekniset tiedot

OminaisuusYksityiskohta
MerkkiOEDRO
Mallin nimiFMQNV7H
MateriaaliSeosteräs
UlkopintaMusta jauhe päällystetty
VäriMusta
Tuotteen paino67.02 puntaa
Painorajoitus550 puntaa
Tuotteen mitat (PxLxK)15.35 x 15.35 x 5.51 tuumaa
Koko7 tuumaa
UPC840265271650

9. Takuu

This product comes with a 1-year manufacturer's warranty. For warranty claims or further inquiries, please refer to the customer support information.

10. Asiakastuki

Should any inquiries arise regarding your OEDRO Running Boards, please feel free to contact us directly through the retailer's customer service channels. We are committed to providing assistance and ensuring your satisfaction.

Aiheeseen liittyvät asiakirjat - FMQNV7H

Preview OEDRO-astinlautojen asennusopas Chevy Silverado/GMC Sierra -malleihin
Yksityiskohtainen asennusopas OEDRO-astinlautoille, jotka on suunniteltu vuosien 2007-2018 Chevy Silverado 1500 Crew Cab- ja 2007-2019 2500/3500HD -malleihin. Sisältää osaluettelon, vaiheittaiset ohjeet ja vianetsintävinkkejä.
Preview OEDRO 6'' Running Boards Installation Guide for Silverado/Sierra
Step-by-step installation instructions for OEDRO 6-inch running boards on 2007-2018 Chevrolet Silverado/GMC Sierra 1500 Crew Cab and 2007-2019 2500/3500HD models, including diesel variants. Includes tools required, parts list, and detailed procedures.
Preview OEDRO-askellautojen asennusopas Chevy Silverado/GMC Sierra -malliin
Detailed installation guide for OEDRO running boards side steps compatible with 2019-2026 Chevy Silverado GMC Sierra 1500 Crew Cab and 2020-2025 2500HD 3500HD models. Includes tools required, step-by-step instructions, and a complete parts list.
Preview OEDRO OETESS-0038/0063 Astinlautojen asennusopas Silverado/Sierra-malleihin
Kattavat asennus- ja hoito-ohjeet OEDRO OETESS-0038- ja OETESS-0063 -askellautoille, jotka ovat yhteensopivia Chevrolet Silveradon ja GMC Sierran vuosimallien 2007-2019 kanssa. Sisältää osaluettelon, vaiheittaisen kokoamisohjeet ja tärkeitä huomautuksia.
Preview OEDRO-astinlautojen asennusopas Chevy Coloradoon/GMC Canyoniin ja Jeep Gladiatoriin
Step-by-step installation instructions for OEDRO running boards and side steps, compatible with 2015-2026 Chevy Colorado/GMC Canyon Crew Cab and 2020-2026 Jeep Gladiator JT 4 Door models. Includes tools required, parts list, and torque specifications.
Preview OEDRO-astinlautojen asennusopas Chevy Colorado/GMC Canyon Crew Cab -malliin
Yksityiskohtainen asennusopas OEDRO-astinlautoille, jotka ovat yhteensopivia vuosien 2015–2026 Chevy Colorado- ja GMC Canyon Crew Cab -mallien kanssa. Sisältää tarvittavat työkalut, vaiheittaiset ohjeet ja kattavan osaluettelon.