QSC CP8-NA

QSC CP8 8-Inch Compact Powered Loudspeaker Instruction Manual

Brand: QSC | Model: CP8-NA

1. Johdanto

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument amplifiointi.

2. Tärkeimmät ominaisuudet

  • Compact and powerful performance; Light weight and highly portable.
  • 1000 Watt peak power Class-D amplifier -moduuli.
  • Easily selected contours for commonly-used applications.
  • Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
  • Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
  • Professional appearance looks great in any application.
  • Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. Asennus

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

Edessä view of the QSC CP8 loudspeaker

Kuva 1: Etuosa view of the QSC CP8 loudspeaker, showcasinsen kompaktin rakenteen ja suojaritilän ansiosta.

Rear panel of the QSC CP8 loudspeaker showing inputs and controls

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 Virran kytkeminen

  1. Varmista, että takapaneelin virtakytkin on 'OFF'-asennossa.
  2. Connect the provided power cord to the AC inlet on the rear panel.
  3. Liitä virtajohdon toinen pää sopivaan vaihtovirtapistorasiaan.

3.2 Ääniliitännät

  1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
  2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. Käyttöohjeet

4.1 Virran kytkeminen päälle/pois

  1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
  2. Sammuta virta kääntämällä virtakytkin asentoon 'OFF'.

4.2 Adjusting Volume and Gain

  • Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
  • The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

  • OLETUS: Yleiskäyttöinen asetus.
  • TANSSI: Enhanced bass response for music playback.
  • EXT SUB: Optimized for use with an external subwoofer.
  • LATTIAN MONITORI: Reduces low-frequency build-up for stage seuranta.
  • PUHE: Parantaa äänen selkeyttä.

Select the appropriate contour using the switch on the rear panel.

4.4 Bluetooth-yhteys

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. Huolto

  • Puhdistus: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
  • Varastointi: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Käsittely: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6. Vianmääritys

  • Ei ääntä: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
  • Vääristynyt ääni: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
  • Virtaongelmat: Varmista, että virtajohto on liitetty kunnolla ja pistorasia toimii.

7. Tekniset tiedot

OminaisuusYksityiskohta
AsennustyyppiLattialle asennettava, seinäkiinnitys
MateriaaliMuovi
Mallin nimiCP8-NA
Kaiuttimen tyyppiMonitor
ErikoisominaisuusKannettava
Suositellut käyttötavatFor main PA, stage monitor, instrument amplification, and portable PA systems
Yhteensopivat laitteetKannettava tietokone, MP3-soitin, älypuhelin, tabletti
Yksikkömäärä1.0 Count
VäriMusta
Tuotteen mitat14" S x 20" L x 14" K
Tuotteen paino10 puntaa
ValvontamenetelmäKosketa
Langaton viestintäBluetooth
Kaiuttimen koko8 tuumaa
VirtalähdeJohdollinen sähkö
Bassokaiuttimen halkaisija20.32 senttimetriä
Diskantin halkaisija1 tuumaa
Kaiutin AmpLifaatiotyyppiAktiivinen
Wattage1000 wattia
Taajuusvaste20 kHz
YhteystekniikkaYlimääräinen

8. Mitä laatikossa on

  • QSC CP8 8-Inch Compact Powered Loudspeaker
  • Käyttöopas
  • Virtajohto

9. Takuu ja tuki

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC websivustolla tai ota yhteyttä asiakaspalveluun.

For additional resources and product information, please visit the QSC Store on Amazon.