BAFANG C965 LCD Display User Manual

1. Johdanto

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Turvallisuustiedot

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Älä yritä avata tai muokata näyttöyksikköä. Tämä voi mitätöidä takuun ja aiheuttaa vahinkoa.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Vältä näytön altistamista äärimmäisille lämpötiloille tai suoralle auringonvalolle pitkiä aikoja.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki tarvittavat osat:

• BAFANG C965 LCD Display Unit
• Ohjaustangon kiinnike
• Ohjauspainikeyksikkö
• Käyttöopas (tämä asiakirja)

4. Asennus ja asennus

Follow these steps to install your BAFANG C965 LCD Display:

1. Näytön asennus: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Liitäntäkaapelit: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Käyttöohjeet

Once installed, operate your BAFANG C965 LCD Display as follows:

• Virta päälle/pois: Press and hold the power button on the external control unit to turn the display on or off.
• PAS-tason säätäminen: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Tietonäyttö: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Ajovalojen ohjaus: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Display Functions and Indicators

The C965 display provides various indicators and data points:

• Nopeusnäyttö: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Pariston ilmaisin: Näyttää akun jäljellä olevan varaustason.
• PAS-taso: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Mittarilukema: Shows trip distance and total odometer reading.
• Virran ilmaisin: Displays real-time motor power output.
• Aika: Current time or trip duration.
• Jarrutusindikaattori: Illuminates when brakes are applied.
• Virheilmaisin: Displays error codes if a system fault occurs.
• Ajovalojen virta päälle: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Huolto

To ensure the longevity and optimal performance of your C965 display:

• Puhdistus: Pyyhi näyttöruutu ja runko pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Vedenkestävyys: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• Lämpötila: Operate the display within its specified temperature range of -20°C to 60°C.
• Kaapelin tarkastus: Tarkista säännöllisesti kaikki kaapelit ja liittimet kulumisen tai vaurioiden varalta.

8. Vianmääritys

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Näyttö ei käynnisty:
  • Ensure the e-bike battery is charged and properly connected.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Varmista, että virtapainiketta on painettu oikein.
• Virheelliset nopeus-/matkalukemat:
  • Tarkista pyöräsi nopeusanturin ja magneetin oikea kohdistus ja puhtaus.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Näytetyt virhekoodit:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• Painikkeet eivät vastaa:
  • Check the connection of the external control button unit to the display.
  • Varmista, etteivät painikkeet ole fyysisesti jumissa.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Tekniset tiedot

10. Takuu ja tuki

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG websivustolta asiakaspalvelun yhteystiedot.