1. Asennus
This section guides you through the initial preparation of your Brother LS-1217 sewing machine before its first use.
1.1 Pakkauksesta purkaminen ja sijoittaminen
Carefully remove the sewing machine from its packaging. Retain all packing materials for future transport or storage. Place the machine on a stable, flat surface with adequate lighting. Ensure there is enough space around the machine for comfortable operation and fabric handling.
1.2 Virtaliitäntä
Connect the power cord to the machine's power input jack, then plug the other end into a standard electrical outlet. Ensure the power switch is in the "OFF" position before connecting. The foot controller also connects to a dedicated jack on the machine.
1.3 Neulan asennus
- Käännä käsipyörää itseesi päin nostaaksesi neulan ylimpään asentoonsa.
- Löysää neula clamp screw by turning it counter-clockwise.
- Aseta uusi neula litteä puoli koneen takaosaa kohti ja työnnä se niin pitkälle ylös kuin se menee.
- Kiristä neula clamp ruuvaa tiukasti.
1.4 Puolaus
Proper bobbin winding is crucial for even stitching.
- Aseta lankarulla lankatappiin.
- Ohjaa lanka ylemmän langanohjaimen läpi ja puolauksen kiristyslevyn ympäri.
- Insert the thread end into the small hole on the bobbin, from the inside out.
- Aseta puola puolausakselin karalle ja työnnä karaa oikealle.
- Press the foot controller gently to start winding. Stop when the bobbin is full and evenly wound.
- Cut the thread, push the spindle back to the left, and remove the bobbin.
1.5 Koneen langoitus
Noudata näitä ohjeita ylä- ja alalangan pujottamiseen oikein.
Ylempi lanka:
- Nosta paininjalka ja neula ylimpään asentoonsa.
- Aseta lankarulla lankatappiin.
- Ohjaa lanka ylemmän langanohjaimen läpi.
- Pass the thread down into the tension discs, then up and through the take-up lever from right to left.
- Guide the thread down through the remaining thread guides and finally through the eye of the needle from front to back.
- Pull about 6 inches of thread under the presser foot and towards the back.
Alalangan pujotus (puolan asettaminen):
- Avaa puolakotelon suojalevy.
- Aseta puola puolakoteloon ja varmista, että lanka purkautuu vastapäivään.
- Guide the thread into the tension spring of the bobbin case.
- Sulje puolan suojalevy.
- Hold the upper thread lightly, turn the handwheel towards you to lower and raise the needle, catching the bobbin thread. Pull both threads under the presser foot and to the back.
2. Koneen käyttö
This section details the basic operations for sewing with your Brother LS-1217.
2.1 Perusompeleen valinta
Your machine offers various stitch patterns. To select a stitch, turn the pattern selection dial until the desired stitch symbol aligns with the indicator mark. Refer to the stitch chart on your machine for available options.
2.2 Fabric Placement
Place the fabric under the presser foot, aligning the edge with the desired seam allowance guide on the needle plate. Lower the presser foot using the presser foot lever.
2.3 Ompelemisen aloittaminen
With the presser foot lowered, gently press the foot controller. The machine will begin to sew. Guide the fabric gently; do not pull or push it, as this can bend the needle or affect stitch quality.
2.4 Käänteinen ompelu
To secure the beginning and end of a seam, use the reverse stitch lever. Press and hold the lever while sewing to stitch backward. Release the lever to resume forward stitching.
2.5 Sauman viimeistely
When you reach the end of your seam, perform a reverse stitch for a few stitches, then release the foot controller. Raise the needle to its highest position and lift the presser foot. Pull the fabric towards the back, then cut the threads using the thread cutter on the machine or scissors, leaving about 4-6 inches of thread tails.
3. Huolto
Regular maintenance ensures the longevity and optimal performance of your Brother LS-1217.
3.1 Koneen puhdistaminen
Lint and dust can accumulate in the bobbin area and feed dogs, affecting stitch quality. Disconnect the machine from power before cleaning.
- Remove the needle, presser foot, and needle plate.
- Use the small brush provided with your machine (or a soft brush) to remove lint from the bobbin case, feed dogs, and surrounding areas.
- Do not use compressed air, as it can push lint further into the machine.
- Pyyhi laitteen ulkopinta pehmeällä, kuivalla liinalla.
3.2 Voitelu
The Brother LS-1217 is designed to be largely maintenance-free regarding lubrication. Avoid applying oil unless specifically instructed by a qualified service technician, as improper lubrication can cause damage.
3.3 Neulan vaihto
Replace the needle regularly (approximately every 8-10 hours of sewing or after every major project) and immediately if it becomes bent, dull, or burred. A damaged needle can cause skipped stitches, thread breakage, and fabric damage. Refer to section 1.3 for installation instructions.
4. Vianmääritys
Tässä osiossa käsitellään yleisiä ongelmia, joita saatat kohdata, ja tarjotaan ratkaisuja.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ohitetut ompeleet | Väärä neulan asennus, taipunut neula, väärä neulatyyppi kankaalle, väärä langoitus. | Reinstall needle correctly (flat side to back), replace bent needle, use appropriate needle for fabric, rethread machine completely. |
| Kierteen katkeaminen | Improper threading, incorrect tension, damaged needle, poor quality thread, bobbin wound unevenly. | Rethread machine, adjust tension, replace needle, use good quality thread, rewind bobbin evenly. |
| Fabric Jamming / Bunching | Improper threading, presser foot not lowered, excessive pulling/pushing of fabric, lint buildup. | Rethread machine, ensure presser foot is down, guide fabric gently, clean bobbin area and feed dogs. |
| Epätasaiset ompeleet | Incorrect tension settings, improper threading, dull needle, inconsistent fabric feeding. | Adjust upper and lower thread tension, rethread machine, replace needle, ensure consistent fabric guidance. |
| Kone ei käynnisty | Power cord not connected, power switch off, foot controller not connected, bobbin winder spindle engaged. | Check power connections, turn power switch on, connect foot controller, disengage bobbin winder spindle. |
If these solutions do not resolve the issue, please contact customer support or a qualified service technician.
5. Tekniset tiedot
Key technical specifications for the Brother LS-1217 Sewing Machine.
- Malli: Brother LS-1217
- Ompeletyypit: Multiple utility and decorative stitches (e.g., Straight, Zigzag, Buttonhole)
- Neulajärjestelmä: HAx1 (130/705H)
- Virtalähde: AC 110-120V, 60Hz (North America) / AC 220-240V, 50Hz (Europe/Asia) - (Note: Actual voltage depends on region)
- Mitat (noin): 15.4" x 6.7" x 11.4" (39 cm x 17 cm x 29 cm)
- Paino (noin): 11 lbs (5 kg)
- Suurin ompelunopeus: Jopa 1 100 pistoa minuutissa
- Valaistus: Built-in sewing light
6. Takuu ja tuki
For detailed warranty information, please refer to the warranty card included with your original purchase or visit the official Brother support websivusto. Säilytä ostokuitti takuuvaatimuksia varten.
Asiakastuki: For technical assistance, parts, or service, please contact Brother customer support. Contact details can typically be found on the Brother official websivustolla tai tuotedokumentaatiossa.
Verkkoresurssit: Additional resources, FAQs, and video tutorials may be available on the official Brother support websivusto.