1. Johdanto
The Maxtrack 5-Way HDMI Switch (Model CS 1-5 L) is designed to connect up to five HDMI source devices to a single HDMI display. This device allows for easy switching between multiple HDMI sources such as game consoles, Blu-ray players, and streaming boxes, eliminating the need to constantly reconnect cables. It supports 4K resolution at 30Hz, Full HD, 3D, and HDCP, ensuring high-quality video and audio transmission.
2. Pakkauksen sisältö
Tarkista pakkauksesta seuraavat tuotteet:
- Maxtrack 5-Way HDMI Switch (CS 1-5 L)
- IR kaukosäädin
- IR-vastaanotin kaapeli
- USB-virtakaapeli
- Käyttöopas (tämä asiakirja)

Figure 2.1: Product packaging showing the HDMI switch, remote, and cables.
3. Tuotteen ominaisuudet
- 5 HDMI-tuloa, 1 HDMI-lähtö: Connects up to five source devices to one display.
- 4K @ 30Hz Support: Delivers high-resolution video.
- Full HD- ja 3D-tuki: Compatible with various video formats.
- HDCP-yhteensopiva: Ensures secure content transmission.
- Suuri kaistanleveys: 340 MHz bandwidth and 10.2 Gbps data transfer speed for stable signal.
- 48-bit Deep Color: Provides vivid and deep colors.
- Uncompressed Audio Support: Compatible with formats like LPCM for optimal sound quality.
- Useita ohjausvaihtoehtoja: Switch inputs via button on the device or included IR remote control.

Kuva 3.1: Etuosa view of the HDMI switch showing Input 1, Input 5, and Output ports.

Kuva 3.2: Sivu view of the HDMI switch showing Input 2, Input 3, and Input 4 ports.
4. Asennus
Follow these steps to set up your Maxtrack 5-Way HDMI Switch:
- HDMI-lähdelaitteiden liittäminen: Connect up to five HDMI source devices (e.g., game console, Blu-ray player) to the HDMI Input ports (IN PUT 1-5) on the switch using HDMI cables.
- Yhdistä näyttöön: Connect one end of an HDMI cable to the HDMI Output port (OUT PUT) on the switch and the other end to the HDMI input of your display (TV, monitor, projector).
- Kytke IR-vastaanotin: Plug the IR Receiver Cable into the designated IR port on the HDMI switch. Position the IR receiver in a location where it can receive signals from the remote control.
- Liitä virta: Connect the USB Power Cable to the power input port on the HDMI switch. Plug the other end of the USB cable into a USB power source (e.g., a USB port on your TV, a USB wall adapter).
- Virta päälle: Ensure all connected devices and the display are powered on.

Figure 4.1: HDMI switch with IR receiver and USB power cable connected.

Figure 4.2: The IR receiver cable.

Figure 4.3: The USB power cable.
5. Käyttöohjeet
Once the setup is complete, you can switch between your connected HDMI devices using one of two methods:
5.1 Using the Button on the Device
- Press the "SELECTED" button on the front of the HDMI switch to cycle through the available input sources (IN PUT 1, 2, 3, 4, 5).
- The LED indicators on the switch will illuminate to show which input is currently selected.
5.2 Infrapunakaukosäätimen käyttö
- Point the IR remote control towards the IR receiver connected to the HDMI switch.
- Press the corresponding number button (1, 2, 3, 4, or 5) on the remote to directly select the desired HDMI input.

Figure 5.1: The IR remote control for the HDMI switch.
6. Huolto
To ensure the longevity and optimal performance of your HDMI switch, follow these maintenance guidelines:
- Puhdistus: Puhdista laitteen ulkopinta pehmeällä, kuivalla liinalla. Vältä nestemäisten puhdistusaineiden tai hankaavien materiaalien käyttöä.
- Sijoitus: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Käsittely: Handle the device and cables with care. Avoid bending or pulling cables excessively.
- Teho: Disconnect power when the device is not in use for extended periods.
7. Vianmääritys
If you encounter issues with your Maxtrack 5-Way HDMI Switch, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Näytössä ei ole signaalia. |
|
|
| Kaukosäädin ei toimi. |
|
|
| Välkkyvä tai vääristynyt kuva. |
|
|
8. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | CS 1-5 L |
| Merkki | Maxtrack |
| Tulot | 5 x HDMI |
| Lähtö | 1 x HDMI |
| Tuetut resoluutiot | Up to 4K @ 30Hz, Full HD (1080p), 3D |
| HDCP-tuki | Kyllä |
| Syvä väri | 48-bittinen |
| Kaistanleveys | 340 MHz |
| Tiedonsiirtonopeus | 10.2 Gbps |
| Ääniformaatit | Supports uncompressed audio (e.g., LPCM) |
| Valvontamenetelmät | Manual button, IR Remote Control |
| Tuotteen mitat | 190D x 25W x 90H millimeters (19 x 2.5 x 9 cm) |
| Paino | 120 g |
| Väri | Musta |
| Liittimen tyyppi | HDMI |
| Yhteensopivat laitteet | DVD Player, Gaming Console, Television |
9. Takuu ja tuki
Takuutietoja ja teknistä tukea varten katso ostoksesi mukana toimitettuja asiakirjoja tai ota yhteyttä jälleenmyyjään. Säilytä ostokuittisi mahdollisia takuuvaatimuksia varten.