YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P) User Manual

1. Johdanto

This manual provides essential information for the installation, operation, and maintenance of your YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P). This unmanaged Ethernet switch is designed to provide Power over Ethernet (PoE) to compatible devices, simplifying network infrastructure by delivering both data and power over a single Ethernet cable. Please read this manual thoroughly before using the device to ensure proper and safe operation.

2. Turvallisuustiedot

• Varmista virtalähteen voltage vastaa laitteen etiketissä määritettyjä vaatimuksia.
• Älä avaa laitetta casing. Sisällä ei ole käyttäjän huollettavia osia.
• Avoid placing the switch in areas with high humidity, extreme temperatures, or direct sunlight.
• Varmista riittävä ilmanvaihto kytkimen ympärillä ylikuumenemisen estämiseksi.
• Käytä vain laitteen mukana toimitettua virtalähdettä.
• Do not connect non-PoE devices to PoE ports if they are not designed to handle PoE input, as this may cause damage. This switch is designed to detect PoE devices, but caution is always advised.

3. Pakkauksen sisältö

Upon opening the package, please verify that all items are present and undamaged. If any items are missing or damaged, contact your vendor immediately.

• YuanLey 8 Port 10/100Mbps PoE Switch (Model YS2082F-P)
• Virtalähde
• Käyttöopas (tämä asiakirja)
• Mounting Accessories (if applicable, e.g., rubber feet, wall-mount kit)

4. Tuote ohiview

The YuanLey YS2082F-P is an unmanaged 8-port Power over Ethernet (PoE) switch with 2 dedicated uplink ports. It is designed for small to medium-sized networks requiring reliable power and data transmission to PoE-compatible devices such as IP cameras, VoIP phones, and wireless access points.

Huomautus kuvista: The provided product data did not include specific images for the YS2082F-P model. Therefore, visual representations are omitted from this manual. Please refer to the physical product for exact port layouts and indicator locations.

4.1 Etupaneelin asettelu

The front panel of the switch features the Ethernet ports and LED indicators. A general description is given below.

• PoE Ports (Ports 1-8): These 10/100Mbps RJ45 ports support IEEE 802.3af/at Power over Ethernet, providing both data and power to connected PoE devices.
• Uplink Ports (Ports 9-10): These 10/100Mbps RJ45 ports are used to connect the switch to a router, NVR, or another network switch. They do not provide PoE.
• LED-ilmaisimet:
  • PWR LED: Indicates power status. (On: Power is supplied; Off: No power).
  • Link/Act-LEDit (porttia kohden): Indicates connection status and activity. (On: Link established; Blinking: Data activity; Off: No link).
  • PoE Max LED: Indicates if the total PoE power budget is nearing its limit. (On: PoE power consumption is high; Off: Normal operation).

4.2 Takapaneelin asettelu

The rear panel typically contains the power input and possibly grounding points. A general description is given below.

• Tehon syöttö: Connector for the external power adapter.
• Maadoitusruuvi: (Optional) For connecting a grounding wire to protect against electrical surges.

5. Asennus

5.1 Fyysinen asennus

1. Sijoitus: Place the switch on a stable, flat surface or mount it to a wall using appropriate mounting hardware (if included). Ensure the location is well-ventilated and away from heat sources, moisture, and direct sunlight.
2. Virtaliitäntä: Connect the provided power adapter to the switch's power input port, then plug the adapter into a standard AC power outlet. The PWR LED should illuminate.

5.2 Verkkolaitteiden liittäminen

1. Yhdistä verkkoon: Use a standard Ethernet cable to connect one of the uplink ports (Ports 9 or 10) to your router, modem, or main network switch. The corresponding Link/Act LED should light up.
2. PoE-laitteiden liittäminen: Connect your PoE-compatible devices (e.g., IP cameras, VoIP phones) to any of the PoE ports (Ports 1-8) using standard Ethernet cables. The switch will automatically detect if the connected device is PoE-compatible and supply power. The corresponding Link/Act LED and PoE LED (if available per port) should light up.
3. Connect Non-PoE Devices: You can also connect non-PoE network devices (e.g., computers, NVRs without PoE input) to the PoE ports. The switch will provide data connectivity without supplying power.

Huomautus: This is an unmanaged switch, meaning no configuration is required. It operates as plug-and-play.

6. Käyttöohjeet

The YuanLey YS2082F-P is an unmanaged switch, designed for ease of use. Once connected as described in the Setup section, it will automatically begin functioning.

6.1 Virta päälle

After connecting the power adapter, the switch will power on automatically. The PWR LED will illuminate, indicating that the device is receiving power.

6.2 LED-ilmaisimet

Monitor the LED indicators to understand the status of your network connections:

• PWR LED: Tasainen vihreä valo osoittaa, että kytkin on päällä.
• Link/Act-merkkivalot:
  • Solid green: A stable network link is established on that port.
  • Blinking green: Data is being transmitted or received through that port.
  • Off: No device is connected, or the connected device is not powered on/not functioning correctly.
• PoE Max LED: This LED indicates the overall PoE power consumption. If it lights up, it suggests that the total power drawn by connected PoE devices is approaching the switch's maximum power budget (120W). Consider reducing the number of high-power PoE devices or using a switch with a higher power budget if this LED remains on consistently.

6.3 Unmanaged Operation

As an unmanaged switch, the YS2082F-P requires no software configuration. It automatically handles network traffic, including auto-negotiation for speed and duplex mode, and auto MDI/MDIX for cable type detection. Simply plug in your devices, and the switch will manage the connections.

7. Huolto

• Puhdistus: Puhdista kytkimen ulkopinta pehmeällä, kuivalla liinalla. Älä käytä nestemäisiä tai aerosolipuhdistusaineita.
• Ilmanvaihto: Varmista, että tuuletusaukot eivät ole tukossa ylikuumenemisen estämiseksi.
• Laiteohjelmisto: As an unmanaged switch, firmware updates are typically not required or available for user installation.
• Ympäristöolosuhteet: Operate the switch within its specified temperature and humidity ranges to ensure optimal performance and longevity.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

YuanLey products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official YuanLey website. For technical support, troubleshooting assistance, or to report issues, please contact YuanLey customer service through the contact information provided on their official websivustollasi tai ostoalustallasi.

Verkkoresurssit: For additional information, FAQs, and support, please visit the YuanLey Brand Store.