TOOWELL Update Daylight Motion Sensor Light

TOOWELL-liiketunnistimen kattovalon käyttöohje

Model: Update Daylight Motion Sensor Light

Merkki: TOOWELL

1. Johdanto

Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.

2. Tuote ohiview

Tärkeimmät ominaisuudet

  • Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
  • Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
  • Kirkkaus: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
  • Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
  • Langaton ja helppo asentaa: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.

Mitä laatikossa on

  • 1 x Battery powered ceiling light
  • Mounting hardware (screws, anchors, fixing plug)
  • Paristot EIVÄT sisälly.

Tuotekuvat

TOOWELL Motion Sensor Ceiling Light with motion sensor visible
The TOOWELL Motion Sensor Ceiling Light, showcasing its sleek design and integrated motion sensor.
Key features of the TOOWELL Motion Sensor Ceiling Light including lumens, motion activation, auto-off, and battery life
Yliview of the light's key features: 400 Lumens, 19ft motion activated, 20 seconds auto-off, and 180 days long-lasting battery life.
Diagram showing easy no-wire installation and battery compartment for 4 D-cell batteries
Illustration of the easy, no-wire installation process, highlighting the compartment for 4 D-cell batteries (not included).
Comparison of Daylight Mode and Night Mode operation for the motion sensor light
Visual representation of the Daylight Mode (motion activates light all day) and Night Mode (motion activates light only in darkness) settings.
Examples of the motion sensor light used in a closet, pantry, bathroom, and laundry room
Erilaisia ​​sovelluksia esim.amples, showing the light installed in a closet, pantry, bathroom, and laundry room.
Diagram illustrating the 120-degree detection angle and 19ft maximum detection range of the motion sensor
Detailed diagram showing the 120-degree detection angle and maximum 19ft detection range of the motion sensor.

3. Asennus ja asennus

The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:

  1. Valmistele valo: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
  2. Asenna paristot: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
  3. Diagram showing how to insert 4 D-cell batteries into the light unit
    Insert 4 D-cell batteries into the designated slots, ensuring correct polarity.
  4. Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
  5. Diagram showing how to twist the back plate to secure it to the light unit
    Twist the back plate clockwise until it locks securely into place.
  6. Pohjalevyn kiinnitys: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
  7. Diagram showing the mounting plate being screwed into a ceiling
    Securely screw the mounting plate to your desired ceiling or wall location using the provided hardware.
  8. Kiinnitä valoyksikkö: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
  9. Diagram showing the light unit being twisted onto the mounted plate
    Attach the light unit to the mounted plate by twisting it clockwise until it locks.
  10. Poista suojakalvo: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.

4. Käyttöohjeet

Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:

  • Päivänvalotila: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
  • Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.

The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.

5. Huolto

  • Akun vaihto: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
  • Puhdistus: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
  • LED-elinikä: The integrated LED lights are designed for a long lifespan and do not require replacement.

6. Vianmääritys

OngelmaMahdollinen syyRatkaisu
Valo ei syty.1. Paristot ovat tyhjiä tai asennettu väärin.
2. Light mode is set incorrectly for ambient light conditions.
3. Ei havaittu liikettä kantaman sisällä.
1. Replace batteries and ensure correct polarity.
2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode.
3. Ensure motion is within 20 feet and 120-degree detection angle.
Valo palaa jatkuvasti.1. Jatkuvaa liikettä havaittu.
2. Light mode is set to 'Daylight' in a constantly bright area.
1. Ensure no continuous motion is within the sensor's range.
2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness.
Valo on hämärää.Paristot ovat vähissä.Replace all 4 D-cell batteries.
Liiketunnistin ei reagoi.1. Anturi on peittynyt tai likainen.
2. Väärä asennuskorkeus.
1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor.
2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft).

7. Tekniset tiedot

ErittelyArvo
MerkkiLIIAN HYVIN
MalliUpdate Daylight Motion Sensor Light
Valonlähteen tyyppiLED (SMD2835)
Kirkkaus400 lumenia
Värilämpötila5000 kelviniä
Virtalähde4 D-cell Batteries (Not Included)
Liiketunnistimen kulma120 astetta
Liiketunnistuksen kantamaJopa 20 jalkaa
Automaattinen sammutusajastin20 sekuntia (liikkeettömyyden jälkeen)
Tuotteen mitat7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H)
Tuotteen paino14.4 unssia
MateriaaliAkryylinitriilibutadieenistyreeni (ABS)
AsennustyyppiHuuhtele kiinnitys
Sisä-/ulkokäyttöVain sisäkäyttöön

8. Takuu ja tuki

Takuutiedot

Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.

Asiakastuki

If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL websivusto.

When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.

© 2024 TOOWELL. All rights reserved.