RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT) Instruction Manual

Johdanto

Thank you for choosing the RYOBI 18-Volt ONE+ Hybrid Portable Fan. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your fan. Please read it thoroughly before use and retain it for future reference.

Turvallisuustiedot

VAROITUS: To reduce the risk of injury, always follow basic safety precautions when using this product.

• Pidä poissa lasten ulottuvilta. Tämä tuote ei ole lelu.
• Älä käytä tuuletinta, jos sen johto tai pistoke on vaurioitunut.
• Avoid placing fingers or other objects through the fan guard.
• Ensure the fan is placed on a stable, level surface during operation.
• Katkaise virta ennen puhdistusta tai huoltoa.

Pakkauksen sisältö

Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:

• RYOBI 18-Volt ONE+ Hybrid Portable Fan (Model PCL811KIT)
• 18-Volt Lithium-Ion Battery (P163, 2.00Ah)
• Akkulaturi

Note: An extension cord is sold separately and is required for AC power operation. This fan is not a misting fan.

Asennus

1. Akun asennus

1. Varmista, että tuuletin on sammutettu.
2. Locate the battery port on the base of the fan.
3. Align the 18-Volt Lithium-Ion Battery with the battery port and slide it in until it clicks securely into place.
4. To remove the battery, press the release latches on the sides of the battery and slide it out.

2. AC Power Connection (Hybrid Operation)

1. Varmista, että tuuletin on sammutettu.
2. Locate the AC power port on the fan.
3. Insert a compatible extension cord (sold separately) into the AC power port.
4. Plug the other end of the extension cord into a standard 120V AC outlet.
5. The fan will automatically switch to AC power when connected, conserving battery life.

Image: The RYOBI 18-Volt ONE+ Hybrid Portable Fan, showing its main components including the fan unit, battery, and charger.

Käyttöohjeet

1. Virran kytkentä/katkaisu ja nopeuden säätö

1. To turn the fan on, rotate the variable speed dial located on the front base of the fan clockwise.
2. Continue rotating the dial clockwise to increase the fan speed. The fan offers variable speeds up to 2100 RPM.
3. To decrease the fan speed, rotate the dial counter-clockwise.
4. To turn the fan off, rotate the dial fully counter-clockwise until it clicks into the OFF position.

2. Adjusting Fan Head Angle

The fan head can be manually tilted to direct airflow as needed. Gently grasp the fan housing and adjust it to the desired angle. The fan head will hold its position once set.

Huolto

Säännöllinen huolto varmistaa tuulettimen optimaalisen suorituskyvyn ja pidentää sen käyttöikää.

• Puhdistus: Disconnect the fan from all power sources (battery and AC cord) before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not immerse the fan in water or use abrasive cleaners.
• Varastointi: When not in use, store the fan in a clean, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Akun hoito: Always use the RYOBI-approved charger for the 18-Volt Lithium-Ion Battery. Do not expose batteries to water or extreme heat.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

This RYOBI product comes with a 30 päivän rajoitettu takuu from the manufacturer. For warranty claims, technical assistance, or to purchase replacement parts, please refer to the official RYOBI websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa.

Säilytä ostokuittisi takuun voimassaoloa varten.