BAITHNA DC12V Motorcycle Anti-Theft Alarm Security System Instruction Manual

Johdanto

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BAITHNA DC12V Motorcycle Anti-Theft Alarm Security System. This electronic anti-theft alarm system is designed to protect your motorcycle from theft with its remote control capabilities, including engine start, anti-hijacking, and adjustable sensitivity.

Image: The complete BAITHNA DC12V Motorcycle Anti-Theft Alarm System, including the main unit, siren, two remote controls, and wiring harness, shown alongside a motorcycle to illustrate its application.

Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki seuraavat osat:

• Main Alarm Unit
• Siren/Horn
• Kaksi kaukosäädintä
• Wiring Harness with Fuse
• Käyttöohje (tämä asiakirja)

Kuva: Selkeä view of all individual components included in the BAITHNA DC12V Motorcycle Anti-Theft Alarm System package, including the main control unit, siren, two remote fobs, and the wiring loom.

Asennusohjeet

Proper installation is crucial for the optimal performance of the alarm system. It is recommended that installation be performed by a qualified technician.

Tärkeitä huomautuksia ennen asennusta:

• This product defaults to AC ignition mode.
• Before installation, confirm whether your motorcycle uses AC or DC ignition mode.
• If your DC ignition mode motorcycle is being installed with an "AC ignition mode alarm," you will need to purchase an additional relay. Refer to the "DC ignition motorcycle—B wiring diagram" for details.
• Install according to the provided wiring diagrams to prevent circuit damage.
• The main host device is made of waterproof silicone, offering improved waterproofing.

Kytkentäkaaviot:

Refer to the following diagrams for correct wiring connections based on your motorcycle's ignition type.

Image: Detailed wiring diagrams illustrating connections for both AC ignition (Diagram A) and DC ignition (Diagram B) motorcycles. Diagram B highlights the need for a normal close relay for DC ignition systems when using an AC ignition alarm.

Image: An additional wiring diagram (Diagram C) for sound and flash alarm, accompanied by a reminder section and technical parameters for the system.

Komponenttien tiedot:

Kuva: Lähikuva view of the inline fuse integrated into the wiring harness, essential for circuit protection.

Image: A close-up of the various wiring connectors, showing their design for secure and proper electrical connections.

Käyttöohjeet

The system is operated using the provided remote controls. Familiarize yourself with the remote's buttons and their functions.

Image: Two remote controls, each featuring buttons for arming, disarming, remote engine start, and alarm activation/deactivation.

Kaukosäätimen toiminnot:

• Viritys: Paina lukituspainike once to arm the alarm. The motorcycle will emit a sound, and the turn signals may flash.
• Asetuksen poistaminen: Paina lukituspainike once to disarm the alarm. The motorcycle will emit a sound, and the turn signals may flash.
• Moottorin kaukokäynnistys: Paina lightning bolt button twice quickly to start the engine remotely.
• Remote Engine Cut-Off / Anti-Hijacking: While the engine is running (either normally or via remote start), press the lukituspainike to cut off the engine and activate the alarm. This function is for emergency anti-hijacking.
• Alarm Activation (Panic Button): Paina kellon painike to activate the alarm siren and flashing lights immediately. Press again to stop.
• Säädettävä herkkyys: The alarm features 3 sensitivity levels. Consult the full product manual for specific instructions on adjusting sensitivity, as this may involve a sequence of button presses on the remote.

Esittelyvideo:

The following video demonstrates the alarm system's functionality, including arming and disarming.

Virallisia myyjän esittelyvideoita ei ole tällä hetkellä saatavilla upotettavaksi.

Huolto

• Kaukosäätimen pariston vaihto: If the remote control distance shortens or the LED indicator dims, replace the battery. The remote controls typically use 2* CR2025, 2* CR2016, or 27A batteries. Refer to the remote's internal markings for the exact battery type.
• Vedeneristys: The main alarm unit is designed with waterproof silicone. However, avoid submerging the unit in water or exposing it to extreme moisture for prolonged periods.
• Puhdistus: Clean the main unit and remote controls with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Johdon tarkastus: Periodically check all wiring connections for corrosion or loose contacts to ensure reliable operation.
• Erittäin alhainen virrankulutus: The system is designed for ultra-low power consumption to prevent battery drain. However, if the motorcycle is stored for extended periods, consider disconnecting the motorcycle battery or using a trickle charger.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

For warranty information or technical support, please refer to the product packaging or contact BAITHNA customer service directly. Contact details are typically available on the manufacturer's official websivuston kautta tai ostopaikkasi kautta.

Lisätietoja tai tutustuaksesi muihin tuotteisiin, käy osoitteessa BAITHNA Store on Amazon.