Johdanto
Kiitos ostoksestasiasing the LUXMAN L-505V Integrated Amplifier. This manual provides essential information for the safe and efficient operation of your new audio component. Please read this manual thoroughly before using the amplifier and retain it for future reference.
Turvallisuusohjeet
Turvallisen käytön varmistamiseksi ja vaurioiden välttämiseksi noudata seuraavia varotoimia:
- Älä altista laitetta sateelle tai kosteudelle.
- Älä avaa c:täasing. Anna kaikki huoltotoimenpiteet pätevän henkilöstön tehtäväksi.
- Varmista asianmukainen ilmanvaihto; älä tuki tuuletusaukkoja.
- Käytä vain määritettyä virtalähdettä voltage.
- Vältä laitteen sijoittamista lämmönlähteiden lähelle tai suoraan auringonvaloon.
- Irrota virtajohto ukkosmyrskyjen aikana tai jos laitetta ei käytetä pitkään aikaan.
Asennus
1. Purkaminen
Poista varovasti amplifier from its packaging. Retain all packing materials for future transport or storage.
2. sijoitus
Aseta amplifier on a stable, level surface away from direct sunlight, heat sources, and excessive dust or humidity. Ensure adequate space around the unit for proper ventilation.
3. Äänilähteiden liittäminen
Connect your audio source components (e.g., CD player, turntable, tuner) to the corresponding input jacks on the rear panel of the L-505V using high-quality RCA cables.
- CD-sisääntulo: For CD players or other line-level sources.
- Phono-tulo: For turntables. Ensure your turntable has a compatible cartridge (MM/MC).
- Line 1/2/3 Inputs: For additional line-level sources.
4. Kaiuttimien kytkeminen
Connect your speakers to the speaker terminals on the rear panel. Observe correct polarity (+ to + and - to -) for each speaker. The L-505V supports two sets of speakers (A and B).
- Varmista, että amplifier is turned off before making connections.
- Strip approximately 10-15mm of insulation from the speaker wire ends.
- Loosen the binding posts, insert the bare wire, and tighten securely.
- Repeat for all speaker connections, ensuring correct left/right and positive/negative orientation.
5. Virtaliitäntä
After all audio and speaker connections are made, connect the supplied power cord to the AC inlet on the rear panel and then to a suitable wall outlet.
Käyttöohjeet
1. Virta päälle/pois
Paina POWER etupaneelin painiketta kytkeäksesi amppäälle tai pois päältä. Virran merkkivalo palaa, kun laite on päällä.
2. Tulon valinta
Käytä TULONVALITSIN knob or buttons to choose the desired audio source (e.g., CD, Phono, Line 1).
3. Äänenvoimakkuuden säätö
Säädä äänen kokonaistasoa käyttämällä suurta VOLUME knob. Start at a low volume and gradually increase to a comfortable listening level.
4. Äänen säätimet
The L-505V features BASS ja Diskantti controls to fine-tune the sound. Adjust these to your preference. For a pure sound, set them to their center (flat) position or engage the ÄÄNI tappio toiminto, jos se on saatavilla.
5. Tasapainon hallinta
The SALDO control adjusts the relative volume between the left and right speakers. Set it to the center position for equal output.
6. Kuulokelähtö
Liitä kuulokkeet liittimeen PUHELIMET jack on the front panel. This will typically mute the main speaker outputs.
Huolto
1. Puhdistus
Pyyhi laitteen ulkopuoli amplifier with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents.
2. Varastointi
If storing the unit for an extended period, disconnect the power cord and store it in a cool, dry place, preferably in its original packaging.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei virtaa | Virtajohto irti; Virtapistoke viallinen; AmpPaineilmasulake palanut. | Tarkista virtajohdon liitäntä; Kokeile toista pistorasiaa; Ota yhteyttä huoltoon sulakkeen vaihtoa varten. |
| Ei ääntä | Incorrect input selected; Volume too low; Speaker cables disconnected; Mute function active. | Valitse oikea tulo; Lisää äänenvoimakkuutta; Tarkista kaiuttimien liitännät; Poista mykistys käytöstä. |
| Vääristynyt ääni | Input level too high; Speaker impedance mismatch; Damaged cables. | Vähennä lähteen äänenvoimakkuutta; varmista, että kaiuttimet sopivat yhteen amplifier impedance; Check/replace cables. |
| Sound from only one channel | Balance control off-center; Loose speaker cable; Faulty source cable. | Adjust balance control; Check speaker connections; Check/replace source cables. |
If the problem persists after trying these solutions, please contact LUXMAN customer support or an authorized service center.
Tekniset tiedot (tyypillinen)
Huomautus: Tekniset tiedot voivat muuttua ilman erillistä ilmoitusta tuotekehityksen vuoksi.
- Nimellinen lähtö: 100W + 100W (8 ohms), 150W + 150W (4 ohms)
- Tuloherkkyys/impedanssi:
- PHONO (MM): 2.5mV / 47k ohms
- PHONO (MC): 0.3mV / 100 ohms
- LINE: 180mV / 47k ohms
- Taajuusvaste:
- PHONO: 20Hz - 20kHz (±0.5dB)
- LINE: 20Hz - 100kHz (±3dB)
- Harmoninen kokonaissärö: Less than 0.007% (1kHz, 8 ohms)
- Signaali-kohinasuhde:
- PHONO (MM): >91dB
- PHONO (MC): >75dB
- LINJA: >105dB
- Virrankulutus: 270W (max), 0.4W (standby)
- Mitat (L x K x S): 440 x 178 x 454 mm (including front panel knobs and rear terminals)
- Paino: 22.5 kg
Takuu ja tuki
LUXMAN products are designed for reliability and performance. This product comes with a limited warranty. Please refer to the separate warranty card included with your purchase for specific terms and conditions.
For technical support, service, or inquiries, please contact your authorized LUXMAN dealer or visit the official LUXMAN websivusto: