Cloudray F-Theta Lens 300x300mm FL420mm Instruction Manual

1. Tuote ohiview

The Cloudray F-Theta Lens is designed for 1064nm fiber laser machines, enabling precise marking, engraving, and drilling applications. This lens provides a 300x300mm scanning field with a focal length of 420mm, ensuring high stability and optical performance.

Keskeisiä ominaisuuksia ovat:

• Ylivoimainen suorituskyky: Engineered for ultra-fine laser marking and various leading-edge laser applications.
• Korkea vakaus: Features wear resistance and high temperature resistance, reducing thermal focus shift and improving thermal stability.
• Wide Marking Area: Offers a 300x300mm field, allowing consistent and exact spot marking on materials like steel, aluminum, and gold.
• Optimal Optical Properties: Provides up to 97% transmittance with minimal distortion and anti-reflective coatings for extended service life.
• Helppo asennus: Standard M85x1 threading ensures compatibility and straightforward installation with most laser marking machines.

2. Tekniset tiedot

3. Asennus ja asennus

Proper installation of the F-Theta lens is crucial for optimal performance and safety. Always wear appropriate personal protective equipment, including laser safety glasses, when working with laser systems.

1. Valmistelu: Ensure the laser marking machine is powered off and disconnected from the power source.
2. Irrota olemassa oleva linssi (jos sovellettavissa): Carefully unscrew and remove any existing lens from the galvanometer scanner head.
3. Install F-Theta Lens: Gently screw the Cloudray F-Theta Lens into the M85x1 threaded port of the galvanometer scanner head. Ensure it is tightened securely but not excessively to prevent galling of the threads.
4. Tarkista asennus: Confirm the lens is seated correctly and stable.

For a visual guide on installation and initial setup, refer to the video below:

4. Käyttöohjeet

The F-Theta lens works in conjunction with galvanometer mirrors to precisely direct and focus the laser beam across the marking area. Understanding the focal length and field size is essential for accurate operation.

1. Polttovälin säätö: When changing the F-Theta lens size, it is necessary to adjust the focal length in your laser software. This ensures the laser beam is correctly focused on the material surface across the entire scanning field.
2. Ohjelmiston kalibrointi: Utilize your laser marking software (e.g., Lightburn for Mac, EZCAD) to calibrate the new lens. This typically involves setting the correct field size and adjusting galvanometer scales to ensure accurate marking dimensions.
3. Test Marking: Before final production, perform test markings on scrap material to verify focus and accuracy. Adjust software settings as needed.

For detailed calibration steps within the laser software, please refer to the second video:

5. Huolto

Regular maintenance ensures the longevity and performance of your F-Theta lens.

• Puhdistus: Keep the lens surfaces clean and free from dust, debris, and fingerprints. Use only specialized optical cleaning solutions and lint-free wipes designed for laser optics. Avoid abrasive materials or harsh chemicals.
• Varastointi: When not in use, store the lens in its protective casing or a clean, dry environment to prevent damage and contamination.
• Tarkastus: Periodically inspect the lens for any signs of damage, scratches, or coating degradation. Replace the lens if significant damage is observed to maintain laser performance and safety.

6. Vianmääritys

This section addresses common issues you might encounter with your F-Theta lens.

• Poor Focus or Inconsistent Marking:
  • Verify that the focal length in your laser software matches the specifications of the installed lens.
  • Varmista, että linssi on puhdas eikä siinä ole esteitä.
  • Recalibrate the lens within your laser software, paying attention to field size and galvanometer settings.
• Lens Thread Galling:
  • When installing or removing the lens, tighten it only until snug. Avoid overtightening, which can cause the threads to seize or "gall."
  • If galling occurs, carefully apply a small amount of anti-seize compound or optical-grade lubricant to the threads (avoiding optical surfaces) and attempt to loosen gently.
• Reduced Laser Power or Transmittance:
  • Inspect the lens for any damage, scratches, or excessive dust/debris. Clean the lens as per maintenance instructions.
  • Ensure the laser source is operating correctly and its power output is within expected parameters.

7. Takuu ja tuki

Cloudray tarjoaa kattavaa tukea tuotteilleen.

• Takuu: This product is covered by a 2-year comprehensive warranty.
• Tekninen tuki: Lifetime technical support is available to assist with pre-purchase planning, installation, operation, and post-purchase optimization.
• Ota yhteyttä: For support, please visit the official Cloudray websivustolla tai ota yhteyttä asiakaspalveluun.