1. Johdanto
The Godox AD400Pro TTL Studio Flash is a versatile and powerful outdoor flash unit designed for professional photographers. It integrates a built-in 2.4G wireless X system, high-speed sync (HSS), and a robust lithium battery, offering portability and consistent performance for various shooting environments. This manual provides detailed instructions for the safe and effective use of your AD400Pro flash.
Keskeisiä ominaisuuksia ovat:
- 400Ws high power output with stable color temperature.
- Built-in Godox 2.4G wireless X system for comprehensive compatibility with Canon E-TTL II, Nikon i-TTL, Sony, FUJIFILM, Olympus, and Panasonic TTL autoflash systems.
- High-Speed Sync up to 1/8000s.
- Fast recycle time of 0.01-1 seconds.
- Powerful 21.6V/2600mAh lithium battery providing approximately 390 full power flashes.
- 30W LED mallinnus lamp.
- Bowens mount compatibility for a wide range of accessories.
2. Turvaohjeet
Please read and understand all safety instructions before using this product to prevent injury to yourself or others and damage to the product.
- Do not disassemble or modify this product. If the product fails, it must be repaired by an authorized maintenance center.
- Pidä tämä tuote kuivana. Älä käsittele sitä märillä käsillä äläkä upota sitä veteen.
- Do not use the flash unit in the presence of flammable gases, chemicals, or other materials. In certain circumstances, these materials might be sensitive to the strong light emitted from this flash unit, and fire or electromagnetic interference may result.
- Do not leave or store the flash unit in environments with high temperatures, such as in a vehicle on a hot day.
- Älä laukaise salamaa suoraan silmiin (etenkään vauvojen silmiin) lyhyen matkan päässä. Muuten voi ilmetä näkövammaisuutta.
- Käytä ainoastaan määritettyä akkua ja laturia.
- Ensure the product is securely mounted when in use to prevent accidental drops.
- Irrota virtajohto, kun et käytä tai ennen puhdistusta.
3. Mitä laatikossa on
Varmista, että pakkauksessasi on kaikki tarvittavat osat:
- 1 * Godox AD400Pro Flash Unit
- 1 * Kantolaukku
- 1 * Flash Tube
- 1 * Lithium Battery (21.6V/2600mAh)
- 1 * Akkulaturi
- 1 * Virtajohto
- 1 * Standard Reflector
- 1 * Käyttöopas
- 1 * Bowens-Mount Adapter Ring
4. Tuote ohiview
Familiarize yourself with the components and controls of your AD400Pro flash unit.
Figure 4.1: AD400Pro Flash Unit with Labeled Components
Tärkeimmät komponentit:
- Salamaputki: The light-emitting element.
- Mallinnus Lamp: A continuous LED light for previewvalaistustehosteiden luominen.
- LCD-näyttö: Shows current settings, modes, and battery status.
- Ohjauspaneeli: Painikkeet ja valitsin asetusten säätämiseen.
- Akkulokero: Houses the lithium battery.
- Kiinnike: For attaching the flash to a light stand.
- Bowens Mount: Standard mount for attaching light modifiers.
- USB Type-C -portti: Laiteohjelmistopäivityksiä varten.
- 3.5 mm:n synkronointijohtoliitäntä: For wired triggering.
Ohjauspainikkeet:
- Virtakytkin: Kytkee laitteen päälle/pois päältä.
- Tilan valintapainike: Vaihtaa salamatilojen välillä (TTL, käsisäätö, monisalama).
- Langattoman verkon valintapainike: Activates/deactivates wireless function.
- Group/Channel Button: Sets wireless groups and channels.
- Valitse numero: Navigoi valikoissa ja säätää arvoja.
- Aseta-painike: Vahvistaa valinnat.
- Valikkopainike: Avaa järjestelmäasetukset.
- Testipainike: Laukaisee testisalaman.
- Mallinnus Lamp Painike: Ohjaa mallinnusta lamp.
- High Speed Sync Button: Activates HSS mode.
5. Asennus
5.1 Attaching the Flash Tube
- Align the pins on the flash tube with the sockets on the flash head.
- Gently push the flash tube into place until it clicks securely.
Figure 5.1: Flash Tube Installation
5.2 Akun asettaminen paikalleen
- Avaa paristolokeron kansi.
- Insert the lithium battery, ensuring the contacts align correctly.
- Close the battery compartment cover until it locks.
Figure 5.2: Lithium Battery
5.3 Mounting to a Light Stand
- Loosen the bracket locking ring on the flash unit's mounting bracket.
- Slide the mounting bracket onto the light stand stud.
- Tighten the bracket locking ring to secure the flash unit.
5.4 Valonmuokkainten kiinnittäminen
The AD400Pro features a Bowens mount for attaching various light modifiers.
- Align the modifier's mounting tabs with the slots on the Bowens mount adapter ring.
- Aseta muokkaaja paikalleen ja kierrä sitä myötäpäivään, kunnes se lukittuu paikalleen.
- To remove, press the release button on the adapter ring and rotate counter-clockwise.
Figure 5.3: AD400Pro with Reflector
6. Käyttöohjeet
6.1 Virta päälle/pois
Press the Power Switch to turn the flash unit on or off.
