1. Tuote ohiview
The MiBOXER 8-Bay Smart Battery Charger is designed for efficient and safe charging of various rechargeable cylindrical batteries. It features an automatic LCD display that provides real-time charging data and multiple safety protections.
Kuva 1.1: Etuosa view of the MiBOXER 8-Bay Smart Battery Charger, showing the LCD display and eight individual battery slots.
2. Turvallisuustiedot
To ensure safe operation and prolong the life of your charger and batteries, please observe the following safety guidelines:
- The charger is constructed from PC Fire retardant material, designed for enhanced safety and heat dissipation.
- The charger includes electronic circuit design to prevent damage from improper use.
- In case of battery reversal or short-circuit, the LCD display will show an error symbol, and charging will automatically cease.
- The smart charger automatically stops charging once batteries are fully charged to prevent overcharging.
- The charger can activate over-discharged batteries. However, if a battery is damaged, the LCD will indicate an error, and charging will stop.
- Varmista riittävä tuuletus laturin ympärillä käytön aikana.
- Älä yritä ladata ei-ladattavia paristoja.
Figure 2.1: Illustration of the charger's flame-retardant material and heat dissipation design, emphasizing safety and durability.
3. Pakkauksen sisältö
Avattuasi pakkauksen tarkista, että kaikki alla luetellut osat ovat mukana:
- 1 x MiBOXER 8-Bay Smart Battery Charger (Batteries not included)
- 1 x virtalähde
- 1 x Käyttöohje
Figure 3.1: Contents of the MiBOXER Smart Charger package, including the charger unit, power adapter, and user manual.
4. Tuotteen ominaisuudet
The MiBOXER Smart Battery Charger offers a range of advanced features for optimal battery charging:
- 8-Bay Independent Charging: Charges up to eight different types of cylindrical batteries simultaneously without affecting each other.
- Automatic LCD Display: Large screen displays real-time information including voltage, current, charging time, mode, battery type, internal resistance, and charged capacity. The backlight dims after 1 minute of inactivity.
- Pikalataus: Single-channel charging current can be set up to 1.5A maximum.
- Intelligent Current Selection: Automatically or manually selects the optimum charge current for inserted batteries.
- Akun aktivointi: Capable of activating over-discharged batteries.
- Kattava suojaus: Includes protection against reverse polarity, short-circuiting, and overheating. Automatically stops charging upon full charge or detection of a damaged battery.
- Laaja yhteensopivuus: Supports a broad range of Li-ion, LiFePO4, Ni-MH, and Ni-Cd battery types.
- Kaksoisvirtalähde: Supports DC 12V/3A input, allowing for car charging (car charger not included).
Figure 4.1: Visual representation of key features including automatic repair for "0V" batteries, short circuit protection, automatic current selection, overheat protection, battery capacity measurement, and the 8-slot design.
Kuva 4.2: Esimamples of common applications for batteries charged by the MiBOXER charger, such as toy cars, wireless mice, flashlights, and cameras.
Figure 4.3: The charger's compatibility with DC 12V car charging, offering portability (car charger sold separately).
5. Asennus
Follow these steps to set up your MiBOXER Smart Battery Charger:
- Unpack the charger and all accessories from the box.
- Connect the provided power adapter to the DC 12V/3A input port on the back of the charger.
- Plug the power adapter into a standard wall outlet. The LCD display will illuminate.
- Carefully insert rechargeable batteries into the charging slots, ensuring correct polarity (positive (+) and negative (-) terminals align with the markings in the slots). The charger will automatically detect the battery type for Li-ion (4.2V) and Ni-MH/Ni-Cd (1.48V) batteries.
Figure 5.1: Detailed diagram showing the input port, LCD display, battery anode and cathode contacts, and the 'SLOT' and 'MODE' buttons.
