GOOLOO GP80 800A Peak Car Jump Starter User Manual

1. Johdanto

The GOOLOO GP80 is a lightweight and compact lithium car jump starter designed for 12-volt vehicle batteries. It provides a safe and efficient way to jump start a dead battery in seconds. This device also functions as a portable power bank for various USB devices and includes a built-in LED flashlight for emergencies.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your GOOLOO GP80 jump starter. Please read it thoroughly before use.

2. Pakkauksen sisältö

Pura pakkausta varmistaessasi, että kaikki alla luetellut osat ovat mukana ja hyvässä kunnossa:

• GOOLOO Jump Starter GP80 Unit
• Älykäs jumpperikaapeli
• Quick Charge Micro USB Cable
• Varussäkki
• Käyttöopas (tämä asiakirja)

Image: All items included in the GOOLOO GP80 package, including the jump starter, smart jumper cables, USB cable, kit bag, and user manual.

3. Tuote ohiview ja Ominaisuudet

The GOOLOO GP80 is a versatile device designed for automotive emergencies and portable power needs.

3.1 Tärkeimmät ominaisuudet

• Tehokas apukäynnistin: Capable of restarting vehicles with up to 4.5L gas engines using an 800A peak current. Suitable for cars, motorcycles, RVs, tractors, light-duty trucks, ATVs, and more.
• Kannettava virtapankki: Equipped with two USB outputs (5V 2.4A/9V 2A), including a Quick Charge 3.0 port for rapid charging of smartphones, tablets, and other mobile devices.
• Emergency LED Work Light: Features a built-in LED flashlight with three modes: High, Strobe, and SOS, useful for roadside emergencies or outdoor activities.
• Edistynyt turvallisuussuoja: Integrated smart jumper clamps provide protection against over current, short circuit, overload, over-voltage, over-charge, reverse polarity, reverse connection, and over-discharge.

Image: The GOOLOO GP80 jump starter shown with icons representing its capability to start gas engines up to 4.5L, motorcycles, and yachts.

3.2 Tuotteen osat

Familiarize yourself with the different parts of your GP80 unit:

Image: A diagram of the GOOLOO GP80 unit, highlighting the LED power indicator, power button, Quick Charge Input (IN 5V/9V), Quick Charge Output (OUT 5V/9V), standard USB Output (OUT 5V), LED light, and 12V Car Jumpstart port.

• LED -virran merkkivalo: Näyttää akun jäljellä olevan varaustason ja lataustilan.
• Virtapainike: Turns the unit on/off and cycles through LED flashlight modes.
• Quick Charge Input (IN 5V/9V): For recharging the GP80 unit.
• Quick Charge Output (OUT 5V/9V): Pikalataukseen yhteensopiville laitteille.
• Standard USB Output (OUT 5V): Tavallisten USB-laitteiden lataamiseen.
• LED-valo: Sisäänrakennettu taskulamppu.
• 12V Car Jumpstart Port: Connection point for the smart jumper cable.

4. Setup and Charging the GP80

Before first use, fully charge your GOOLOO GP80 unit.

4.1 Ensimmäinen lataus

1. Connect the Quick Charge Micro USB Cable to the GP80's Quick Charge Input (IN 5V/9V) port.
2. Liitä USB-kaapelin toinen pää yhteensopivaan USB-seinälaturiin (ei sisälly toimitukseen) tai autolaturiin.
3. The LED power indicators will illuminate and flash during charging. All four LEDs will be solid when the unit is fully charged.

It is recommended to fully charge the unit every 3-4 months to maintain battery health, even if not in use.

