DIGITUS kaksoisnäyttötelineen käyttöohje

Johdanto

With the dual monitor stand from DIGITUS® you can conveniently position two monitors of sizes 15" - 32" at your desk. The quick release feature also makes it easier to install the monitors. The VESA mount is simply pushed into the corresponding mount and fixed with a screw. Easily align the monitors according to your needs and can pan, tilt or rotate the monitors themselves, e.g. for portrait monitors. You can also adjust a height adjustment of up to 40 cm. In addition, the cables of the monitors can be neatly laid through the included cable routes. Do something good for yourself and your health by adjusting the monitor optimally to your body and sitting position.

Turvallisuustiedot

Lue kaikki ohjeet huolellisesti ennen kokoamista ja käyttöä. Säilytä tämä käyttöohje myöhempää tarvetta varten.

• Varmista, että kaikki osat ovat mukana ja vahingoittumattomia ennen kokoamista. Älä käytä laitetta, jos jokin osa puuttuu tai on viallinen.
• Do not exceed the maximum weight capacity of 2 x 8 kg (17.6 lbs) per monitor arm.
• Ensure the desk surface is stable and capable of supporting the combined weight of the stand and monitors.
• Always use two people for lifting and positioning heavy monitors to prevent injury.
• Tighten all screws firmly, but do not overtighten to avoid stripping threads.
• Pidä lapset ja lemmikkieläimet loitolla kokoamisen aikana.

Mitä laatikossa on

• Universal dual monitor stand
• Mounting material (screws, washers, tools)
• Asennusohjeet (tämä käyttöohje)

Kuva: Yliview of the DIGITUS Dual Monitor Stand components, including the base, central pole, monitor arms, and VESA plates.

Asennus ja asennus

Follow these steps to assemble and install your DIGITUS Dual Monitor Stand.

1. Kokoa pohja: Attach the central pole to the heavy-duty base using the provided screws. Ensure it is securely fastened to provide a stable foundation for your monitors.
2. Attach Monitor Arms: Slide the monitor arms onto the central pole. Adjust their height to your desired position and secure them with the locking mechanism.
3. Install VESA Plates: Attach the VESA mounting plates to the back of your monitors. The stand supports VESA patterns 75x75mm and 100x100mm. Use the appropriate screws for your monitor.
   

   Kuva: Takaosa view of two monitors mounted on the stand, illustrating the VESA attachment points and cable routing.

4. Kiinnitä näytöt: Carefully slide the monitors (with VESA plates attached) onto the monitor arms' quick-release slots. Ensure they click into place and are secured with the safety screws.
5. Kaapelin hallinta: Utilize the integrated cable clips or channels along the arms and pole to route your monitor cables neatly. This helps maintain a tidy workspace.
   

   Kuva: Edessä view of two monitors securely mounted on the DIGITUS stand, demonstrating a clean setup.

Käyttö ja säädöt

The DIGITUS Dual Monitor Stand offers flexible adjustments for optimal viewmukavuutta.

• Korkeuden säätö: Löysää clamp on the central pole to slide the monitor arms up or down. Retighten the clamp firmly once the desired height is achieved.
• Kallistuksen säätö: Each monitor can be tilted up to 45 degrees (both up and down) to reduce glare and optimize viewing angles. Loosen the tilt knob behind the VESA plate, adjust, and retighten.
• Kääntymisen säätö: The monitor arms can swivel horizontally to position your screens as needed.
• Kierto (pysty/vaaka): Monitors can be rotated 360 degrees at the VESA plate, allowing for easy switching between landscape and portrait orientations.
• Kaapelin hallinta: Use the integrated cable clips to route power and video cables along the arms and down the central pole for a clean and organized workspace.

Huolto

Säännöllinen huolto varmistaa näyttötelineesi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Puhdistus: Pyyhi jalusta pehmeällä,amp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
• Tarkista liitännät: Tarkista säännöllisesti kaikki ruuvit ja liitokset varmistaaksesi, että ne ovat kireällä. Kiristä tarvittaessa.
• Voitelu: No lubrication is typically required for this type of stand. If any joints become stiff, consult professional advice.

Vianetsintä

If you encounter issues with your DIGITUS Dual Monitor Stand, refer to the following common problems and solutions.

Tekniset tiedot

Takuu ja tuki

This product comes with a 1-year EU spare part availability duration, indicating support for replacement parts within this period.

For further assistance, technical support, or warranty claims, please contact DIGITUS customer service through their official website or the retailer where the product was purchased. Please have your model number (DA-90401) and purchase information ready.

Lisätietoja on osoitteessa: www.digitus.info