6. Käyttö
Operating the MiBOXER Smart Battery Charger is intuitive:
6.1. Automatic Battery Detection
For Li-ion (4.2V) and Ni-MH/Ni-Cd (1.48V) batteries, the charger will automatically detect the battery type and begin charging. The LCD will display relevant charging information.
6.2. Manual Battery Type Selection
For Li-ion (4.35V) and LiFePO4 (3.6V) batteries, you need to manually select the battery type:
- Insert the battery into the desired slot.
- Paina AUKKO button to select the corresponding channel (C1-C8).
- Paina ja pidä painettuna MODE button to cycle through the battery types (Li-ion 4.35V, LiFePO4 3.6V). Release the button when the correct type is displayed.
- The charger will then begin charging with the selected parameters.
6.3. LCD-näytön ymmärtäminen
The LCD provides detailed information for each charging slot:
- Voitage (V): Nykyinen voltage akusta.
- Current (A/mA): Charging current being applied.
- Latausaika: Duration of the current charging cycle.
- Tila: Indicates the charging mode (e.g., CC for Constant Current, CV for Constant Voltagja).
- Akun tyyppi: Displays the detected or selected battery chemistry (e.g., Li-ion, Ni-MH, LiFePO4).
- Sisäinen vastus: Shows the internal resistance of the battery.
- Kapasiteetti (mAh): Displays the accumulated charged capacity.
- Prosenttitage (%): Indicates the approximate charge level.
7. Akun yhteensopivuus
The MiBOXER Smart Battery Charger is compatible with a wide range of cylindrical rechargeable batteries:
7.1. Li-ion / IMR / INR / ICR / LiFePO4 (3.6V) Batteries
- 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700 (up to 73mm long), 22500, 22650, 25500, 26500, 26650.
7.2. Ni-MH / Ni-Cd (1.48V) Batteries
- AA, AAA, AAAA, C, SC.
Figure 7.1: Visual guide to the extensive range of Li-ion and Ni-MH/Ni-Cd battery sizes compatible with the charger.
8. Vianmääritys
If you encounter issues with your MiBOXER Smart Battery Charger, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| LCD shows error symbol / Charging stops unexpectedly | Battery inserted with reversed polarity. Battery is short-circuited. Akku on vaurioitunut. | Varmista, että paristojen napaisuus on oikea. Remove the battery and check for external damage or shorting. Vaihda vaurioitunut akku. |
| Battery not charging (no display activity) | Charger not powered. Battery is severely over-discharged. Incorrect battery type selected (for manual types). | Tarkista virtalähteen liitäntä ja pistorasia. The charger may attempt to activate over-discharged batteries; allow time. If activation fails, the battery may be unrecoverable. Ensure correct battery type is manually selected for Li-ion (4.35V) or LiFePO4. |
| LCD backlight dims quickly | Normaali toiminta. | The LCD backlight is designed to dim after 1 minute of inactivity to save power. This is not a fault. |
9. Tekniset tiedot
Key technical specifications for the MiBOXER 8-Bay Smart Battery Charger:
- Malli: c8 battery charger
- Merkki: COSOOS
- Tuotteen mitat: 7.2 x 5.5 x 1.3 tuumaa (18.3 x 14 x 3.3 cm)
- Tuotteen paino: 13.4 unssia (0.38 kg)
- Tulo Voltage: DC 12V/3A
- Lähtö Voltage: 1.48V (Ni-MH/Ni-Cd), 4.2V (Li-ion), 4.35V (Li-ion), 3.6V (LiFePO4)
- Suurin latausvirta: 1.5A per channel (user selectable/automatic)
- Materiaali: PC Fire retardant material
- Lahden lukumäärä: 8 independent charging bays
10. Takuu ja tuki
For product support, technical assistance, or warranty inquiries, please contact the manufacturer, COSOOS. Refer to the product packaging or the official COSOOS websivustolta ajantasaisimmat yhteystiedot.
COSOOS is committed to providing quality products and customer satisfaction. Please retain your purchase receipt for warranty purposes.