VGEBY Brushless Motor Controller Instruction Manual

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your VGEBY 36V/48V 250W Electric Bicycle Brushless Motor Speed Controller. This controller is designed to provide stable speed and sensitive control for braking and direction changes in electric bicycles and scooters. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Turvallisuustiedot

• Katkaise aina virta ennen asennusta, huoltoa tai vianmääritystä.
• Varmista, että kaikki liitännät ovat tukevasti kiinni ja asianmukaisesti eristettyjä oikosulkujen välttämiseksi.
• Installation should ideally be performed by a qualified technician to avoid damage to the product or personal injury.
• Älä altista ohjainta vedelle tai äärimmäisille lämpötiloille.
• Varmista, että voltage and power ratings of your motor and battery are compatible with this controller (36V/48V, 250W).

3. Tuote ohiview ja Ominaisuudet

The VGEBY Brushless Motor Controller features an aluminum alloy shell with a groove design. This design enhances heat dissipation, protecting the internal circuitry from thermal overloading and ensuring reliable performance. The controller is engineered for sensitive speed control, providing smooth acceleration and responsive braking for your electric vehicle.

Kuva 3.1: Yliview of the VGEBY Brushless Motor Controller, showing its compact design and numerous wire connections.

Kuva 3.2: Yläosa view of the controller, highlighting the aluminum casing and wire harness.

4. Tekniset tiedot

Below are the key specifications for the VGEBY Brushless Motor Controller:

Kuva 4.1: Physical dimensions of the controller, approximately 9cm (3.54 inches) in length, 5.3cm (2.08 inches) in width, and 3cm (1.18 inches) in height.

5. Asennus ja johdotus

The controller features clearly labeled interfaces for easy installation. Follow the steps below and refer to the wiring diagram for correct connections.

Kuva 5.1: The controller with its complete set of wires, each designed for a specific function.

Kuva 5.2: Detailed wiring diagram illustrating each connection point on the controller.

Johdotusliitännät:

• Motor Cable A, B, C: Connect these three cables to the corresponding motor phase wires. These are typically thicker wires.
• Jarruvalo: Connect to your electric bicycle's brake light system.
• Intelligent Identification 1 & 2: These are for automatic motor phase identification. Connect them together briefly during initial setup, then disconnect once the motor runs smoothly.
• Risteilytoiminto: Connect to activate the cruise control feature, if your system supports it.
• Battery Positive Electrode: Connect the red wire to the positive terminal of your 36V/48V battery.
• Speed Steering Handle: Connect to the throttle or speed control grip.
• Low Potential Brake: Connect to the brake lever switch for low-level braking signal.
• Assist Sensor: Yhdistä poljinavustusanturiin (PAS) avustettua ajoa varten.
• Battery Negative Electrode: Connect the black wire to the negative terminal of your 36V/48V battery.

Ensure all connections are firm and insulated to prevent electrical hazards and ensure optimal performance.

6. Käyttöohjeet

Once the controller is correctly installed and all connections are secure:

1. Virta päälle: Turn on the main power switch of your electric bicycle or scooter.
2. Kaasun säädin: Gently twist the speed steering handle (throttle) to engage the motor. The controller will provide steady speed output.
3. Jarrutus: Apply the brakes. The controller is designed for sensitive control of braking, ensuring a quick and safe stop.
4. Poljinavustin: If an assist sensor is connected, pedaling will activate motor assistance, providing power based on your pedaling input.
5. Cruise Function (if applicable): If your system supports and is connected to the cruise function, activate it as per your vehicle's specific instructions to maintain a constant speed.

7. Huolto

To ensure the longevity and optimal performance of your VGEBY Brushless Motor Controller, follow these maintenance guidelines:

• Säännöllinen tarkastus: Periodically check all wire connections for looseness or damage. Ensure they are securely fastened and insulated.
• Puhdistus: Keep the controller clean and free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning. Do not use harsh chemicals or immerse in water.
• Ympäristönsuojelu: Avoid exposing the controller to extreme heat, direct sunlight for prolonged periods, or corrosive environments.
• Lämmön hajoaminen: Varmista, että ohjaimen alumiinikoteloasing is not obstructed, allowing for proper airflow and heat dissipation.

8. Vianmääritys

Jos ohjaimessasi on ongelmia, noudata seuraavia yleisiä vianmääritysohjeita:

• Ei virtaa:
  • Tarkista akun liitännät ja varmista, että akku on ladattu.
  • Verify the main power switch is on.
  • Inspect all power wires for damage or loose connections.
• Moottori ei reagoi:
  • Ensure motor phase wires (Motor Cable A, B, C) are correctly connected.
  • Check the speed steering handle (throttle) connection.
  • If applicable, re-perform the intelligent identification process by connecting the two intelligent identification wires briefly.
• Erratic Speed or Performance:
  • Inspect all signal wires (throttle, brake, assist sensor) for secure connections and damage.
  • Ensure no wires are short-circuiting or making intermittent contact.
• Ylikuumeneminen:
  • Varmista, että ohjain on asennettu paikkaan, jossa on riittävä ilmanvaihto.
  • Verify the motor is not drawing excessive current, which could indicate a motor issue.

Jos ongelmat jatkuvat vianmäärityksen jälkeen, ota yhteyttä asiakastukeen.

9. Takuu ja tuki

Takuu: We offer an unconditional return and refund policy within 180 days if you are not satisfied with our product. This warranty covers manufacturing defects and ensures your satisfaction with the product.

Asiakastuki: For any questions, technical assistance, or warranty claims regarding this product, please contact our customer service team. You can typically find contact information on the product packaging or through your purchase platform. We are committed to providing timely responses and support.