Johdanto
This manual provides detailed instructions for the installation, operation, and maintenance of your JTWEB White Bathroom Basin Mixer Tap. Please read this manual thoroughly before installation and retain it for future reference.
The JTWEB single-lever mixer tap features a modern design and provides adjustable hot and cold water flow, suitable for bathroom basins.
Turvallisuustiedot
- Varmista, että päävesihana on katkaistu ennen asennuksen aloittamista.
- Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä pätevään putkimieheen.
- Do not use abrasive cleaners or harsh chemicals on the tap's surface, as this may damage the finish.
- Check all connections for leaks after installation and before regular use.
Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:
- JTWEB White Bathroom Basin Mikseri Napauta
- Hot and Cold Water Connection Hoses (standard 3/8 inch)
- Mounting Hardware (gaskets, nuts, washers)
- Käyttöohje (tämä asiakirja)
Kuva: Yliview of the JTWEB mixer tap components, showing the main faucet body, hot and cold water connection hoses, and various mounting parts.
Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | SF20250917B08HK5Q3BN |
| Väri | Valkoinen |
| Materiaali | Copper Alloy (Body), Stainless Steel (Handle) |
| Valmis | Kiiltävä |
| Asennusmenetelmä | Single Hole, Surface Mount |
| Kahvojen lukumäärä | 1 (vipumainen) |
| Virtausnopeus | 5 litraa minuutissa |
| Uonen korkeus | 8 tuumaa (noin 20.3 cm) |
| Tuotteen paino | 1.62 kg |
| Pakkauksen mitat | 25.4 x 19.5 x 8.5 cm |
Image: Detailed technical drawing showing the dimensions of the faucet, including height, spout reach, and mounting hole diameter.
Asennusohjeet
Follow these steps for proper installation of your JTWEB basin mixer tap:
- Valmistele Basin: Ensure the mounting hole in your basin is clean and has a diameter of approximately 35mm (1.4 inches).
- Asenna hana: Insert the faucet body into the mounting hole from above the basin.
- Kiinnitä hana: B:n altaasin, place the rubber gasket, metal washer, and then tighten the mounting nut onto the threaded rod of the faucet. Ensure the faucet is aligned correctly before fully tightening.
- Liitä vesiletkut: Attach the hot and cold water supply hoses to the corresponding inlets on the faucet (typically marked with red for hot and blue for cold, or indicated by position). Connect the other ends of the hoses to your hot and cold water supply lines. The hoses are standard 3/8 inch connections.
- Tarkista vuodot: Slowly turn on the main water supply. Check all connections for any signs of leakage. Tighten connections if necessary.
- Testitoiminta: Operate the faucet handle to ensure proper hot and cold water flow and temperature control.
Image: Diagram illustrating the installation process, including the faucet's mounting mechanism and water hose connections.
Käyttöohjeet
The JTWEB mixer tap features a single lever for controlling both water flow and temperature.
- Veden virtauksen ohjaus: Lift the lever upwards to increase water flow. Push it downwards to decrease or stop the flow.
- Lämpötilan säätö: Move the lever to the left for hot water and to the right for cold water. The temperature can be adjusted by positioning the lever between these two extremes.
- 360° kääntyvä juoksuputki: The faucet spout can rotate 360 degrees, providing flexibility for various basin käyttää.
- Ilmastin: The integrated aerator ensures a soft, splash-free water stream and helps save water.
Image: The JTWEB faucet actively dispensing water, demonstrating its functional design.
Image: Illustration of the single lever's movement for hot and cold water selection.
Image: The faucet demonstrating its 360-degree rotatable spout, enhancing usability.
Huolto
Regular maintenance will help preserve the appearance and functionality of your JTWEB sekoitushana.
- Puhdistus: Puhdista hana säännöllisesti pehmeällä liinalla ja miedolla saippualla. Huuhtele huolellisesti vedellä ja kuivaa pehmeällä liinalla vesitahrojen välttämiseksi.
- Vältä kovia puhdistusaineita: Do not use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the polished finish.
- Ilmastimen puhdistus: If water flow becomes restricted or uneven, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris or mineral deposits, and then reattach it.
Kuva: Yksityiskohtainen view of the faucet's aerator, highlighting its design for soft, splash-free water flow and ease of cleaning.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Alhainen veden virtaus | Clogged aerator; partially closed shut-off valves; kinked supply hose. | Clean the aerator. Ensure shut-off valves are fully open. Check supply hoses for kinks. |
| Vuodot liitoksissa | Löysät liitokset; vaurioituneet aluslevyt. | Tighten connections. Replace damaged washers if necessary. |
| Veden lämpötila ei säädy | Issue with hot/cold water supply; faulty cartridge. | Check hot and cold water supply lines. If problem persists, the internal cartridge may need replacement (consult a professional). |
| Liiallinen melu käytön aikana | High water pressure; loose internal components. | Consider installing a pressure reducer if water pressure is too high. If noise persists, consult a professional. |
Takuu ja tuki
For warranty information or technical support, please refer to the retailer where the product was purchased or contact JTWEB customer service directly. Keep your purchase receipt as proof of purchase.
Huomautus: Takuuehdot voivat vaihdella alueittain ja jälleenmyyjiltä riippuen.