EOTECH XPS2 Holographic Weapon Sight XPS2-0 User Manual

1. Tuote ohiview & Ominaisuudet

The EOTECH XPS2-0 Holographic Weapon Sight is a compact and robust optic designed for rapid target acquisition and reliable performance. Its advanced holographic technology provides a clear and precise aiming solution for various shooting scenarios.

• EOTECH XPS2-0: Holographic Weapon Sight in black with 68MOA ring and (1) 1 MOA dot reticle.
• Asennuksen monipuolisuus: Compatible with both 1" weaver and MIL-STD 1913 rails, offering flexible mounting options.
• Säädettävä kirkkaus: Features 20 brightness settings to ensure optimal visibility in any lighting condition, from bright daylight to low-light environments.
• Kompakti muotoilu: Its small footprint leaves ample rail space for additional accessories such as rear iron sights or magnifiers.

2. Asennus

2.1 Tähtäimen kiinnittäminen

The XPS2-0 is designed for easy mounting on any 1" Weaver or MIL-STD 1913 rail. Ensure the rail is clean and free of debris before mounting. Use the provided thumb-bolt or Allen-type bolt to securely fasten the sight to your firearm's rail. Tighten the bolt firmly to prevent movement under recoil.

2.2 Akun asennus

The XPS2-0 uses a single CR123 battery. To install or replace the battery:

1. Unscrew the battery cap located on the front right side of the sight.
2. Insert the CR123 battery with the positive (+) end facing forward.
3. Kierrä paristokotelon kansi tiukasti kiinni.

The sight will flash when the battery is at 20% capacity, indicating it's time for replacement soon.

3. Tähtäimen käyttö

3.1 Power On/Off & Brightness Adjustment

The control buttons are located on the rear of the sight:

• Virran kytkeminen: Press either the 'Up' (▲) or 'Down' (▼) button.
• Kirkkauden säätäminen: Press the 'Up' (▲) button to increase brightness or the 'Down' (▼) button to decrease brightness. There are 20 settings available.
• Virran sammuttaminen: Simultaneously press both the 'Up' (▲) and 'Down' (▼) buttons.

3.2 Reticle Description

The XPS2-0 features a 68 MOA (Minute of Angle) ring with a 1 MOA dot in the center. This reticle design allows for quick target acquisition while maintaining precision.

3.3 Tuuli- ja korkeussäädöt

Adjustments for windage (left/right) and elevation (up/down) are located on the side of the sight. Each click provides a precise adjustment to the point of impact.

4. Huolto

To ensure the longevity and optimal performance of your EOTECH XPS2-0, regular maintenance is recommended:

• Linssien puhdistus: Use a soft, lint-free cloth and lens cleaning solution to gently wipe the optical surfaces. Avoid abrasive materials or excessive pressure.
• Puhdistusrunko: Wipe the sight's body with a damp liinalla lian ja noen poistamiseen. Vältä voimakkaita kemikaaleja.
• Varastointi: Store the sight in a dry, cool place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.

5. Vianmääritys

5.1 Alhaisen akun ilmaisin

When the battery life reaches approximately 20%, the reticle will flash upon power-up to indicate a low battery condition. Replace the CR123 battery promptly to ensure continued operation.

5.2 Reticle Blinking Under Recoil

If the reticle blinks or flickers during recoil, this is another indication of a low battery. Replace the battery to resolve this issue.

6. Tekniset tiedot

7. Takuu ja tuki

The EOTECH XPS2-0 Holographic Weapon Sight comes with a 10-year limited warranty from the manufacturer, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please refer to the official EOTECH websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa.

It is recommended to register your product online to ensure you are contacted in the event of any product issues and to facilitate warranty service.

8. Tärkeitä turvallisuustietoja

VAROITUS: Tämä tuote sisältää kemikaaleja, jotka Kalifornian osavaltion tiedetään aiheuttavan syöpää ja syntymävikoja tai muita lisääntymisvaurioita.