MXR M228
MXR M228 Dyna Comp Deluxe Compressor Guitar Effect Pedal Instruction Manual
Malli: M228
Merkki: MXR
Johdanto
The MXR M228 Dyna Comp Deluxe Compressor brings enhanced control to the classic compression sound. This pedal is designed to shape and refine your guitar tone, offering both vintage and modern compression characteristics. Its circuitry is built around the CA3080 "metal can" integrated circuit, known for its quiet operation, transparency, and dynamic range.
Asennus
Tehovaatimukset
The Dyna Comp Deluxe operates on a 9V AC power adapter. Ensure the adapter is compatible with the pedal's power input. The power input jack is located on the side of the pedal.

Kuva 1: A standard 9V AC power adapter, used to power the MXR Dyna Comp Deluxe pedal.
Pedaalin kytkeminen
Liitä kitarasi INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable. Connect the OUTPUT polkimen vasemmalla puolella oleva tunkki omaan amplifier tai signaaliketjusi seuraava pedaali toisella 6,3 mm:n instrumenttikaapelilla.

Kuva 2: Sivu view of the MXR Dyna Comp Deluxe pedal, illustrating the input, output, and 9V power jacks.
Battery Installation (Optional)
To install a 9V battery, remove the four screws on the bottom plate of the pedal. Carefully lift the bottom plate to access the battery compartment. Connect a 9V battery to the clip and place it inside the compartment. Replace the bottom plate and secure the screws.

Kuva 3: Pohja view of the MXR Dyna Comp Deluxe pedal, showing the four screws that secure the battery compartment cover.
Operating the Dyna Comp Deluxe
The Dyna Comp Deluxe features several controls to fine-tune your compression. Experiment with each knob and switch to find the sound that best suits your playing style.

Kuva 4: Yläosa view of the MXR Dyna Comp Deluxe pedal, highlighting the control knobs and switches.
Säätimet:
- LÄHTÖ: Controls the overall volume level of the compressed signal.
- HERKKYYS: Adjusts the length of sustain. Higher sensitivity results in longer sustain.
- PUHDAS: Blends your unaffected (dry) signal with the compressed signal. This allows for a balanced mix, preserving some of your original tone while benefiting from compression.
- SÄVY: Refines the character of the compressed signal, allowing you to brighten or darken the effect to your preference.
- ATTACK-kytkin: Toggles between two attack times:
- Vintage (Slow Attack): Provides a more traditional, percussive compression feel.
- Modern (Fast Attack): Offers a quicker response, suitable for contemporary playing styles.
Pakkauksen ymmärtäminen:
A compressor pedal reduces the dynamic range of your guitar signal. It makes louder notes quieter and quieter notes louder, resulting in a more even and sustained sound. This can be particularly useful for balancing dynamics when switching between loud chords and softer single-note lines.
Video 1: A demonstration of the MXR Dyna Comp Deluxe Compressor M228, showcasing its clean funk tones and control over dynamics.
Video 2: Yliview of the MXR Dyna Comp Deluxe Compressor M228, demonstrating its features and sound.
Video 3: An informational video explaining the function and application of a compression pedal in general.
Huolto
- Puhdistus: Puhdista poljin pehmeällä, kuivalla liinalla. Vältä hankaavia puhdistusaineita tai liuottimia.
- Varastointi: Säilytä poljinta kuivassa paikassa, poissa äärimmäisistä lämpötiloista tai kosteudesta.
- Liitännät: Periodically check all cables and connections for wear and tear to ensure optimal performance.
Vianetsintä
- Ei ääntä:
- Tarkista kaikki kaapeliliitännät (tulo, lähtö, virta).
- Ensure the power adapter is correctly connected and functioning, or that the 9V battery is fresh and properly installed.
- Varmista, että kitarasi ja amplifier are working correctly by bypassing the pedal.
- Ei-toivottu kohina/hurina:
- Varmista, että kaikki kaapelit ovat asianmukaisesti suojattuja ja hyvässä kunnossa.
- Try using a different power supply to rule out power-related noise.
- Siirrä poljin pois muiden elektronisten laitteiden läheltä, jotka saattavat aiheuttaa häiriöitä.
- Vaikutus ei kiinnosta:
- Press the footswitch firmly to ensure it engages. The LED indicator should light up when the effect is active.
- Check the 'Clean' knob setting; if it's fully clockwise, you might be hearing mostly the dry signal.
Tekniset tiedot
| Mallinumero | M228 |
| Merkki | MXR |
| Tuotteen paino | 11.8 unssia (0.74 puntaa) |
| Tuotteen mitat | 5.5 x 4.5 x 2.5 tuumaa |
| Laitteistorajapinta | 1/4 tuuman ääni |
| Signaalin muoto | Analoginen |
| Virtalähde | Sovitin |
| Voitage | 9 volttia |
| Väri | Punainen |
Takuu ja tuki
For detailed warranty information and customer support, please refer to the official MXR websivustolta tai ota yhteyttä valtuutettuun jälleenmyyjään. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.