Meister 7474090 Digital Timer User Manual

Johdanto

This manual provides detailed instructions for the safe and efficient operation of your Meister 7474090 Digital Timer. This device is designed to automate the switching of electrical appliances, offering features such as daily programming, a countdown function, and a random generator for presence simulation. Please read this manual thoroughly before use and retain it for future reference.

Turvallisuustiedot

• The timer is designed for indoor use only.
• Ensure the total load of connected devices does not exceed the maximum rated power of 3600 W.
• Älä upota laitetta veteen äläkä altista sitä liialliselle kosteudelle.
• The built-in NiMH battery ensures data retention during power outages. This battery is not user-replaceable.
• The device features touch protection for safe household use, tested according to GS quality standards.
• Älä avaa tai yritä korjata laitetta itse. Jätä kaikki huoltotyöt pätevän henkilöstön tehtäväksi.

Asennus

Before initial use, plug the timer into a live socket for approximately 4 hours to charge the internal NiMH battery. This ensures that the display and programmed settings are retained even when the timer is unplugged.

Kellonajan asettaminen

1. Paina KELLO -painiketta. Näytössä näkyy nykyinen aika.
2. Paina SARJA -painiketta siirtyäksesi ajan asetustilaan. Tunnit vilkkuvat.
3. Käytä PROG/+ ja - painikkeita säätääksesi tuntia.
4. Paina SARJA again to move to the minute setting. Adjust with PROG/+ ja -.
5. Paina SARJA again to move to the day of the week setting. Adjust with PROG/+ ja -.
6. Paina KELLO poistuaksesi asetustilasta.

You can switch between 12-hour and 24-hour display modes by pressing the KELLO button while in normal time display mode. To switch between summer and winter time, press the KELLO -painiketta ja MANUAALINEN painiketta samanaikaisesti.

Käyttöohjeet

Programming Timer Events (10 Programs)

The timer allows you to set up to 10 ON/OFF programs. Each program can be configured for specific days of the week or combinations of days.

1. Paina PROG/+ -painiketta siirtyäksesi ohjelman asetustilaan. Näytössä näkyy "1 ON".
2. Käytä PROG/+ ja - buttons to select the desired program number (1-10) and whether you are setting an ON or OFF time.
3. Paina SARJA to adjust the day(s) of the week. Use PROG/+ to cycle through various day combinations (e.g., Mon-Fri, Sat-Sun, Mon-Sun, individual days).
4. Paina SARJA to adjust the hour for the ON/OFF event. Use PROG/+ ja -.
5. Paina SARJA to adjust the minute for the ON/OFF event. Use PROG/+ ja -.
6. Repeat for all 10 ON/OFF programs as needed.
7. Paina KELLO to exit program setting mode and return to normal time display.

Countdown-toiminto

The countdown function allows you to switch a connected device ON or OFF after a specified duration.

1. Paina CD button. The display will show "CD ON" or "CD OFF" and the countdown time.
2. Paina SARJA to adjust the countdown duration (hours, minutes, seconds) using PROG/+ ja -.
3. Paina CD again to start or stop the countdown.

Random Generator

The random generator function switches connected devices (e.g., lights) ON and OFF at irregular intervals, simulating presence to deter potential intruders.

• Paina RND button to activate or deactivate the random function. An "R" icon will appear on the display when active.
• When active, the timer will randomly switch the connected appliance ON and OFF within a set timeframe (typically between 6 PM and 6 AM, but this may vary by model; refer to the specific display indicators).

Manuaalinen ohitus

You can manually switch the connected device ON or OFF at any time, overriding current programs or functions.

• Paina MANUAALINEN button to cycle through ON, OFF, and AUTO modes.
• In ON mode, the device is continuously powered.
• In POIS mode, the device is continuously unpowered.
• In AUTO mode, the timer follows the programmed settings.

Huolto

The Meister 7474090 Digital Timer requires minimal maintenance.

• Puhdistus: Irrota ajastin pistorasiasta ennen puhdistamista. Pyyhi ulkopinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Akku: The internal NiMH battery is designed for data retention and does not require user maintenance or replacement. If the display is blank or settings are lost frequently, ensure the timer is plugged in for several hours to allow the battery to charge.
• Varastointi: Store the timer in a dry, dust-free environment when not in use.

Vianetsintä

• Näyttö on tyhjä: Plug the timer into a live socket for at least 4 hours to charge the internal NiMH battery.
• Timer does not switch ON/OFF as programmed:
  • Varmista, että ajastin on päällä AUTO mode (check the MANUAALINEN button setting).
  • Varmista, että nykyinen aika ja päivä on asetettu oikein.
  • Check that the ON/OFF programs are correctly entered and enabled for the desired days.
  • Ensure the connected appliance is functioning correctly and is switched ON.
• Satunnaisfunktio ei toimi: Varmista, että RND function is activated (the "R" icon should be visible on the display).
• Countdown function not working: Ensure the countdown duration is set and the function is activated by pressing the CD -painiketta.
• Device feels warm: This is normal during operation, especially with high-power appliances. However, if it feels excessively hot or emits smoke/odor, immediately unplug it and discontinue use.

Tekniset tiedot

• Mallinumero: 7474090
• Virtalähde: 230V/50Hz
• Nimellisteho: 3600 W
• Suojausluokka: IP20 (sisäkäyttöön)
• Minimum Switching Interval: 1 minuutti
• Ohjelmien määrä: 10 ON/OFF-ohjelmaa
• Sisäinen akku: NiMH (for data retention)
• Mitat: 12.3 x 7 x 6 cm (Length x Width x Depth)
• Paino: 180 g
• Materiaali: Muovi
• Väri: Valkoinen

Takuu ja tuki

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please contact Meister customer service through their official websivustolla tai tuotteen mukana toimitetuissa yhteystiedoissa.