EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Johdanto

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet. Jos jokin tuote puuttuu tai on vaurioitunut, ota yhteyttä jälleenmyyjään.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Low-profile Teline (pienille tietokoneille)
• 1 x ruuvimeisseli
• Kiinnitysruuvit
• 1 x Driver CD (or download instructions)

3. Asennus ja asennus

3.1 Laitteiston asennus

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Valmistele tietokoneesi: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Aseta verkkokortti paikalleen: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Suojaa kortti: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile Sulkumerkki.
6. Kiinnitä antennit: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Sulje tietokoneen kotelo: Replace the side panel of your PC case and reconnect the power cord.

3.2 Ohjaimen asennus

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Ohjain-CD:n käyttö: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Ohjainten lataaminen: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel website or the EDUP websivusto (szedup.com). Etsi drivers compatible with the Intel AX200 chipset.
3. Asennusprosessi: Suorita ladattu ohjainasennusohjelma files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Käyttöohjeet

4.1 Wi-Fi-yhteyden muodostaminen

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Valitse haluamasi Wi-Fi-verkko luettelosta.
3. Napsauta "Yhdistä" ja anna verkon suojausavain (salasana), jos sitä pyydetään.
4. Tietokoneesi pitäisi nyt olla yhteydessä Wi-Fi-verkkoon.

4.2 Bluetooth-laitteiden yhdistäminen

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Siirry kohtaan Windowsin asetukset > Laitteet > Bluetooth ja muut laitteet.
2. Varmista, että Bluetooth on kytketty päälle.
3. Napsauta "Lisää Bluetooth- tai muu laite" ja valitse "Bluetooth".
4. Siirrä Bluetooth -laite pariliitostilaan.
5. Valitse laitteesi luettelosta ja seuraa näytön ohjeita pariliitoksen muodostamiseksi.

5. Tekniset tiedot

6. Vianmääritys

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Ei havaittu Wi-Fi- tai Bluetooth-yhteyttä:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP websivusto.
• Heikko Wi-Fi-signaali tai hitaat nopeudet:
  • Adjust the position of the external antennas for better reception.
  • Varmista, että reitittimesi tukee Wi-Fi 6 (802.11ax) -protokollaa optimaalisen suorituskyvyn saavuttamiseksi.
  • Tarkista muiden elektronisten laitteiden aiheuttama häiriö.
  • Päivitä reitittimesi laiteohjelmisto.
• Bluetooth ei toimi:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Varmista, että Bluetooth on käytössä Windowsin asetuksissa.
  • Reinstall the Bluetooth driver.

7. Takuu ja tuki

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.