KIINNITYS MU0025
MOUNTUP Monitor Mount Instruction Manual
Model: MU0025 | Brand: MOUNTUP
1. Johdanto
Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.
2. Turvallisuustiedot
Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.
- Älä ylitä suurinta sallittua painokapasiteettia, joka on 8 kg (17.6 lbs).
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
- Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
- Use all provided hardware and follow the installation steps precisely.
- Pidä lapset ja lemmikkieläimet loitolla asennuksen aikana.
3. Pakkausluettelo
Varmista, että kaikki osat ovat mukana ja ehjät ennen asennuksen aloittamista.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.
Paketin tulee sisältää:
- Monitor Arm Assembly (Upper and Lower Arms)
- Desk Pole
- C-Clamp Pohja
- Grommet Base Components
- VESA-levy
- All necessary screws, washers, and Allen keys
- Käyttöohje
4. Asennus ja asennus
Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp and Grommet mounting options.
4.1 C-Clamp Asennus
- Kiinnitä C-clamp base to the desk pole using the provided screws and Allen key.
- Position the assembled clamp and pole on the edge of your desk.
- Kiristä C-clamp Kierrä ruuvia, kunnes teline on tukevasti kiinni pöydässä. Varmista, että se on vakaa eikä heilu.
4.2 Grommet Installation
- Pura C-clamp by removing the screw and plate.
- Insert the desk pole through the grommet hole in your desk.
- Secure the pole from underneath the desk using the grommet base plate and tightening knob.
4.3 Attaching VESA Plate to Monitor
- Aseta näyttö varovasti kuvaruutu alaspäin pehmeälle ja puhtaalle alustalle.
- Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
- Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.
4.4 Attaching Monitor to Arm
- Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
- Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.
4.5 Kaapelin hallinta
Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.
4.6 Asennusvideo-opas
Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).
5. Käyttö ja säädöt
The MOUNTUP monitor arm offers full motion capabilities for optimal viewmukavuutta.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.
5.1 Kaasujousen jännityksen säätö
Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.
- If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
- If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.
5.2 Kallistuksen säätö
The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewkulmat.
- Loosen the tilting bolt on the VESA plate.
- Position the screen to your desired angle.
- Retighten the tilting bolt to fix the angle.
5.3 Swivel and Rotation
The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.
- Lower Arm Swivel: ±135°
- Upper Arm Swivel: ±180°
- Screen Swivel: ±90°
- Screen Rotation: 360°
5.4 Adjustment Video Guide
Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).
Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.
6. Huolto
Säännöllinen huolto varmistaa näyttötelineesi pitkän käyttöiän ja optimaalisen suorituskyvyn.
- Puhdistus: Pyyhi teline pehmeällä, d:lläamp liinalla. Vältä hankaavia puhdistusaineita tai liuottimia, jotka voivat vahingoittaa pintaa.
- Tarkastus: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
- Kaasujousi: If the gas spring tension feels off, refer to Section 5.1 for adjustment instructions.
7. Vianmääritys
Jos kohtaat ongelmia, tutustu seuraaviin yleisiin ongelmiin ja ratkaisuihin:
- Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
- Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
- Teline tuntuu epävakaalta tai heiluvalta: Varmista, että C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
- Vaikeus liikuttaa kättä: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.
Jos ongelmat jatkuvat, ota yhteyttä asiakastukeen.
8. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | MU0025 |
| Yhteensopiva näytön koko | 17-32 tuumaa |
| Paino Kapasiteetti | 4.4–17.6 paunaa (2–8 kg) |
| VESA-yhteensopivuus | 75x75mm, 100x100mm |
| Asennustyyppi | C-Clamp / Grommet Base |
| C-Clamp Pöydän paksuus | 0.39" - 3.15" (10-80 mm) |
| Grommet Desk Thickness | 0.39" - 3.15" (10-80 mm) |
| Läpivientireiän halkaisija | 0.39" - 2.36" (10-60 mm) |
| Materiaali | Teräs, alumiini, muovi |
| Väri | Musta |
| Max Height (from desk) | 22.64 tuumaa (57.5 cm) |
| Max laajennus | 19.8 tuumaa (50.3 cm) |
| Kallistusalue | +90° / -45° |
| Näytön kääntyvä | ±90° |
| Näytön kierto | 360° |
9. Takuu ja tuki
All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.