Cooler Master MasterBox CM694 TG PC Case Instruction Manual

Johdanto

This manual provides detailed instructions for the assembly, operation, and maintenance of your Cooler Master MasterBox CM694 TG Middle Tower PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Tärkeimmät ominaisuudet

• Curved Mesh Panels: Front and top mesh panels with a diamond pattern for optimal breathability and dust filtration.
• Karkaistusta lasista valmistettu sivupaneeli: Tarjoaa selkeän view sisäisistä komponenteista.
• Modular Drive Cage: Updated design for enhanced storage expandability, supporting 2.5" SSDs and 3.5" HDDs.
• Dual 5.25" Bays: Accommodates optical drives or other 5.25" devices.
• Graphics Card Stabilizer: Arm mechanism to support large graphics cards, preventing motherboard distortion and ensuring safe transport.
• Emolevyn yhteensopivuus: Supports E-ATX, ATX, microATX, and Mini-ITX motherboards.
• Nestejäähdytyksen tuki: Accommodates up to 360mm water cooling radiators.
• Expansion Card Clearance: Space for expansion cards up to 410 mm (16.1 inches).
• Power Supply Cover: Integrated cover to conceal the power unit for a cleaner build.
• Full I/O Ports: Features 2 x USB 3.0, 1 x USB 3.1 (Gen 2) Type-C, and a 4-pole headset jack with rubber dustproof caps.

Asennus

1. Kotelon purkaminen pakkauksesta

Carefully remove the PC case from its packaging. Inspect for any damage during transit. Retain all packaging materials for future transport or warranty claims.

Kuva 1: Etuosa view of the Cooler Master MasterBox CM694 TG PC Case.

2. Sivupaneelien irrottaminen

Locate the thumbscrews on the rear of the case securing the tempered glass side panel. Unscrew them and carefully remove the panel. Repeat for the opposite steel side panel if necessary.

Kuva 2: Sivu view of the PC case featuring the tempered glass panel.

3. Emolevyn asennus

Install the appropriate standoffs for your motherboard form factor (E-ATX, ATX, microATX, Mini-ITX). Carefully place your motherboard onto the standoffs and secure it with screws.

Kuva 3: Sisustus view of the PC case, showing the motherboard tray and drive bays.

4. Virtalähteen asennus

Mount your ATX power supply in the designated compartment at the bottom rear of the case. Secure it with screws from the exterior.

5. Aseman asennus

Utilize the modular drive cages for 2.5" SSDs and 3.5" HDDs. The case also features two 5.25" bays for optical drives or other accessories. Refer to the specific drive cage mechanism for tool-less or screw-based installation.

Kuva 4: Yksityiskohtainen sisustus view highlighting the modular drive cages.

6. Näytönohjaimen ja laajennuskortin asentaminen

Install your graphics card and other expansion cards into the PCIe slots on the motherboard. Use the included graphics card stabilizer for larger cards to prevent sagging.

7. Jäähdytysjärjestelmän asennus

The MasterBox CM694 TG supports various cooling configurations. Install additional fans or liquid cooling radiators as needed. The case supports up to 360mm radiators.

Figure 5: Diagram illustrating fan and radiator mounting locations and sizes.

8. Kaapelien hallinta

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and a clean aesthetic.

Toiminnassa

Once all components are installed and secured, connect your peripherals and power cable. Press the power button on the front I/O panel to start your system.

Etu I/O-paneeli

• Virtapainike: Initiates system startup.
• Reset-painike: Käynnistää järjestelmän uudelleen.
• USB 3.0 -portit (x2): Nopeaan tiedonsiirtoon yhteensopivien laitteiden kanssa.
• USB 3.1 (Gen 2) Type-C Port (x1): For fast data transfer and device connectivity.
• 4-Pole Headset Jack: Supports simultaneous audio input and output for headsets.

Kuva 6: Yläosa view of the PC case, showing the front I/O panel with various ports and buttons.

Huolto

Pölysuodattimen puhdistus

The MasterBox CM694 TG features mesh panels that act as dust filters. Regularly clean these panels to maintain optimal airflow and prevent dust buildup inside the case. Gently remove the panels and use compressed air or a soft brush to clear dust.

Yleissiivous

Käytä pehmeää, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents that could damage the finish. For the tempered glass panel, use a glass cleaner and a microfiber cloth.

Vianetsintä

• Järjestelmä ei käynnisty:
  • Ensure the power supply is switched on and properly connected to the wall outlet and motherboard.
  • Check all front panel connectors (power switch, reset switch) are correctly attached to the motherboard.
• Ei näyttölähtöä:
  • Verify that your monitor is connected to the graphics card (not the motherboard integrated graphics, unless intended).
  • Aseta näytönohjain ja RAM-moduulit uudelleen paikoilleen.
• Ylikuumeneminen:
  • Ensure all case fans are spinning and properly oriented for optimal airflow.
  • Puhdista pölysuodattimet ja sisäiset osat säännöllisesti.
  • Verify CPU cooler and thermal paste application.

Tekniset tiedot

Takuu ja tuki

For warranty information and technical support, please visit the official Cooler Master websivustolta tai ota yhteyttä paikalliseen jälleenmyyjään. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.

Verkkoresurssit: www.coolermaster.com