Cooler Master MFX-B2DN-18NPW-R1

Cooler Master SickleFlow 120 White LED Fan Instruction Manual

Model: MFX-B2DN-18NPW-R1

Johdanto

The Cooler Master SickleFlow 120 White LED fan is designed to provide efficient air cooling for both CPU coolers and computer cases. This fan features an optimized blade design for improved airflow and static pressure, along with an enhanced frame for reduced turbulence and noise. The sealed fan bearing ensures durability and prevents dust and lubricant leakage.

Cooler Master SickleFlow 120 White LED Fan, front view

Kuva 1: Etuosa view of the Cooler Master SickleFlow 120 White LED Fan.

Asennus ja asennus

Follow these steps to properly install your SickleFlow 120 White LED fan into your computer case or onto a CPU cooler.

  1. Valmistele järjestelmäsi: Varmista, että tietokoneesi on sammutettu ja irrotettu pistorasiasta. Avaa tietokoneen kotelo päästäksesi käsiksi tuulettimien kiinnityspaikkoihin.
  2. Tunnista asennuspaikka: Determine where you will install the fan (e.g., front intake, rear exhaust, top exhaust, or on a CPU heatsink/radiator).
  3. Asenna tuuletin: Align the fan with the screw holes on your case or cooler. Use the provided mounting screws to secure the fan. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
  4. Fan frame with mounting holes

    Figure 2: Fan frame showing mounting points.

  5. Kytke virta: Locate an available 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin connector to this header.
  6. Kaapelin hallinta: Reititä tuulettimen kaapeli siististi, jotta se ei häiritse muita komponentteja tai ilmavirtaa.
  7. Sulje kotelo ja kytke virta päälle: Once the fan is securely mounted and connected, close your computer case, plug in the power, and turn on your system.

Toiminta

The SickleFlow 120 White LED fan operates automatically once connected to a compatible 4-pin PWM motherboard header.

  • PWM-ohjaus: The fan speed (RPM) is controlled by the motherboard's PWM signal, which typically adjusts based on system temperature to optimize cooling performance and noise levels.
  • White LED Illumination: The fan features integrated white LED lighting that illuminates when the fan receives power. The translucent blades help diffuse the light evenly.
  • Cooler Master SickleFlow 120 White LED Fan in operation

    Kuva 3: Sivu view of the fan with white LED illumination.

  • Airflow and Pressure: The fan is designed with an Air Balance blade to provide a balance of high airflow (up to 62 CFM) and static pressure (up to 2.5 mmH2O), making it suitable for various cooling applications.

Huolto

Säännöllinen huolto auttaa varmistamaan tuulettimen optimaalisen suorituskyvyn ja pitkän käyttöiän.

  • Puhdistus: Periodically clean dust accumulation from the fan blades and frame using compressed air or a soft, dry cloth. Ensure the fan is powered off before cleaning.
  • Close-up of fan blades

    Figure 4: Close-up of the fan blades, illustrating areas to clean.

  • Laakerin hoito: The fan features a sealed rifle bearing designed to prevent dust and lubricating oil leakage, requiring no user maintenance for the bearing itself.

Vianetsintä

If you encounter issues with your SickleFlow 120 White LED fan, refer to the following common problems and solutions.

  • Tuuletin ei pyöri:
    • Check if the 4-pin PWM connector is securely plugged into the motherboard header.
    • Ensure the motherboard fan header is enabled in the BIOS/UEFI settings.
    • Verify that the system is receiving power.
  • LED-valot eivät syty:
    • Confirm the fan is receiving power and spinning. The LEDs are powered through the same 4-pin connector.
    • Ensure there are no physical obstructions or damage to the LED components.
  • Liiallinen melu:
    • Tarkista, ettei tuulettimen lapoja tukkivia kaapeleita tai esineitä.
    • Ensure the fan is securely mounted and screws are tightened. Loose mounting can cause vibration.
    • Clean any dust buildup on the fan blades, which can cause imbalance and noise.
    • Adjust fan speed settings in your motherboard's BIOS/UEFI or fan control software.

Tekniset tiedot

Detailed technical specifications for the Cooler Master SickleFlow 120 White LED Fan.

OminaisuusArvo
MallinumeroMFX-B2DN-18NPW-R1
Tuotteen mitat4.72"P x 4.72"L x 0.98"K (120 mm x 120 mm x 25 mm)
MerkkiViileämpi mestari
Virtaliittimen tyyppi4-Pin PWM
Voitage12 V DC
Wattage3.24 wattia
JäähdytysmenetelmäIlmatuuletin
Yhteensopivat laitteetPöytätietokoneet
Melutaso8-27 dBA
MateriaaliMetalli (runko)
Suurin pyörimisnopeus1800 RPM
Ilmavirran kapasiteetti62 CFM
Tuotteen paino156 g
Mukana olevat komponentitFan & Cable

Takuutiedot

Cooler Master products are covered by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please refer to the official Cooler Master websivustolta tai ota yhteyttä heidän asiakastukeen. Säilytä ostokuitti takuuvaatimuksia varten.

Tukea

For technical assistance, product inquiries, or further support, please visit the official Cooler Master support website. You can find FAQs, driver downloads, and contact information for your region there.

Virallinen Websivusto: www.coolermaster.com

© 2024 Cooler Master. Kaikki oikeudet pidätetään.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.