Danco 10672X Toilet Flange Repair Ring Instruction Manual

Johdanto

This manual provides detailed instructions for the proper installation and maintenance of the Danco 10672X Toilet Flange Repair Ring, also known as the HydroSeat. This product is designed to repair broken or damaged toilet flanges, address wobbly or leaking toilets, and ensure a secure, leak-free seal for your toilet.

The HydroSeat features a one-piece design with Sure Seal technology, incorporating a self-centering rubber funnel that accommodates various toilet and closet flange types. It includes a debris cover to prevent sewer gas escape and debris entry during toilet removal, and stainless steel bolts pre-locked for stability.

Tuote loppuview

The Danco 10672X Toilet Flange Repair Ring is a comprehensive solution for toilet flange issues. Key components include:

• Repair Ring Base: A sturdy metal ring designed to reinforce or replace a damaged flange.
• Self-Centering Rubber Funnel: Integrated into the base, this blue rubber component ensures a tight seal and proper alignment with the drain pipe.
• Stainless Steel Bolts: Pre-installed and locked into the base at a factory-set height for secure toilet attachment.
• Debris Cover: A temporary cover to prevent odors and debris during installation.
• Closet Floor Bolts, Washers, and Nuts: Additional hardware for securing the toilet.

Kuva 1: The Danco 10672X Toilet Flange Repair Ring. This image shows the metal repair ring with the integrated blue rubber funnel and two pre-installed stainless steel toilet bolts extending upwards.

Turvallisuustiedot

• Always turn off the water supply to the toilet before beginning any work.
• Käytä asianmukaisia ​​henkilönsuojaimia, kuten käsineitä ja silmäsuojaimia.
• Varmista, että työskentelyalue on hyvin tuuletettu.
• Handle tools carefully to prevent injury.
• Jos olet epävarma jostakin vaiheesta, ota yhteyttä pätevään putkimieheen.

Tarvittavat työkalut

• Säädettävä jakoavain tai pihdit
• Screwdriver (Phillips or Flathead, depending on existing hardware)
• Kittiveitsi tai kaavin
• Utility Knife (for wax ring)
• Bucket and Sponge (for water cleanup)
• New Wax Ring (not included with repair ring)
• Rätti tai pyyhe

Asennusohjeet

1. Valmistele WC: Turn off the water supply to the toilet. Flush the toilet to empty the tank and bowl. Disconnect the water supply line. Remove the toilet from its current position and place it aside carefully.
2. Clean the Flange Area: Scrape off any old wax ring material from the existing toilet flange and the base of the toilet. Ensure the floor around the flange is clean and dry.
3. Assess Existing Flange: If the existing flange is severely damaged or broken, the Danco 10672X repair ring will sit over it. If the existing flange is intact but needs reinforcement, the repair ring can still be used.
4. Position the Repair Ring: Place the Danco 10672X Toilet Flange Repair Ring over the drain pipe opening. Ensure the pre-installed stainless steel bolts are aligned with the toilet mounting holes. The self-centering rubber funnel should fit snugly into the drain pipe.
5. Secure the Repair Ring: If your existing flange has screw holes, you may use appropriate screws (not included) to secure the metal repair ring to the subfloor for added stability, though the toilet bolts typically provide sufficient clampvoimaa.
6. Install New Wax Ring: Place a new wax ring (with or without a horn, depending on preference) onto the base of the toilet or directly onto the Danco repair ring, centered over the rubber funnel.
7. Aseta WC:n asetukset: Carefully lift the toilet and align the holes in its base with the stainless steel bolts extending from the repair ring. Gently lower the toilet straight down onto the wax ring and repair ring. Do not rock the toilet.
8. Varmista WC:n kiinnitys: Install the provided washers and nuts onto the stainless steel bolts. Hand-tighten the nuts initially, then use a wrench to tighten them evenly, alternating between bolts, until the toilet is secure and does not wobble. Älä kiristä liikaa, as this can crack the toilet base.
9. Kytke vedensyöttö uudelleen: Reconnect the water supply line to the toilet tank. Turn on the water supply and check for leaks.
10. Testihuuhtelu: Flush the toilet several times to ensure proper function and check for any leaks around the base.

Huolto

The Danco 10672X Toilet Flange Repair Ring is designed for long-term, maintenance-free operation once properly installed. Regular maintenance involves:

• Periodically checking the toilet base for any signs of leaks or wobbling.
• Ensuring the toilet bolts remain securely tightened (without overtightening).
• Cleaning around the toilet base as part of routine bathroom cleaning.

Vianetsintä

Toilet is still wobbly after installation:

Ensure the toilet bolts are tightened evenly. If the floor is uneven, shims may be required under the toilet base (not included). Recheck the installation of the repair ring to ensure it is seated correctly.

Leaks around the base of the toilet:

This indicates a compromised seal. The toilet may need to be removed, and the wax ring and repair ring re-seated. Ensure the wax ring is properly compressed and the toilet is lowered straight down without rocking. Verify the rubber funnel is correctly seated in the drain pipe.

Difficulty aligning toilet bolts:

Ensure the repair ring is correctly oriented and centered over the drain pipe. The pre-installed bolts are designed to align with standard toilet mounting holes.

Tekniset tiedot

Takuu ja tuki

For specific warranty information or technical support regarding your Danco 10672X Toilet Flange Repair Ring, please refer to the official Danco website or contact Danco customer service directly. Keep your purchase receipt for warranty claims.

Danco Customer Service: Vieraile www.danco.com for contact details and further product information.