TICCI T8VB Vibrating Alarm Watch User Manual

Johdanto

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Turvallisuustiedot

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Älä yritä avata kelloa casing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Tuote loppuview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

Kuva 1: Etuosa view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Painike A: Mode Selection / Backlight
Painike B: Set / Adjust Up
Painike C: Adjust Down / Start/Stop (Stopwatch/Countdown)
Painike D: Lukitse/Avaa

Asennus

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Kellonajan ja päivämäärän asettaminen

1. From the Time Mode display, press and hold Painike B for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. Paina Painike A to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Käyttää Painike B to increase the flashing value and Painike C vähentämään sitä.
4. Kun kaikki asetukset on säädetty, paina Painike B uudelleen poistuaksesi asetustilasta.
5. To switch between 12-hour and 24-hour format, press Painike C while the hour digits are flashing during time setting.

Käyttöohjeet

1. Tilan valinta

Paina Painike A repeatedly to cycle through the different modes:

• Aikatila: Näyttää nykyisen kellonajan, päivämäärän ja viikonpäivän.
• Hälytystila: Allows setting and managing up to 8 individual alarms.
• Sekuntikellotila: Ajanottotapahtumiin.
• Ajastintila: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Enter Hälytystila painamalla Painike A until "AL" appears on the display.
2. Paina ja pidä painettuna Painike B for approximately 2 seconds until the alarm number (1-8) flashes.
3. Käyttää Painike A to select the alarm you wish to set (A1, A2, A3, etc.).
4. Paina Painike B to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Käyttää Painike B to adjust the hour and Painike C säätääksesi minuutin.
6. Kellonajan asettamisen jälkeen paina Painike A to select the alarm type:
   • Molemmat: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. Paina Painike B to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use Painike A to select the alarm, then press Painike C to toggle its status.

3. Ajastin

The countdown timer can be set from 15 minutes up to 24 hours.

1. Enter Laskuritila painamalla Painike A until "TR" appears on the display.
2. Paina ja pidä painettuna Painike B for approximately 2 seconds until the hour digits flash.
3. Käyttää Painike B to adjust the hour and Painike C to adjust the minute for the countdown duration.
4. Paina Painike B to save the countdown setting.
5. Paina Painike C aloittaaksesi tai keskeyttääksesi lähtölaskennan.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Sekuntikello

1. Enter Sekuntikellotila painamalla Painike A until "ST" appears on the display.
2. Paina Painike C käynnistää sekuntikello.
3. Paina Painike C uudelleen pysäyttääksesi sekuntikellon.
4. Paina tauon aikana Painike B nollataksesi sekuntikellon.

5. Taustavalo

Paina Painike A briefly in any mode to activate the super bright EL backlight for easy viewheikossa valaistuksessa.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• Vastaanottaja Lukko the watch: Press and hold Painike B ja Painike C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• Vastaanottaja Avata the watch: Press and hold Painike B ja Painike C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Huolto

1. Vedenkestävyys

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is ei suositella for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Puhdistus

Puhdista kello ja ranneke säännöllisesti pehmeällä,amp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or seals.

3. Pariston vaihto

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Vianetsintä

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Painikkeet eivät reagoi: The watch may be in lockout mode. Press and hold Painike B ja Painike C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Vesi kellon sisällä: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Tekniset tiedot

Kuva 4: Kellon mitat.

Takuu ja tuki

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI websivusto.