Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Johdanto

Kiitos ostoksestasiasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Turvallisuustiedot

• Pidä tämä tuote aina kuivana. Älä käytä sateessa tai damp ehdot.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• Pidä poissa lasten ulottuvilta.
• Älä käytä salamalaitetta syttyvien kaasujen, kemikaalien tai muiden materiaalien lähellä.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Tuote ohiview

3.1 Tärkeimmät ominaisuudet

• Täysi TTL-toiminnallisuus: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Tehokkaat toiminnot: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Langaton ryhmittelyjärjestelmä: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Ylikuumenemissuoja: Designed with protection against overheating for extended use.
• Tehokas suorituskyky: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Zoomaustoiminto: Automaattinen ja manuaalinen zoom 24 mm:stä 105 mm:iin.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Laaja yhteensopivuus: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Pakkauksen sisältö

• 1 x Godox TT350N Flash Unit
• 1 x Miniteline
• 1 x suojakotelo
• 1 x Color Filter
• 1 x Käyttöohje
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Osien nimet ja toiminnot

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoomauksen valintapainike
2. Tilan valintapainike
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Testipainike/salamavalmiusilmaisin
5. LCD-paneeli
6. Nopea synkronointipainike
7. S1/S2 Optiikan orjan liipaisun valintapainike (ei-langattomassa tilassa)
8. Group/Channel Button (reusable button, in wireless mode)
9. Virtakytkin
10. Lukitusrengas
11. Langaton valintapainike (uudelleenkäytettävä painike, paina pitkään 2 sekuntia)
12. hotshoe
13. Aseta painike
14. Valitse Soita
15. Paristokotelo
16. Optinen ohjausanturi
17. Tarkennusapuvalo
18. Salamapää
19. Catchlight paneeli
20. Sisäänrakennettu laajakuvapaneeli

4. Asennus

4.1 Akun asennus

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Avaa salamalaitteen sivussa sijaitsevan paristolokeron kansi.
2. Aseta kaksi AA-paristoa lokeroon napaisuusmerkkien (+/-) mukaisesti.
3. Sulje paristolokeron kansi kunnolla.

4.2 Kiinnitys kameraan

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Virta päälle/pois

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Sammuta virta liu'uttamalla virtakytkin 'OFF'-asentoon.

5. Toimintatilat

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE -painiketta selataksesi käytettävissä olevia tiloja.

5.1 TTL-automaattisalamatila

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Paina MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manuaalinen salamatila (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Paina MODE button until 'M' is displayed.
• Käännä Valitse Soita to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Paina MODE button until 'Multi' is displayed.
• Käytä Valitse Soita ja SARJA button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Nopea synkronointi (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Paina SYNK button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Salamavalon korjaus (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• TTL-tilassa paina SARJA button. The FEC value will blink.
• Käännä Valitse Soita to adjust the FEC value.
• Paina SARJA painiketta uudelleen vahvistaaksesi.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Pääyksikkö: TT350N voi ohjata muita Godox-slave-yksiköitä, kuten AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N ja TT600.
• Orjayksikkö: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Käytä GR/CH painiketta ja Valitse Soita to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• S1-tila: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• S2-tila: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the ORJA button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Paina pitkään C.Fn button for 2 seconds to enter the custom function settings menu.
• Käytä Valitse Soita to navigate through the available functions.
• Paina SARJA button to select a function and then use the Valitse Soita muuttaa sen arvoa.
• Paina SARJA button again to confirm the change.
• Paina pitkään C.Fn button again to exit the custom function settings.

8. Huolto

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Säilytä salama viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• Vältä voimakkaita iskuja tai laitteen pudottamista.

9. Vianmääritys

• Salama ei välähdä: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Langattoman liipaisun ongelmat: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Tekniset tiedot

11. Takuu ja tuki

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox websivusto. Säilytä ostokuitti takuuvaatimuksia varten.