5. Käyttöohjeet

5.1 Ajoneuvon hyppykäynnistys

Noudata näitä ohjeita huolellisesti käynnistääksesi ajoneuvosi apukaapeleilla:

1. Ensure the GP80 unit has at least 50% charge (two LED indicators lit).
2. Connect the blue plug of the smart jumper cable into the 12V Car Jumpstart Port on the GP80 unit. Ensure a firm connection.
3. Kiinnitä punainen (+) clamp of the smart jumper cable to the positive (+) terminal of your vehicle's battery.
4. Kiinnitä musta (-) clamp of the smart jumper cable to the negative (-) terminal of your vehicle's battery.
5. Kerran clamps are correctly connected, the indicator light on the smart jumper cable will turn kiinteä vihreä, indicating it is safe to proceed. If it shows a different color or flashes, refer to the troubleshooting section.
6. Käynnistä ajoneuvosi moottori.
7. Once the engine starts, immediately remove the smart jumper cable's musta (-) clamp from the vehicle battery's negative terminal.
8. Then, remove the punainen (+) clamp from the vehicle battery's positive terminal.
9. Finally, disconnect the blue plug of the smart jumper cable from the GP80 unit.

Important: Do not repeatedly attempt to jump start a large engine vehicle in a short period. Allow the unit to cool down between attempts if necessary.

Image: The smart jumper clamps with an overlay listing protection features such as short circuit, high temperature, reverse connection, over current, surge voltage, reverse polarity, high voltage, and over discharge protection.

5.2 Käyttö kannettavana varavirtalähteenä

The GP80 can charge your electronic devices:

1. Connect your device's USB charging cable to either the Quick Charge Output (OUT 5V/9V) or the standard USB Output (OUT 5V) port on the GP80.
2. Aloita lataus painamalla virtapainiketta kerran. LED-merkkivalot näyttävät akun jäljellä olevan varaustason.
3. Disconnect your device once fully charged. The GP80 will automatically turn off after a period of inactivity.

Image: The GOOLOO GP80 unit connected via USB cables to charge an iPhone and another smartphone, demonstrating its quick charging capability for various devices like iPads, PSPs, and cameras.

5.3 LED-taskulampun käyttö

Sisäänrakennetussa LED-taskulampussa on kolme toimintatilaa:

1. Aktivointi: Long press the power button for approximately 3 seconds to turn on the LED light in Korkea tila.
2. Tilojen vaihtaminen: Paina virtapainiketta uudelleen vaihtaaksesi Strobe mode. Press it a third time to activate SOS flashing mode.
3. Sammuta: Long press the power button again for approximately 3 seconds.

Image: The GOOLOO GP80 unit with its LED flashlight illuminated, showing icons for Strong, SOS, and Strobe light modes, set against a dark, rainy background with a car.

6. Turvaohjeet

To ensure safe operation and prevent damage to the unit or injury, always observe the following safety guidelines:

• Do not use the jump starter if the smart jumper cable or the unit itself is damaged.
• Älä yritä käynnistää ajoneuvoa apuvirralla, jos sen akku on pahasti vaurioitunut tai jäätynyt.
• Ensure proper polarity when connecting the clamps (red to positive, black to negative). The smart jumper cable provides protection against reverse polarity.
• Älä salli punaista ja mustaa clamps to touch each other once connected to the GP80.
• Pidä laite poissa lasten ulottuvilta.
• Do not expose the unit to water, extreme temperatures, or direct sunlight for extended periods.
• Älä pura tai muuta laitetta.
• Use only the provided smart jumper cable and Quick Charge Micro USB cable.
• Disconnect the smart jumper cable from the vehicle battery within 30 seconds after the engine starts.

7. Vianmääritys

If you encounter issues with your GP80, refer to the following common problems and solutions:

8. Tekniset tiedot

Detailed technical specifications for the GOOLOO GP80:

9. Hoito ja huolto

Proper care ensures the longevity and performance of your GP80:

• Lataus: Lataa laite 3–4 kuukauden välein, vaikka sitä ei käytettäisikään, akun kunnon ylläpitämiseksi.
• Varastointi: Store the GP80 in its kit bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Puhdistus: Pyyhi laite kuivalla, pehmeällä liinalla. Älä käytä voimakkaita kemikaaleja tai hankaavia materiaaleja.
• Akun hävittäminen: Do not dispose of the unit in household waste. Follow local regulations for lithium polymer battery recycling.

10. Takuu ja tuki

GOOLOO products are designed for reliability and performance. For warranty information, please refer to the warranty card included in your package or visit the official GOOLOO websivusto.

For technical support, troubleshooting assistance, or any questions regarding your GOOLOO GP80, please contact GOOLOO customer service through their official channels.