EISL NI182SCR

EISL Speed NI182SCR Single-Lever Basin Mikseri Napauta

Käyttöohje

1. Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your EISL Speed NI182SCR Single-Lever Basin Mixer Tap. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.

2. Tuote ohiview

The EISL Speed NI182SCR is a chrome-plated single-lever basin mixer tap designed for kitchen use. It features a ceramic seal cartridge for durability and smooth operation, along with a 360-degree rotatable spout for enhanced flexibility.

Tärkeimmät ominaisuudet:

  • Single-lever basin sekoitinhana
  • Kromattu viimeistely
  • Equipped with a ceramic seal cartridge
  • 360-degree swivel spout
EISL Speed NI182SCR Single-Lever Basin Mikseri Napauta

Kuva 2.1: Päättynytview of the EISL Speed NI182SCR Single-Lever Basin Mixer Tap.

Components of the EISL Speed NI182SCR Tap and Instruction Manual

Figure 2.2: Included components for installation, including flexible connection hoses and the instruction manual.

3. Asennus ja asennus

The EISL Speed NI182SCR tap is designed for countertop, single-hole mounting. Ensure all necessary components are present before beginning installation.

Tarvittavat työkalut (eivät sisälly toimitukseen):

  • Säädettävä jakoavain
  • Ruuvimeisseli
  • Tiivisteteippi (PTFE-teippi)
  • Ämpäri tai pyyhe vesiroiskeille

Asennusvaiheet:

  1. Valmistelu: Turn off the main water supply to prevent leaks. Clear the area under the sink.
  2. Remove Old Tap (if applicable): Disconnect water lines and remove the mounting hardware of the existing tap.
  3. Mounting the Tap: Insert the flexible connection hoses into the tap body. Place the tap into the single mounting hole on the countertop.
  4. Kiinnitä hana: From underneath the sink, slide the rubber gasket, metal washer, and mounting nut onto the threaded rod. Tighten the nut securely to hold the tap in place.
  5. Yhdistä vesijohdot: Connect the flexible hoses to the hot and cold water supply lines. Use sealant tape on the threads to ensure a watertight seal. The tap is suitable for instantaneous water heaters but not for low-pressure systems or small storage heaters.
  6. Testi vuotojen varalta: Slowly turn on the main water supply and check all connections for leaks. Operate the tap to ensure proper water flow and temperature control.
Sivu view of EISL Speed NI182SCR Tap installed on a sink

Figure 3.1: The tap installed on a sink, showing its profile.

4. Käyttöohjeet

The EISL Speed NI182SCR tap features a single lever for controlling both water flow and temperature.

Veden virtauksen ohjaus:

  • Lift the lever upwards to increase water flow.
  • Push the lever downwards to decrease or stop water flow.

Lämpötilan säätö:

  • Move the lever to the left for hot water.
  • Move the lever to the right for cold water.
  • Adjust the lever position between left and right to achieve the desired water temperature.

Suuttimen kierto:

The tap's spout can be rotated 360 degrees, allowing for flexible use across different sink compartments or for moving the spout out of the way when not in use.

EISL Speed NI182SCR Tap showing 360-degree rotation

Figure 4.1: The tap's spout demonstrating its 360-degree rotation capability.

EISL Speed NI182SCR Tap with water flowing

Figure 4.2: The tap in operation, showing a steady water stream.

5. Huolto

Regular cleaning and maintenance will ensure the longevity and optimal performance of your tap.

Hanan puhdistus:

  • Puhdista kromipinta säännöllisesti pehmeällä liinalla ja miedolla saippualla tai hankaamattomalla puhdistusaineella, joka on erityisesti suunniteltu kromipinnoille.
  • Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the chrome finish.
  • Huuhtele huolellisesti puhtaalla vedellä puhdistuksen jälkeen ja kuivaa pehmeällä liinalla vesitahrojen välttämiseksi.

Ilmastointilaitteen huolto:

Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris. This helps maintain consistent water flow.

Keraaminen kasetti:

The ceramic cartridge is designed for long-lasting, drip-free performance. If leaks occur from the handle or the tap drips, the cartridge may need to be replaced. Consult a qualified plumber for cartridge replacement.

6. Vianmääritys

Yleisiä ongelmia ja niiden ratkaisuja on seuraavassa taulukossa.

OngelmaMahdollinen syyRatkaisu
Alhainen veden virtausClogged aerator; partially closed stopcock; low water pressureClean aerator; ensure stopcocks are fully open; check household water pressure
Vuoto nokastaWorn ceramic cartridgeReplace ceramic cartridge (professional assistance recommended)
Leaking from base of tapLoose mounting nut; worn O-ringsTighten mounting nut; replace O-rings (professional assistance recommended)
Veden lämpötila epätasainenFaulty ceramic cartridge; issues with water heaterReplace ceramic cartridge; consult water heater manual or professional

7. Tekniset tiedot

OminaisuusYksityiskohta
MallinumeroNI182SCR
MerkkiEISL
Tuotteen mitat25 x 4.5 x 15 cm
Tuotteen paino840 grammaa
VäriKromi
MateriaaliMetalli (kahvan materiaali: messinki)
ViimeistelytyyppiKromi
AsennustyyppiCountertop Mount, Single Hole
Kahvojen lukumäärä1 (vipukahva)
Venttiilin tyyppiCartridge Valve (Ceramic)
Erikoisominaisuudet360 Degree Rotation, Swivel Faucet Design
Suositellut käyttötavatKeittiö
Hanan korkeus120 mm
Faucet Reach210 mm
Letkun pituus400 mm
Dimensions diagram for EISL Speed NI182SCR Tap

Figure 7.1: Dimensional drawing of the EISL Speed NI182SCR tap.

8. Takuutiedot

Specific warranty details are not provided in the product data. Please refer to the manufacturer's official website or contact their customer service for information regarding warranty coverage and terms.

9. Tukea

For further assistance, technical support, or to inquire about replacement parts, please contact EISL customer service. Contact information can typically be found on the product packaging or the official EISL websivusto.

© 2023 EISL. Kaikki oikeudet pidätetään.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.