1. Tuote ohiview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Kuva 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Turvallisuusohjeet
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Yleinen turvallisuus
- Käytä aina asianmukaisia henkilökohtaisia suojavarusteita (PPE), kuten suojalaseja ja käsineitä.
- Ensure the pump is placed on a stable, level surface to prevent tipping.
- Pidä lapset ja luvattomat henkilöt poissa käyttöalueelta.
- Älä käytä pumppua räjähdysvaarallisissa tiloissa, kuten syttyvien nesteiden, kaasujen tai pölyn läsnä ollessa.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Sähköturvallisuus
- Varmista virtalähteen voltage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Pakkauksen sisältö
Varmista pakkauksen purkamisen yhteydessä, että kaikki alla luetellut osat ovat mukana ja vahingoittumattomia:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x painekytkin
- 1 x Stainless Steel Hose
- 1 x painemittari
- 1 x Three-way Brass Fitting
- Käyttöopas (tämä asiakirja)
4. Tekniset tiedot
| Erittely | Arvo |
|---|---|
| Mallinumero | TWP47506 |
| Tyyppi | Self-priming Automatic Jet Pump |
| Nimellisteho | 750 W (1.0 HV) |
| Voitage | 220-240V |
| Taajuus | 50 Hz |
| Max pää | 45 metriä |
| Max Flow | 60 litraa/minuutti |
| Max imu | 9 metriä |
| Putken halkaisija | 1 x 1 tuumaa |
| Moottorin tyyppi | Copper Wire Induction Motor (Brushless) |
| Juoksupyörän materiaali | Ruostumaton teräs |
| Pumppu Casing-materiaali | Valurauta |
| Kaapelin pituus | 0.3 metriä |
| Tank Capacity (Cylindrical) | 24 litraa |
| Tuotteen mitat (P x L x K) | 30 x 19 x 22 cm |
| Tuotteen paino | 1.5 kg |
| Väri | Hopea |
5. Asennus ja asennus
5.1 Sijoitus
- Position the pump on a firm, level, and dry surface.
- Ensure adequate ventilation around the pump to prevent overheating.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Putkien liittäminen
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Imuputki: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Poistoputki: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Pumpun esitäyttö
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Sähköliitäntä
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Käyttö
6.1 Pumpun käynnistäminen
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Automaattinen käyttö
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Pumpun pysäyttäminen
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Huolto
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Säännölliset tarkastukset
- Tarkista virtajohto ja pistoke vaurioiden varalta.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Kuuntele käytön aikana epätavallisia ääniä, jotka voivat viitata ongelmaan.
7.2 Puhdistus
Pyyhi pumpun ulkopinta mainoksellaamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Talvivalmistelu (kylmään ilmastoon)
Jos pumppu altistuu jäätymislämpötiloille, se on tyhjennettävä vaurioiden välttämiseksi:
- Irrota virtalähde.
- Tyhjennä kaikki vesi pumpusta casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Säilytä pumppua kuivassa, pakkaselta suojatussa paikassa.
8. Vianmääritys
Ennen kuin otat yhteyttä asiakastukeen, katso seuraavasta taulukosta yleisiä ongelmia ja ratkaisuja.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pumppu ei käynnisty | Ei virtalähdettä Viallinen virtajohto/pistoke Motor overload protection tripped |
Tarkista virtaliitäntä ja pistorasia Tarkista ja vaihda, jos vaurioitunut Allow motor to cool, then restart. Check for blockages. |
| Pumppu käy, mutta vettä ei tule | Pumppua ei ole täytetty Ilmavuoto imuputkessa Imukorkeus liian korkea Foot valve clogged or stuck Vesilähde tyhjä |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| Alhainen virtaus tai paine | Partial blockage in pipes/impeller Ilmavuoto imuputkessa Kulunut juoksupyörä Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Ota yhteyttä pätevään huoltohenkilöstöön Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Pump cycles on and off frequently | Leak in discharge system Pressure tank pre-charge incorrect Viallinen painekytkin |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Takuu ja tuki
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.