Tärkeitä suojatoimenpiteitä
Please read all instructions before using the Breville Nespresso Vertuo machine. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Älä upota laitetta, virtajohtoa tai pistoketta veteen tai muihin nesteisiin.
- Tämä laite on tarkoitettu vain kotitalouskäyttöön.
- Irrota pistoke pistorasiasta, kun et käytä ja ennen puhdistusta.
- Älä käytä laitetta, jonka johto tai pistoke on vaurioitunut.
- Pidä laite ja sen johto poissa lasten ulottuvilta.
Tuote loppuview
The Breville Nespresso Vertuo machine is designed to brew both coffee and espresso with a single touch. It uses Nespresso Vertuo capsules and features Centrifusion™ technology for optimal extraction.
Image: Breville Nespresso Vertuo machine with key components labeled. This illustration shows the main body, water reservoir on the side, the capsule insertion area at the top, and the cup stand at the front.
Tärkeimmät komponentit:
- Vesisäiliö: Irrotettava säiliö makealle vedelle.
- Keittopää: Where the capsule is inserted and coffee is brewed.
- Kapselin pakkaus: Kerää käytetyt kapselit.
- Kupin tuki: Säädettävä eri kuppikoille.
- Start/Stop -painike: Initiates and stops brewing.
Asennus
- Pura kone pakkauksesta: Carefully remove all packaging materials and place the machine on a clean, stable, and level surface.
- Rinse the Water Tank: Wash the water tank with fresh drinking water before first use. Fill the tank with fresh water and place it back on the machine.
- Plug In the Machine: Connect the power cord to a grounded electrical outlet. The Start/Stop button will blink as the machine heats up.
- Ensimmäinen käyttökerta Huuhtele: Before brewing your first coffee, perform a rinse cycle. Ensure the water tank is full. Place a container (at least 0.5L) under the coffee outlet. Close the brewing head. Press the Start/Stop button three times quickly within 2 seconds. The button will blink during the rinse cycle. This process cleans the internal system.
Image: A hand holding the water tank, filling it under a faucet. This shows the transparent water tank being filled with water.
Käyttöohjeet
- Täytä vesisäiliö: Varmista, että vesisäiliö on täytetty raikkaalla juomavedellä.
- Laita kone päälle: Press the Start/Stop button. The button will glow steadily when ready.
- Kapselin asettaminen: Lift the lever to open the brewing head. Insert a Nespresso Vertuo capsule with the dome side down. Close the brewing head and lock the lever.
- Sijoitus Cupissa: Place a suitable cup under the coffee outlet. Adjust the cup support if necessary.
- Aloita panimo: Press the Start/Stop button. The machine will automatically read the barcode on the capsule and brew the coffee or espresso to the optimal size and temperature.
- Stop Brewing (Optional): To stop the brewing process manually, press the Start/Stop button again.
- Kapselin poisto: After brewing, lift the lever to open the brewing head. The used capsule will automatically be ejected into the used capsule container.
Image: A hand placing a Nespresso Vertuo capsule into the open brewing head of the machine. The capsule is dome-shaped.
Huolto
Puhdistus
- Päivittäinen siivous: Empty and rinse the used capsule container and drip tray daily. Wipe the machine exterior with a damp kangas.
- Vesisäiliö: Pese vesisäiliö säännöllisesti miedolla pesuaineella ja huuhtele huolellisesti.
- Kahvin myyntipiste: Perform a rinse cycle (without a capsule) regularly to clean the coffee outlet.
kalkinpoisto
Descaling is essential to maintain the machine's performance and ensure optimal coffee temperature. The machine will indicate when descaling is needed (e.g., orange light or specific blinking pattern).
- Kalkinpoistoliuoksen valmistus: Refer to the Nespresso descaling kit instructions. Fill the water tank with the descaling solution and water as directed.
- Enter Descaling Mode: Turn off the machine. Press and hold the Start/Stop button for 7 seconds until it blinks rapidly.
- Aloita kalkinpoisto: Place a large container (at least 1L) under the coffee outlet. Press the Start/Stop button to begin the descaling cycle. The machine will run through several cycles.
- Huuhtelujakso: After the descaling solution is used, rinse the water tank thoroughly and fill it with fresh water. Press the Start/Stop button to perform a final rinse cycle.
- Exit Descaling Mode: Press and hold the Start/Stop button for 7 seconds to exit descaling mode.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| No coffee flows. | Water tank empty; machine not heated; brewing head not closed. | Fill water tank; wait for machine to heat up; close brewing head completely. |
| Kahvi on kylmää. | Machine needs descaling; cup not preheated. | Perform descaling procedure; preheat cup with hot water. |
| Kone vuotaa. | Water tank not properly seated; capsule damaged. | Ensure water tank is correctly positioned; use an undamaged capsule. |
| Start/Stop button blinks rapidly. | Machine error; descaling required. | Unplug and replug the machine; perform descaling if indicated. |
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallin nimi | Nespresso Vertuo |
| Merkki | Breville |
| Tehoa | 120V, 60Hz, 1300W (typical) |
| Vesisäiliön kapasiteetti | Noin 1.2 litraa |
| Mitat (LxSxK) | Noin 5.5 x 16.7 x 12.4 tuumaa (14 x 42.3 x 31.4 cm) |
| Paino | Noin 9.7 lbs (4.4 kg) |
| Kapselin yhteensopivuus | Nespresso Vertuo capsules only |
Takuu ja tuki
This Breville Nespresso Vertuo machine, being a renewed product, typically comes with a limited warranty provided by the refurbisher (e.g., Amazon Renewed). Please refer to the specific warranty documentation included with your purchase for details on coverage duration and terms.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the customer support of the seller or refurbisher. You may also visit the official Nespresso website for general product information and FAQs.
- Amazonin uudistettu tuki: Visit Amazon Renewed Help
- Nespresson virallinen Websivusto: www.nespresso.com
