Johdanto
This manual provides essential information for the safe and effective operation of your VOLTCRAFT IR 2201-50D USB Infrared Thermometer. Please read these instructions thoroughly before using the device and retain them for future reference. This device is designed for non-contact temperature measurement across a wide range, featuring a dual laser for precise targeting and a USB interface for data transfer.
Turvallisuusohjeet
- Laserturvallisuus: Do not look directly into the laser beam or point it at people or animals. The laser is used for targeting only.
- Silmien suojaus: Always wear appropriate eye protection when operating the device in environments where laser exposure is a concern.
- Lämpötilarajat: Älä altista laitetta äärimmäisille lämpötiloille sen käyttöalueen ulkopuolella.
- Akun käsittely: Ensure correct battery polarity. Remove batteries if the device will not be used for an extended period. Dispose of batteries according to local regulations.
- Huolto: Suorita huolto vain tässä käyttöohjeessa kuvatulla tavalla. Anna kaikki muut huoltotoimenpiteet pätevän henkilöstön tehtäväksi.
- Ympäristöolosuhteet: Avoid using the device in high humidity, dusty, or explosive environments.
Pakkauksen sisältö
Verify that all items listed below are present and in good condition upon unpacking.
Image: Complete kit for the VOLTCRAFT IR 2201-50D Infrared Thermometer.
- VOLTCRAFT IR 2201-50D Infrared Thermometer
- Kova kantolaukku
- Mini kolmijalka
- USB-liitäntäkaapeli
- K-Type Temperature Probe
- Ohjelmisto-CD
- Käyttöopas (tämä asiakirja)
Tuote loppuview
The VOLTCRAFT IR 2201-50D is a high-precision infrared thermometer designed for non-contact temperature measurements. Key features include:
- Kaksoislaserkohdistus: Provides accurate aiming for precise measurement areas.
- Laaja lämpötila-alue: Measures from -50 °C to 2200 °C (-58 °F to 3992 °F).
- High Optical Resolution (D:S): 50:1 distance-to-spot ratio for measuring small targets from a distance.
- Nopea vasteaika: 150 ms for quick readings.
- Säädettävä emissiivisyys: Range from 0.1 to 1.0, allowing for accurate measurements on various surfaces.
- USB-liitäntä: For data logging and connection to a computer (software included).
- K-Type Input: Supports external K-type thermocouples for contact temperature measurements.
Kuva: Edessä view of the thermometer, highlighting the measurement lens and laser emitters.
Kuva: Sivu view of the thermometer, showing the display and controls.
Asennus
- Akun asennus: Open the battery compartment (usually located in the handle). Insert one 9V battery, ensuring correct polarity. Close the compartment securely.
- Virta päälle: Press the trigger to power on the device. The display will illuminate.
- Yksikkövalinta: If necessary, use the 'MODE' button to cycle through settings and select your preferred temperature unit (°C or °F). Refer to the on-screen indicators.
- Emissiivisuuden säätö: For accurate readings, adjust the emissivity setting (E) to match the surface being measured. Consult a standard emissivity table for common materials. Use the up/down arrow buttons to change the value.
- K-Type Probe Connection (Optional): If using the K-type probe, insert its connector into the designated K-type input port on the side of the thermometer.
- USB-liitäntä (valinnainen): To connect to a computer for data logging, use the provided USB cable. Install the software from the included CD before connecting the device.
Käyttöohjeet
- Kontaktiton mittaus:
- Suuntaa lämpömittari kohdepintaan.
- Paina liipaisinta ja pidä sitä painettuna. Kaksoislaserit osoittavat mittausalueen.
- The temperature reading will appear on the display. Release the trigger to hold the reading.
- Maintain the specified distance-to-spot ratio (50:1) for optimal accuracy. For example, at 50 inches distance, the measurement spot diameter is 1 inch.
- K-Type Probe Measurement:
- Ensure the K-type probe is securely connected.
- Select the K-type measurement mode using the 'MODE' button.
- Place the tip of the K-type probe in contact with the surface or substance to be measured.
- The temperature reading from the probe will be displayed.
- Data Logging (via USB):
- Connect the thermometer to your computer using the USB cable.
- Launch the installed software.
- Follow the software instructions to configure data logging parameters and start/stop recording measurements.
- Näytön toiminnot: The display may show various indicators such as MAX/MIN temperature, average temperature, differential temperature, and emissivity settings. Use the 'MODE' button to navigate these functions.
Huolto
- Puhdistus:
- Pyyhi laite casing pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Clean the infrared lens gently with a soft cloth or cotton swab and a small amount of isopropyl alcohol. Avoid scratching the lens.
- Varastointi: Store the thermometer in its hard carrying case in a cool, dry place when not in use. Remove batteries if storing for extended periods.
- Akun vaihto: Vaihda 9 V:n paristo, kun näytössä näkyy heikon pariston ilmaisin.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laite ei käynnisty. | Tyhjä tai väärin asennettu akku. | Vaihda 9 V:n paristo tai tarkista sen napaisuus. |
| Epätarkat lämpötilalukemat. | Incorrect emissivity setting; dirty lens; target too far or too small. | Adjust emissivity for the target material. Clean the lens. Ensure the target fills the measurement spot. |
| Laser ei näy. | Lasertoiminto poistettu käytöstä; akun varaus on heikko. | Check device settings to enable laser. Replace battery. |
| USB connection not recognized. | Software not installed; faulty cable; driver issue. | Install the software from the CD. Try a different USB port or cable. Consult software documentation for driver installation. |
Tekniset tiedot
| Parametri | Arvo |
|---|---|
| Mallinumero | 1599565 |
| Temperature Range (IR) | -50 °C - 2200 °C (-58 °F - 3992 °F) |
| Optical Resolution (D:S) | 50:1 |
| Vastausaika | 150 ms |
| emissiokertoimen | Säädettävä 0.1–1.0 |
| Laser tyyppi | Kaksoislaser |
| Yhteydet | USB |
| Virtalähde | 9 V:n paristo (ei sisälly toimitukseen) |
| Mitat (P x L x K) | 15.5 x 5.2 x 20.4 cm (6.1 x 2.0 x 8.0 tuumaa) |
| Paino | 320 grammaa (0.7 lbs) |
| Materiaali | Muovi |
Takuu ja tuki
VOLTCRAFT products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official VOLTCRAFT website. Please have your model number (IR 2201-50D) and serial number (if applicable) ready when contacting support.
Valmistaja: VOLTCRAFT
Hoito-ohjeet: Clean the device as described in the Maintenance section.