Fluance RT85 -levysoittimen käyttöohje

Johdanto

The Fluance RT85 Turntable is designed to deliver a pure analog listening experience with exceptional musical accuracy. Featuring an Ortofon 2M Blue elliptical cartridge, a high-density acrylic platter, and precise speed control, this turntable ensures high-fidelity audio reproduction. Its high-mass MDF wood plinth and vibration isolation feet provide superior stability and sound clarity.

Image: Fluance RT85 Turntable in Piano Black, showcasing its elegant design and high-quality components.

Mitä sisältyy

Your Fluance RT85 Turntable package includes the following components:

• Plinth (Turntable Base)
• Acrylic Platter
• Kumihihna
• Headshell & Ortofon 2M Blue Cartridge
• Dust Cover & 2 Hinges
• 3ft Ground Cable
• 3ft RCA Cables
• Cotton Gloves (for handling components)
• Moottorin hihnapyörän kansi
• 45 sovitin
• Vastapaino
• Kuplataso
• 5ft Power Adapter
• Käyttöopas (tämä asiakirja)

Image: A visual representation of all items included in the Fluance RT85 Turntable package.

Asennus

Follow these steps to set up your Fluance RT85 Turntable for optimal performance.

1. Laatikon purkaminen ja alkusijoitus

Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and vibrations.

2. Levylautasen ja hihnan asennus

1. Place the acrylic platter onto the spindle in the center of the turntable.
2. Place the motor pulley cap over the motor pulley. Ensure it locks into place.
3. Lift the rubber belt, which is pre-installed around the platter, and carefully place it around the motor pulley.
4. Rotate the platter a few times clockwise to ensure the belt is properly seated.

Kuva: Ylhäältä alas view of the Fluance RT85 turntable with the acrylic platter and drive belt in place.

3. Counterweight and Headshell Installation

1. Ensure the tonearm is locked in its rest.
2. Slide the counterweight onto the end of the tonearm with the numbers facing forward.
3. Install the headshell (with the Ortofon 2M Blue Cartridge pre-attached) onto the tonearm and tighten the locking nut until it is secure.

Kuva: Yksityiskohtainen view of the Ortofon 2M Blue elliptical cartridge, highlighting its precision.

4. Leveling the Turntable

Use the included bubble level to ensure the turntable is perfectly level. Adjust the turntable's adjustable feet as needed until the bubble is centered.

Image: The high-mass MDF wood plinth and adjustable sound isolation feet of the Fluance RT85.

5. Balancing the Tonearm and Setting Tracking Force

1. Irrota kynän suojus.
2. Unlock the tonearm, lift the cueing lever, and position the tonearm over the platter.
3. Hold the headshell and gently lower the cueing lever completely. Do not let the stylus touch the platter.
4. Turn the counterweight until the tonearm is balanced and floats horizontally when released.
5. Move only the counterweight indicator ring to zero (without turning the entire counterweight).
6. Rotate the entire counterweight until the ring is set to the recommended tracking force for the Ortofon 2M Blue cartridge, which is 1.8 grammaa.
7. Adjust the anti-skating dial to the same number as the tracking force (1.8).

6. Pölysuojuksen asennus

Attach the hinges to the dust cover, then carefully install the dust cover onto the turntable.

7. Yhdistäminen Amplifier/vastaanotin

The Fluance RT85 does not have a built-in phono preamp. You will need an external phono preamp tai an amplifier/receiver with a dedicated phono input.

• Connect the RCA cables from the turntable's audio output to the phono input on your receiver/preamp.
• Connect the ground wire from the turntable to the grounding post on your receiver/preamp to minimize hum.

For a visual guide on setup, please watch the official Fluance setup video:

Käyttöohjeet

Once your turntable is set up, follow these steps to play your vinyl records.

1. Place a record on the acrylic platter.
2. Select the desired speed (33 1/3 RPM or 45 RPM) using the speed selector knob. For 45 RPM records, place the 45 adapter on the spindle if the record has a large center hole.
3. Nosta äänivartta varovasti äänivarren säätövivulla.
4. Aseta äänivarsi levyn halutun aloitusuran päälle.
5. Slowly lower the cueing lever to allow the stylus to gently descend onto the record.
6. At the end of the record, the auto-stop feature will stop the platter rotation. Lift the tonearm and return it to its rest.

Ylimääräiseksiview of the Fluance Reference Series turntables, watch this video:

Huolto

Oikea huolto varmistaa levysoittimesi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Pölysuoja: Keep the dust cover closed when not in use to protect the turntable from dust and debris. Clean with a soft, dry cloth.
• Kynä: Puhdista osoitinkynä varovasti säännöllisesti pehmeällä harjalla, joka on suunniteltu osoitinkynän puhdistukseen, harjaten takaa eteenpäin.
• Platter and Plinth: Wipe the acrylic platter and MDF wood plinth with a soft, lint-free cloth. Avoid abrasive cleaners.
• Vyö: Inspect the drive belt periodically for wear or stretching. Replace if necessary.

Vianetsintä

Jos kohtaat ongelmia, katso seuraavia yleisiä vianmääritysvinkkejä:

Tekniset tiedot

• Malli: RT85T
• Merkki: Fluance
• Tuotteen mitat: 13.75 x 16.5 x 5.5 tuumaa
• Tuotteen paino: 16.76 kiloa
• Materiaali: MDF-puu
• Vati: High Density Acrylic
• Kasetti: Ortofon 2M Blue elliptical cartridge
• Moottorityyppi: AC Motor with Speed Control Mechanism
• Wow/Flutter: 0.07 %
• Yhteystekniikka: Langallinen
• Alkuperämaa: Taiwan

Image: Key dimensions of the Fluance RT85 Turntable.

Takuu ja tuki

Fluance offers a 2-year manufacturer's direct warranty and lifetime customer support for your RT85 Turntable.

For additional support, FAQs, and international manuals, please visit the official Fluance support page:

Fluance Support Page

Image: QR code and text indicating support resources for Fluance products.