EISL Leon NI183ESCR-PR-A Spiral Spring Kitchen Tap Instruction Manual

Johdanto

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EISL Leon NI183ESCR-PR-A Spiral Spring Kitchen Tap. Please read this manual carefully before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Turvallisuustiedot

• Sulje aina päävesihana ennen asennus- tai huoltotöiden aloittamista.
• Varmista, että kaikki liitännät ovat tiukasti kiinni vuotojen estämiseksi.
• Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä pätevään putkimieheen.
• Do not use abrasive cleaners or harsh chemicals on the tap's surface, as this may damage the finish.
• This tap is designed for high-pressure water systems. It is suitable for instantaneous water heaters but not for under-sink appliances.

Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• EISL Leon NI183ESCR-PR-A Kitchen Tap unit
• Quick mounting set (central screw)
• Flexible hoses (approx. 45 cm length) for hot and cold water connection
• Kokoamisohjeet

Asennus ja asennus

Follow these steps for proper installation of your kitchen tap:

1. Valmistele asennusalue: Turn off the main water supply. Clear the area around the sink where the tap will be installed. Ensure the mounting hole in your sink or countertop is appropriate for the tap's base diameter (approximately 55 mm).
2. Connect Flexible Hoses: Attach the flexible hot and cold water hoses to the corresponding inlets on the tap base. Hand-tighten first, then use a wrench to secure them, ensuring not to overtighten.
3. Insert Tap into Mounting Hole: Place the tap unit into the prepared mounting hole. Ensure the tap is correctly oriented.
4. Kiinnitä hana: From underneath the sink, slide the rubber gasket and metal washer onto the threaded rod of the tap. Secure the tap using the quick mounting set (central screw). Tighten the screw firmly to prevent the tap from moving.
5. Liitä vesijohto: Connect the flexible hoses to your hot and cold water supply lines. For UK plumbing systems, it may be necessary to use 15mm Compression by 3/8" BSP Male Iron Thread European Flexible Tap Adapters (not included). Ensure all connections are watertight.
6. Testi vuotojen varalta: Slowly turn on the main water supply. Check all connections for any signs of leaks. Operate the tap to ensure water flows correctly and at the desired temperature.

Image: The EISL Leon Spiral Spring Kitchen Tap with its extendable dish rinser, installed in a kitchen sink. This image illustrates the tap's design and how it appears when mounted.

Image: Technical drawing showing the dimensions of the EISL Leon Spiral Spring Kitchen Tap. Key measurements include a total height of 545 mm, a spout reach of 253 mm, and a base diameter of 55 mm.

Käyttöohjeet

Your EISL Leon kitchen tap is designed for ease of use and versatility:

• Veden virtauksen ja lämpötilan säätö: Use the single lever handle to control both water flow and temperature. Moving the lever up increases flow, and moving it down decreases flow. Moving the lever to the right provides cold water, and moving it to the left provides hot water.
• Kylmäkäynnistystoiminto: When the lever is in the central position, only cold water will flow, contributing to energy saving.
• Extendable Dish Rinser: The spiral spring arm allows the dish rinser to be pulled down and maneuvered for various tasks, such as filling tall vessels or washing fruits and vegetables.
• Jet Types: The dish rinser features two jet types. Press the button on the rinser head to switch between a concentrated stream and a spray function.
• 360° kääntyvä juoksuputki: The entire tap spout can swivel 360 degrees, making it ideal for double sinks or for directing water flow precisely where needed.

Huolto

Regular maintenance ensures the longevity and optimal performance of your tap:

• Pinnan puhdistus: Clean the tap regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the chrome finish. Rinse thoroughly with clean water and dry with a soft cloth.
• Kalkinpoisto: The shower head features anti-limescale nubs. Gently rub these nubs to dislodge any limescale buildup, ensuring consistent water flow. For stubborn limescale, use a mild descaling solution specifically designed for kitchen fixtures, following the product's instructions.
• Tarkista vuodot: Periodically inspect all connections for any signs of leaks. Tighten connections if necessary, but do not overtighten.

Vianetsintä

If you encounter issues with your tap, refer to the following common problems and solutions:

Tekniset tiedot

Takuu ja tuki

This EISL product comes with a 3 vuoden valmistajan takuu. The specific warranty conditions are detailed within the assembly instructions provided with your product. Your statutory warranty rights remain unaffected by this manufacturer's warranty.

For technical support or warranty claims, please refer to the contact information provided in the original packaging or on the official EISL websivusto.