deleyCON Mechanical Timer Switch MK2636 User Manual

1. Johdanto

This manual provides detailed instructions for the deleyCON Mechanical Timer Switch, designed to automate the on/off cycles of various indoor electrical devices. Please read this manual carefully before using the product to ensure safe and efficient operation.

2. Turvallisuusohjeet

• Tämä ajastin on suunniteltu vain sisäkäyttöön. Do not expose it to moisture or outdoor conditions.
• Ensure the connected device's power consumption does not exceed the timer's maximum load of 3500 W (16 A).
• Always disconnect the timer from the power outlet before cleaning or if it is not in use for an extended period.
• Do not connect multiple timers in series.
• The product features increased touch protection for safety.
• If the timer makes an audible mechanical clicking sound, this is normal operation for the switching segments.

3. Tuote ohiview

The deleyCON Mechanical Timer Switch features a robust design for reliable operation. Key components include the 24-hour dial with 15-minute segments and a manual override switch.

Kuva 3.1: Edessä view of the deleyCON Mechanical Timer Switch, showing the central socket and the 24-hour rotating dial.

Kuva 3.2: Sivu view of the timer, highlighting the manual override switch (I/O/Timer symbol) and the textured edge of the dial for easy rotation.

Kuva 3.3: Takaisin view of the timer, displaying technical specifications such as voltage, frequency, maximum load, and safety certifications.

4. Asennusohjeet

Follow these steps to configure your deleyCON Mechanical Timer Switch:

1. Prepare the Timer Segments: The timer's central dial is surrounded by small pins, each representing a 15-minute interval. When new, all pins are typically pushed down (ON). To set a program, first pull kaikki pins upwards (OFF position) around the entire 24-hour dial.
2. Set the ON/OFF Periods: Push down the pins corresponding to the time periods you want the connected device to be ON. Each pushed-down pin activates the power for 15 minutes. For example, to have power from 7:00 AM to 2:00 PM, push down all pins between the '7' and '14' marks on the dial. If you need power for only one hour (e.g., 9:00 PM to 10:00 PM), push down the four pins within that hour segment.
3. Aseta nykyinen aika: Rotate the entire dial clockwise until the small arrow (usually located in the inner circle, pointing towards the numbers 1-24) aligns with the current time. Be precise, as this arrow can be small and blend with the background.
4. Liitä virtalähteeseen: Plug the timer into a standard indoor wall socket.
5. Yhdistä laite: Plug the device you wish to control into the timer's socket.

Kuva 4.1: A hand demonstrating how to adjust the 24-hour dial and push down the 15-minute segments to set the desired ON times.

5. Käyttöohjeet

The deleyCON Mechanical Timer Switch offers both programmed and manual operation modes.

5.1 Manuaalinen ohituskytkin

On the right side of the timer, there is a sliding switch with three positions:

• 'I' (PÄÄLLÄ): When the switch is in the 'I' (upwards) position, the connected device will receive continuous power, regardless of the dial's programmed settings. This is for constant ON operation.
• Timer Symbol (Middle): When the switch is in the middle position (indicated by a clock or timer symbol), the timer will operate according to the ON/OFF periods you have set on the dial.
• 'O' (POIS PÄÄLTÄ): When the switch is in the 'O' (downwards) position, the connected device will remain OFF, regardless of the dial's programmed settings. This is for constant OFF operation.

Varmista aina, että kytkin on asennossa Ajastimen symboli automaattisen toiminnan asento.

Kuva 5.1: The deleyCON timer in use, connected to a lamp, illustrating how it controls power to an appliance based on its settings.

6. Huolto

• To clean the timer, unplug it from the wall socket. Use a soft, dry cloth. Do not use liquid cleaners or immerse the timer in water.
• Regularly check the timer and its connected cables for any signs of damage. If damage is found, discontinue use and replace the unit.
• Säilytä ajastin kuivassa, viileässä paikassa, kun se ei ole käytössä.

7. Vianmääritys

• Timer is not switching ON/OFF:
  • Check if the manual override switch is in the 'Timer Symbol' position.
  • Verify that the pins for the desired ON period are pushed down.
  • Varmista, että kellonaika on asetettu oikein kellotauluun.
  • Check if the wall socket is receiving power.
• Timer is making a clicking sound: This is normal for mechanical timers as the internal mechanism operates the switching segments. It does not indicate a fault.
• Liitetty laite ei saa virtaa:
  • Ensure the device itself is switched ON.
  • Test the device by plugging it directly into a wall socket to confirm it is functional.

8. Tekniset tiedot

Kuva 8.1: Visual representation of the timer's dimensions: 8cm width, 8cm height, and 6cm depth.

9. Takuu ja tuki

For warranty information or technical support, please contact deleyCON customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Valmistaja: deleyCON