6.2 salamatilaa
Press the Mode Selection Button to cycle through the available flash modes:
- TTL (Through-The-Lins) -tila: The flash output is automatically adjusted by the camera's metering system.
- Manuaalitila (M): Allows manual control over flash power output (e.g., 1/1 to 1/256).
- Monitila (stroboskooppinen): Fires a series of rapid flashes during a single exposure to capture multiple images of a moving subject.
Figure 6.1: TTL Auto Exposure in use
6.3 Langattoman X-järjestelmän käyttö
The AD400Pro features a built-in 2.4G wireless X system for remote control and triggering.
- Isäntä/orja-toiminto: The AD400Pro can act as a master or slave unit. When used as a slave, it can be triggered by Godox TTL camera flashes or other Godox outdoor TTL flashes.
- Yhteensopivuus: Compatible with Godox X1T, X2T, XPro, and XProII series triggers (sold separately) for Canon, Nikon, Sony, Fuji, Panasonic, Olympus, and Pentax systems.
- Setting Groups and Channels: Use the Group/Channel button and Select Dial to set the desired group and channel for wireless communication. Ensure your trigger and flash are set to the same group and channel.
Figure 6.2: Godox 2.4G Wireless System Compatibility
6.4 Nopea synkronointi (HSS)
Press the HSS button to activate High-Speed Sync mode, allowing you to shoot at shutter speeds up to 1/8000s. This is useful for freezing fast motion or overpowering ambient light.
Figure 6.3: High-Speed Continuous Shooting
6.5 Salamavalon korjaus (FEC)
In TTL mode, you can adjust the flash exposure compensation from -3 to +3 in 1/3rd stop increments using the Select Dial. This allows for fine-tuning of flash output based on environmental conditions or creative intent.
6.6 Mallintaminen Lamp
Paina Mallinnus Lamp Button to turn the 30W LED modeling lamp on or off. The modeling lamp helps visualize the light's effect on your subject before firing the flash.
6.7 Virtalähteen vaihtoehdot
The AD400Pro can be powered by its included lithium battery or an optional AC adapter (Godox AD-AC, sold separately) for continuous studio use.
Figure 6.4: Dual Power Methods (Battery and AC Adapter)
7. Huolto
7.1 Puhdistus
Clean the flash unit regularly with a soft, dry cloth. Do not use solvents or abrasive cleaners. For the flash tube, use a clean, lint-free cloth to gently wipe away any dust or fingerprints.
7.2 Akun hoito
- It is recommended to recharge the battery at regular intervals, even if not fully discharged. Do not wait for the battery to be completely depleted before recharging.
- If the battery cannot be recharged due to prolonged inactivity, press the button on the right side of the indicator several times to activate the battery.
- Säilytä akkua viileässä, kuivassa paikassa suojassa suoralta auringonvalolta ja äärimmäisiltä lämpötiloilta.
7.3 Varastointi
When not in use for extended periods, remove the battery from the flash unit and store both in a protective case in a cool, dry environment.
8. Vianmääritys
If you encounter issues with your AD400Pro flash, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Salama ei välähdä. | Low battery; incorrect wireless settings; flash not powered on; camera not triggering. | Charge the battery; check wireless channel/group; ensure flash is on; check camera flash settings and trigger connection. |
| Akku ei lataudu. | Charger not connected; battery deeply discharged; faulty battery/charger. | Ensure charger is properly connected; press the battery activation button if inactive for long periods; contact support if issue persists. |
| Epätasainen salamateho. | Low battery; flash overheating; incorrect mode/settings. | Charge battery; allow flash to cool down; verify flash mode and power settings. |
| Langaton liipaisin ei toimi. | Incorrect channel/group; trigger battery low; distance too far. | Match channel/group on flash and trigger; replace trigger battery; reduce distance between trigger and flash. |
If the problem persists after attempting these solutions, please contact Godox customer support.
9. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | GODOX |
| Mallinumero | AD400Pro (LW-AD400Pro) |
| Teholähtö | 400Ws |
| Opasnumero | GN72 (m) |
| Flash-synkronointinopeus | Jopa 1/8000 sekuntia (HSS) |
| Värilämpötila | 4800K (±75K over entire power range in color temperature mode) |
| Akku | 21.6V/2600mAh litiumakku |
| Täysi teho vilkkuu | N. 390 |
| Kierrätä aika | 0.01-1 luvulla |
| Mitat (S x K) | 12.8P x 12.8H centimeters (without flash tube and reflector) |
| Paino | 2.1 kg (without flash tube and reflector) |
| Yhteensopivat kiinnikkeet | Bowens Mount (via adapter ring), ISO Mount, Sony, Fujifilm, Canon, Nikon, Screw Mount |
| Langaton tekniikka | 2.4 G RF |
| Käyttöliittymä | USB Type-C (for firmware upgrade), 3.5mm Sync Cord Jack |
| Exposure Control Type | Automaattinen |
| ISO-alue | ISO 100-6400 |
10. Takuu ja tuki
10.1 Takuutiedot
The Godox AD400Pro TTL Studio Flash comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
10.2 Asiakastuki
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your authorized Godox dealer or visit the official Godox websivusto tuen yhteystiedot.