Max Sensor MXSA001

MAX MXSA001 315MHz TPMS -rengaspaineanturit Toyotalle Käyttöohje

Model: MXSA001 | Brand: Max Sensor

1. Johdanto

This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.

2. Turvallisuustiedot

  • Ammattimainen asennussuositus: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
  • Oikea vääntömomentti: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
  • Renkaan asennus: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
  • Yhteensopivuus: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
  • Akun kesto: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.

3. Pakkauksen sisältö

Jokainen paketti sisältää:

  • 4 x MAX MXSA001 315MHz TPMS Sensors
  • 4 x Silver Aluminum Valve Stems (pre-attached to sensors)
Four MAX MXSA001 TPMS sensors with silver aluminum valve stems, arranged on a white background.

Kuva 3.1: Päättynytview of four MAX MXSA001 TPMS sensors.

4. Asennus ja asennus

Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.

4.1 Asennusta edeltävä tarkistus

  • Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
  • Inspect each sensor for any visible damage before installation.

4.2 Anturin kiinnitys

  1. Irrota rengas vanteesta.
  2. Carefully remove the old TPMS sensor and valve stem.
  3. Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
  4. Secure the valve stem nut from the outside, tightening it to 4 Nm (35 in-lbs). Älä kiristä liikaa.
  5. Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
  6. Mount the tire back onto the wheel, taking care not to damage the sensor.
  7. Täytä rengas valmistajan suosittelemaan paineeseen.
Lähikuva view of a single MAX MXSA001 TPMS sensor, showing the black sensor body, silver valve stem, and printed specifications like 'Max.9Bar/130Psi' and '4Nm'.

Figure 4.2.1: Close-up of a single MXSA001 sensor.

Sivu view of a MAX MXSA001 TPMS sensor, highlighting the angle of the valve stem attachment to the sensor body.

Kuva 4.2.2: Sivu view of the sensor and valve stem.

4.3 TPMS Relearn Procedure

After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or