ANSMANN HD70B LED-otsalamppuamp Käyttöopas

1. Johdanto

Thank you for choosing the ANSMANN HD70B LED Headlamp. This manual provides essential information for the safe and efficient use of your headlampLue se huolellisesti ennen käyttöä ja säilytä se myöhempää tarvetta varten.

The ANSMANN HD70B is a versatile and lightweight lighting solution, designed for various activities such as camping, emergencies, work, reading, boating, sports, and cycling. Its robust, splash-proof (IP44) casing ensures durability in diverse environments. Constructed from durable ABS plastic, the headlamp weighs only 66g (including battery), providing optimal comfort for extended wear. The adjustable elastic headband ensures a secure and comfortable fit for both children and adults. The lamp's tilt angle can be adjusted up to 45° for precise illumination.

Paketin sisältö:

• 1 x ANSMANN HD70B LED Headlamp (Malli 1600-0260)
• 1 x AA-mignon-paristo
• 1 x Käyttöohje

2. Turvallisuusohjeet

• Älä katso suoraan LED-valonsäteeseen.
• Pidä poissa lasten ulottuvilta.
• Älä sekoita vanhoja ja uusia paristoja tai erityyppisiä paristoja.
• Poista paristot, jos pääamp ei käytetä pitkään vuotojen estämiseksi.
• Hävitä paristot paikallisten määräysten mukaisesti.
• Pääamp is IP44 splash-proof; do not immerse it in water.

3. Asennus

3.1 Akun asennus

1. Paikanna paristolokero päälaitteen takaosasta.amp yksikkö.
2. Carefully open the battery compartment cover. This typically involves sliding a latch or gently prying open a tab. If you encounter resistance, ensure no screws are present and apply gentle, even pressure.
3. Insert one AA Mignon battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Sulje paristolokeron kansi tiiviisti, kunnes se napsahtaa paikalleen.

Figure 1: The ANSMANN HD70B LED Headlamp. The battery compartment is located on the rear of the main light unit.

3.2 Pääpannan säätäminen

The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit.

3.3 Kallistuskulman säätö

Pääamp unit can be tilted up to 45° to direct the light beam precisely where needed. Gently push or pull the light unit to adjust its angle.

Kuva 2: Pääamp features a 45° swivel joint for adjustable light direction.

4. Käyttö

Pääamp is operated via a single button located on the top of the unit.

4.1 Powering On/Off and Switching Modes

• Ensimmäinen painallus: Activates the Main LED at 100% power (65 lumens). This mode provides a strong, long-range beam.
• Toinen painallus: Switches to Main LED at 25% power (16 lumens). This mode offers extended battery life with sufficient illumination for close-range tasks.
• Kolmas painos: Activates the Auxiliary LEDs (12 lumens). This mode provides a wider, softer light for peripheral vision and close-up work.
• Neljäs painos: Kääntää päätäamp POIS.

Pääamp is also dimmable, allowing for fine-tuning of light output within each mode by holding the button (specific dimming instructions may vary slightly; refer to practical use).

Kuva 3: Pääamp is IP44 splash-proof and features a powerful LED.

5. Huolto

5.1 Puhdistus

Pyyhi pääamp pehmeällä, damp liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia. Varmista, että paristolokero on kuiva ennen sulkemista.

5.2 Pariston vaihto

When the light output becomes dim or the headlamp stops functioning, replace the AA battery following the instructions in Section 3.1. Always use a fresh, high-quality AA battery.

5.3 Varastointi

Säilytä pääamp in a cool, dry place. If storing for an extended period, remove the battery to prevent potential leakage and damage to the device.

6. Vianmääritys

• Headlamp ei käynnisty:
  • Tarkista, että paristo on asetettu oikein päin ja oikea napaisuus on oikea.
  • Ensure the battery compartment cover is fully closed.
  • Vaihda paristo uuteen.
• Difficulty opening the battery compartment:
  • Ensure you are not forcing it. Look for a small latch or a designated sliding area. Some compartments require a firm but gentle slide or a slight prying motion with a fingernail or small, flat tool at a specific point. Refer to any diagrams on the product packaging if available.
• Himmeä valoteho:
  • The battery may be low. Replace it with a fresh AA battery.
  • Varmista pääamp is not in a lower power mode (e.g., Main LED 25% or Auxiliary LEDs). Cycle through the modes to check.

7. Tekniset tiedot

8. Takuu ja tuki

ANSMANN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official ANSMANN websivusto. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.