CYCPLUS USB ANT+ Stick Dongle Adapter U1:n käyttöohje

1. Tuote ohiview

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 is a wireless receiver designed to bridge the gap between traditional bike trainers and modern cycling software. It receives ANT+ wireless radio signals from various sensors and translates them into a USB protocol, enabling seamless integration with popular training applications. This device is essential for indoor cycling enthusiasts looking to enhance their virtual training experience.

CYCPLUS USB ANT+ Stick Dongle Adapter, front view

Kuva 1: Edessä view of the CYCPLUS USB ANT+ Stick Dongle Adapter. This compact device features a standard USB-A connector on one end and the ANT+ receiver module on the other, designed for easy plug-and-play functionality with computers.

2. Asennusopas

Setting up your CYCPLUS USB ANT+ Stick Dongle Adapter is straightforward.

Järjestelmän yhteensopivuus: Ensure your computer runs on a compatible operating system. The U1 dongle is designed for use with PC/Laptop running Windows or macOS. Please note: This device is not compatible with Android or iPhone mobile devices.
Kytke dongle: Insert the USB ANT+ stick into an available USB port on your desktop or laptop computer.
Ohjaimen asennus: In most cases, the required drivers will install automatically upon connecting the device to your computer. If automatic installation does not occur, or if you encounter any driver-related issues, please contact CYCPLUS customer service for assistance.
Optimaalinen sijoitus: For best performance, position the dongle within 3 meters (approximately 10 feet) of your ANT+ sensors (e.g., bike trainer, heart rate monitor, speed/cadence sensors). The maximum effective range is 5 meters.

CYCPLUS USB ANT+ Stick Dongle Adapter, side view showing USB connector

Kuva 2: Sivu view of the CYCPLUS USB ANT+ Stick Dongle Adapter, highlighting the USB connector. This view demonstrates its compact design, making it easy to plug into any standard USB port.

3. Käyttöohjeet

Once the ANT+ dongle is successfully set up, you can begin using it with your preferred cycling applications.

Ohjelmistojen yhteensopivuus: The CYCPLUS U1 dongle is compatible with popular indoor cycling software platforms, including Zwift, TheSufferfest, TrainerRoad, and Rouvy.
Sensor Data Collection: The dongle is designed to collect various sensor data via the ANT+ wireless protocol. This includes:
- Cadence sensors
- Nopeusanturit
- Heart rate monitors
- Tehomittarit
Ensure your sensors are ANT+ compatible and properly paired within your cycling application.
Channel Support: The dongle supports 8 ANT+ channels, allowing it to connect to multiple sensors simultaneously.
Using with Cycling Software:
1. Launch your chosen cycling application (e.g., Zwift).
2. Navigate to the device pairing or sensor connection section within the application.
3. The application should detect the ANT+ dongle and then allow you to search for and connect to your ANT+ enabled sensors.
4. Follow the on-screen prompts within the application to complete the pairing process for each sensor.

4. Huolto

The CYCPLUS USB ANT+ Stick Dongle Adapter U1 requires minimal maintenance to ensure its longevity and optimal performance.

Puhdistus: Gently wipe the exterior of the dongle with a soft, dry cloth to remove dust or debris. Avoid using liquid cleaners or abrasive materials.
Varastointi: When not in use, store the dongle in a dry, cool place, away from direct sunlight and extreme temperatures. Protect the USB connector from damage.
Käsittely: Handle the dongle with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

5. Vianmääritys

If you encounter issues with your CYCPLUS USB ANT+ Stick Dongle Adapter, refer to the following common troubleshooting steps:

Ongelma	Mahdollinen syy	Ratkaisu
Dongle not recognized by computer.	Löysä USB-liitäntä. Driver not installed or corrupted. Viallinen USB-portti.	Ensure the dongle is firmly inserted into the USB port. Kokeile toista tietokoneesi USB-porttia. Check Device Manager (Windows) or System Information (macOS) for driver status. If needed, contact customer service for driver support. Käynnistä tietokone uudelleen.
Sensors not connecting or frequently disconnecting.	Dongle too far from sensors. Häiriöt muista langattomista laitteista. Sensor battery low. Incorrect sensor pairing in software. Software-specific ANT+ protocol issues (e.g., Wahoo Kickr protocol vs. ANT FEC).	Move the dongle closer to your sensors (ideally within 3 meters). Minimize other wireless devices (Wi-Fi routers, Bluetooth devices) near the dongle during use. Replace batteries in your ANT+ sensors. Ensure correct sensors are selected and paired within your cycling application. If using a Wahoo trainer, try switching to ANT FEC protocol in your software settings if available.
Dongle not working with Android/iPhone.	Yhteensopimattomuus.	The CYCPLUS U1 dongle is designed for Windows and macOS computers only and is not compatible with Android or iPhone devices.

6. Tekniset tiedot

Ominaisuus	Yksityiskohta
Merkki	CYCPLUS
Mallinumero	U10
Väri	Black (U1 Stick)
Materiaali	ABS
Mitat (P x L x K)	18.5 mm x 14.5 mm x 6 mm (0.72" x 0.57" x 0.24")
Tuotteen paino	1.7g (0.06oz) / 0.634 ounces (packaged)
Langaton protokolla	2.4Ghz ANT+ wireless communications protocol
Alue	5 meters (Best performance within 3 meters)
Kanavan numero	8
Laitteistorajapinta	USB
Data Link Protocol	USB
Tiedonsiirtonopeus	3 megabittiä sekunnissa
Yhteensopivat käyttöjärjestelmät	Windows, macOS
Tuetut ohjelmistot	Zwift, TheSufferfest, TrainerRoad, Rouvy

7. Takuu ja tuki

CYCPLUS is committed to providing high-quality products and excellent customer service.

Takuu: All CYCPLUS products, including the USB ANT+ Stick Dongle Adapter U1, come with a two-year warranty and full lifetime service.
Asiakastuki: If you have any questions, require technical assistance, or encounter any issues not covered in this manual, please do not hesitate to contact CYCPLUS customer service. We are always ready to assist you.

CYCPLUS U10