Transcell TI-500 SL Weighing Indicator

1. Johdanto

The Transcell TI-500 SL is a robust and reliable digital weighing indicator designed for industrial applications. This NTEP and Canadian certified device features a durable NEMA 4X stainless steel enclosure, ensuring protection in harsh environments. It is equipped with a large 0.8-inch backlit LCD screen for clear readability of up to 50,000 display divisions. The TI-500 SL supports up to four 350 Ohm load cells and offers full duplex RS-232 serial communication for integration with various support equipment. Power is supplied via an AC adapter or a rechargeable lead-acid battery, providing flexibility for continuous operation.

Eteenpäin suunnattu view of the Transcell TI-500 SL Weighing Indicator. The device features a stainless steel enclosure with a blue and white control panel. A large digital LCD screen displays '50.0 kg'. Below the screen are several circular buttons for functions like 'UNITS', 'ZERO OFF', 'SET', 'NET GROSS', 'TARE', and 'ON PRINT'. A black cable extends from the bottom of the unit, and an NTEP certification seal is visible in the lower left corner.

2. Turvallisuustiedot

Please read all safety instructions carefully before operating the TI-500 SL indicator. Failure to comply with these instructions may result in injury or damage to the device.

Yleinen turvallisuus

• Operate the device only in environments suitable for its NEMA 4X / IP65 rating.
• Do not attempt to open or repair the indicator yourself. Refer all servicing to qualified personnel.
• Keep the device away from excessive heat, moisture, and corrosive substances.

Sähköturvallisuus

• Use only the provided AC adapter for power and battery charging.
• Varmista, että pistorasia on maadoitettu oikein.
• Katkaise virta ennen puhdistusta tai huoltotoimenpiteitä.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• Transcell TI-500 SL Weighing Indicator
• Stainless Steel Swivel Stand (pre-attached or separate)
• Verkkolaite
• Käyttöopas (tämä asiakirja)

4. Asennus

Fyysinen asennus

1. Place the TI-500 SL indicator on a stable, level surface. The integrated stainless steel swivel stand allows for adjustable viewkulmat.
2. Varmista riittävä ilmanvaihto laitteen ympärillä.

Virtaliitäntä

1. Connect the AC power adapter to the power input port on the indicator.
2. Plug the AC adapter into a suitable power outlet. The internal rechargeable lead-acid battery will begin charging automatically.

Load Cell Connection

The TI-500 SL is designed to drive up to four 350 Ohm load cells.

1. Locate the load cell input terminals on the indicator. These are typically sealed connections to maintain the NEMA 4X rating.
2. Carefully connect the load cell cables to the corresponding terminals, ensuring correct polarity and wiring as per the load cell manufacturer's instructions.
3. Secure all connections to maintain the enclosure's integrity.

Alkuvirta päällä

Paina ON/OFF button to power on the indicator. The display will perform a self-test and then show the current weight reading.

5. Käyttöohjeet

The TI-500 SL features a user-friendly front panel with dedicated function keys.

Peruspunnitus

Once powered on, the indicator will display the weight detected by the connected load cells. Ensure the scale platform is clear before taking a measurement.

Zeroing the Display

To set the display to zero when there is no load on the platform:

• Paina ZERO OFF -painiketta. Näyttö palautuu arvoon 0.00.

Taring (Net/Gross Weight)

To measure the net weight of an item by subtracting the weight of a container:

1. Place the empty container on the scale platform.
2. Paina TAARA button. The display will show 0.00 and the 'NET' indicator will illuminate.
3. Add the item to be weighed into the container. The display will now show the net weight of the item.
4. To return to gross weight, press the NET GROSS -painiketta.

Yksikkömuunnos

To switch between available weighing units (e.g., kg, lb):

• Paina YKSIKÖT button. The display will cycle through the configured units.

Printing Weight Data

If connected to a compatible printer via the RS-232 port:

• Paina ON PRINT button to send the current weight reading to the connected device.

Kalibrointi

Calibration procedures are typically performed by qualified technicians. Refer to the detailed technical manual or contact Transcell Technology support for calibration instructions. All setup parameters can be entered via the front panel keys during calibration mode.

6. Huolto

Puhdistus

The NEMA 4X stainless steel enclosure allows for easy cleaning.

• Irrota virtalähde ennen puhdistamista.
• Wipe the indicator with a damp liinalla ja miedolla pesuaineella.
• Do not use abrasive cleaners or solvents that could damage the display or enclosure.
• Ensure all connections are sealed after cleaning.

Akun hoito

The TI-500 SL is equipped with a rechargeable lead-acid battery.

• Lataa akku täyteen ennen ensimmäistä käyttöä.
• Recharge the battery when the low battery indicator appears or when the display dims.
• For long-term storage, ensure the battery is fully charged and store the unit in a cool, dry place. Recharge periodically if stored for extended periods.

7. Vianmääritys

This section addresses common issues you might encounter with your TI-500 SL indicator.

For issues not listed here or if solutions do not resolve the problem, please contact Transcell Technology customer support.

8. Tekniset tiedot

9. Takuutiedot

Transcell Technology products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Transcell Technology websivusto. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.

10. Tukitiedot

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Transcell Technology customer support. Contact details can typically be found on the manufacturer's official websivustolla tai tuotepakkauksessa.

Manufacturer: Transcell Technology