Nedis WIFIWC10WT

Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT) User Manual

For Electric Curtains, Roller Blinds, and Awnings

1. Johdanto

Thank you for choosing the Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT). This device allows you to control your electric curtains, roller blinds, or awnings conveniently via a physical wall switch, the Nedis SmartLife application, or voice commands. This manual provides essential information for safe installation, operation, and maintenance of your device.

Edessä view of the Nedis SmartLife Wi-Fi Wall Switch with three control buttons and SmartLife logo.

Kuva 1.1: Edessä view of the Nedis SmartLife Wi-Fi Wall Switch. This switch features three touch-sensitive buttons for control and integrates with the SmartLife ecosystem.

2. Asennus ja asennus

2.1 Turvaohjeet

  • Ensure the main power supply is switched off before installation to prevent electric shock.
  • Asennuksen saa suorittaa pätevä sähköasentaja tai se on tehtävä paikallisten sähkömääräysten mukaisesti.
  • Älä ylitä 300 W:n enimmäiskuormituskapasiteettia.

2.2 Kytkentäkaavio

Connect the wires to the terminals on the back of the switch as shown in the diagram below. Ensure all connections are secure.

Takaisin view of the Nedis SmartLife Wi-Fi Wall Switch showing wiring terminals labeled L, N, L1, L2, L3.

Kuva 2.1: Takaosa view of the wall switch, displaying the connection terminals. 'L' is for Live, 'N' for Neutral, and 'L1', 'L2', 'L3' are for motor control (Up, Down, Stop/Common).

  • L: Live wire (Phase)
  • N: Nollajohdin
  • L1: Motor Up (e.g., curtain open, blind up, awning out)
  • L2: Motor Down (e.g., curtain close, blind down, awning in)
  • L3: Common or Stop (refer to your motor's wiring for specific connection)

2.3 Sovelluksen asennus ja Wi-Fi-yhteys

  1. Lataa Nedis SmartLife sovellus älypuhelimesi sovelluskaupasta (iOS tai Android).
  2. Rekisteröidy tai kirjaudu sisään Nedis SmartLife -tilillesi.
  3. Power on the wall switch. The Wi-Fi indicator light should start blinking rapidly. If not, press and hold the middle button for 5-10 seconds until it blinks.
  4. In the app, tap '+' to add a new device. Select 'Curtain Switch' or similar from the device list.
  5. Follow the on-screen instructions to connect the switch to your 2.4 GHz Wi-Fi network. Note: This device only supports 2.4 GHz Wi-Fi.

2.4 Kalibrointi

After successful Wi-Fi connection, calibrate the switch to your curtain/blind/awning motor. This sets the open and closed positions.

  1. In the Nedis SmartLife app, navigate to the device settings for your wall switch.
  2. Look for a 'Calibration' or 'Travel Limit Setting' option.
  3. Follow the app's prompts to fully open and then fully close your curtain/blind/awning. The app will record the travel time for each direction.
  4. Test the open and close functions to ensure calibration is accurate. Adjust if necessary.

3. Laitteen käyttö

3.1 Manuaalinen ohjaus

The wall switch has three touch buttons:

  • Nuoli ylös -painike: Opens the curtain/blind/awning.
  • Middle Pause Button: Pysäyttää liikkeen.
  • Nuoli alas -painike: Closes the curtain/blind/awning.

3.2 Sovellusten hallinta

Use the Nedis SmartLife app for advanced control and scheduling.

Screenshot of the Nedis SmartLife app interface for controlling a sunshade, showing Open, Paused, Close buttons and a Timer option.

Image 3.1: Nedis SmartLife app interface for controlling a sunshade. The app allows for opening, pausing, closing, and setting timers for your connected device.

  • Avaa/Sulje/Tauko: Control the movement directly from the app interface.
  • Ajastin/Aikataulu: Set specific times for your curtains/blinds/awnings to open or close automatically.
  • Kohtaukset: Create custom scenes to automate actions based on conditions like time of day, weather, or other SmartLife devices.

3.3 Ääniohjaus

The switch is compatible with Amazon Alexa and Google Assistant. Link your Nedis SmartLife account to your voice assistant app and use commands such as:

  • "Alexa, open the living room blinds."
  • "Hei Google, sulje makuuhuoneen verhot."
  • "Alexa, stop the awning."

4. Huolto

The Nedis SmartLife Wi-Fi Wall Switch requires minimal maintenance.

  • Puhdista pinta pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
  • Varmista, ettei laitteen sisään pääse nesteitä.
  • Regularly check for any loose wiring connections, especially after initial installation.

5. Vianmääritys

If you encounter issues with your Nedis SmartLife Wi-Fi Wall Switch, refer to the following common solutions:

  • Laite ei muodosta yhteyttä Wi-Fi-verkkoon:
    • Varmista, että Wi-Fi-verkkosi on 2.4 GHz:n taajuudella. Kytkin ei tue 5 GHz:n verkkoja.
    • Check if the Wi-Fi indicator light is blinking rapidly. If not, press and hold the middle button for 5-10 seconds to enter pairing mode.
    • Verify your Wi-Fi password and network stability.
    • Move the switch closer to your Wi-Fi router during setup.
  • Calibration issues (stops at wrong point):
    • Repeat the calibration process in the Nedis SmartLife app. Ensure the curtain/blind/awning moves fully to its open and closed positions during calibration.
    • Tarkista, onko fyysisiä esteitä, jotka estävät täyden liikkumisen.
    • Ensure your motor has working end-switches if applicable, as the switch relies on these for accurate positioning.
  • Laite ei vastaa:
    • Check the power supply to the switch.
    • Verify your Wi-Fi connection. If the Wi-Fi is down, app control will not work, but manual control should still function.
    • Restart the device by turning off the main power for a few seconds and then turning it back on.
    • If the issue persists, consider resetting the device to factory settings (refer to app for specific instructions, usually involves holding a button for an extended period) and re-pairing.
  • Unexpected behavior (e.g., uncontrolled movement, high-pitched noise):
    • Immediately disconnect power to the device.
    • This may indicate a hardware fault. Do not attempt to repair it yourself. Contact customer support.

6. Tuotteen tekniset tiedot

MerkkiNedis
MallinumeroWIFIWC10WT
Tuotteen mitat (P x L x K)8.6 x 3.5 x 8.6 cm
Paino180 g
VäriMusta
ToimintatilaON-OFF
Nykyinen luokitus6 Ampere
Wattage300 wattia
Kytkimen tyyppiPainike
AsennustyyppiSeinäteline
YhteysprotokollaWi-Fi (2.4 GHz)
Ohjaimen tyyppiAmazon Alexa, Google Assistant
Yhteensopivat laitteetNedis SmartLife
IP-luokitusIP65
VaatimustenmukaisuusIP65, IEC 60669-2-1:2002

7. Takuutiedot

This Nedis SmartLife Wi-Fi Wall Switch (WIFIWC10WT) comes with a 1-year limited warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, unauthorized modifications, accidents, or improper installation.

Säilytä ostokuitti takuuvaatimuksia varten.

8. Asiakastuki

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Nedis websivustolla tai ota yhteyttä asiakaspalveluun.

  • Nedis Websivusto: www.nedis.com
  • Katso websivusto, josta löydät alueesi yhteystiedot.

© 2024 Nedis. Kaikki oikeudet pidätetään. Tämän käyttöoppaan tiedot voivat muuttua ilman erillistä ilmoitusta.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.