Truma CP Plus Control Unit User Manual

Johdanto

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Truma CP Plus Control Unit. Please read this manual carefully before using the device to ensure safe and efficient operation. Keep this manual for future reference.

Turvallisuusohjeet

Noudata aina seuraavia turvatoimia:

• Varmista, että virtalähde on irrotettu ennen asennusta tai huoltoa.
• Asennuksen saa suorittaa vain pätevä henkilöstö.
• Älä altista laitetta äärimmäisille lämpötiloille tai kosteudelle.
• Älä yritä korjata laitetta itse. Ota yhteyttä pätevään huoltohenkilöstöön.
• Use only original Truma accessories and spare parts.

Tuote loppuview

The Truma CP Plus is a central control unit designed for Truma heating and air conditioning systems in recreational vehicles. It allows for precise control and monitoring of various climate functions.

Kuva 1: Edessä view of the Truma CP Plus Control Unit. The display shows a temperature of 22 degrees Celsius, with icons indicating heating, water heater, and fan functions. A rotary knob is located below the display, and a return button is on the left. The unit is labeled "Truma iNet ready".

Asennus

1. Ohjausyksikön asentaminen

Choose a suitable location for mounting the control unit, ensuring it is easily accessible and visible. Avoid direct sunlight or heat sources. Secure the unit using appropriate screws (not included) through the designated mounting holes.

2. Sähköliitäntä

Connect the Truma CP Plus to your vehicle's 12V power supply and to the Truma heating/air conditioning system using the provided wiring harness. Ensure correct polarity. Refer to the wiring diagram in your system's main manual for detailed connection points.

• Punainen lanka: +12V DC
• Musta lanka: Maa (GND)
• Data bus wires: Connect to the Truma iNet Box or directly to compatible appliances.

3. Ensimmäinen käynnistys

Once all connections are secure, switch on the 12V power supply. The unit display should illuminate. Follow the on-screen prompts for initial setup, including language selection and system pairing.

Käyttöohjeet

1. Liikkuminen valikossa

Use the rotary push button to navigate through the menu options. Turn the knob to scroll and press to select. The back button (left of the knob) returns to the previous screen.

2. Lämpötilan asetus

From the main screen, turn the rotary knob to adjust the desired room temperature. The new temperature will be displayed and automatically set.

3. Käyttötilan valitseminen

Press the rotary knob to enter the main menu. Select "Operating Mode" to choose between heating, hot water, or combined modes. Available options depend on connected Truma appliances.

4. Ajastin

Access the "Timer" menu to program specific heating or hot water times. You can set start and end times, and desired temperatures for different periods.

5. Tuulettimen nopeuden säätö

If connected to a Truma air conditioning system, navigate to the "Fan" menu to adjust fan speed settings (e.g., Eco, Night, High).

Huolto

The Truma CP Plus Control Unit requires minimal maintenance. Follow these guidelines to ensure longevity:

• Puhdistus: Pyyhi näyttö ja casing pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Ohjelmistopäivitykset: Periodically check the Truma website or consult your dealer for available software updates for your unit. Updates can improve performance and add new features.
• Liitännät: Tarkasta vuosittain kaikkien sähköliitäntöjen tiiviys ja korroosio.

Vianetsintä

If the problem persists after attempting the above solutions, please contact Truma customer support or an authorized service partner.

Tekniset tiedot

• Merkki: Truma
• Mallinumero: Reimo 721982
• ASIN: B087X7F78P
• Väri: Neutraali
• Virtalähde: 12V DC (typical for RV applications)
• Yhteensopivuus: Truma heating and air conditioning systems with iNet Box or compatible interfaces.
• Alkuperämaa: Sveitsi

Takuu ja tuki

For warranty information, please refer to the documentation provided with your Truma heating or air conditioning system, or visit the official Truma website. Truma does not provide specific information on spare parts availability or software update guarantees for this control unit directly in the product specifications.

For technical support, service, or to find an authorized Truma service partner, please visit the official Truma website or contact their customer service department. Always provide your model number (Reimo 721982) and ASIN (B087X7F78P) when seeking support.

Truma Official Websivusto: www.truma.com