Johdanto
Welcome to your new Technoline WS 8006 Radio-Controlled Wall Clock. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the clock.
Tärkeimmät ominaisuudet
- DCF-77 radio-controlled time with manual setting option for precise timekeeping.
- Automatic Summer/Winter time adjustment.
- Selectable 12/24 hour display format.
- Multilingual weekday display (German, English, French, Spanish, Italian, Dutch, Danish).
- Comprehensive calendar display including date, month, and day of the week.
- Seconds display for enhanced precision.
- Time zone offset option for regional adjustments.
- Alarm with snooze function (5-minute interval).
- Crescendo alarm for a gentle wake-up.
- Current indoor temperature display in Celsius (°C) or Fahrenheit (°F), ranging from 0°C to 50°C.
- Indoor humidity display in percentage (% RH).
- Versatile design for wall mounting or tabletop use with a foldable stand.
- Large, high-contrast digits for excellent readability from a distance.
Pakkauksen sisältö
- Technoline WS 8006 Radio-Controlled Wall Clock
- Käyttöohje (tämä asiakirja)
Asennus
Akun asennus
The clock requires 2 x AA 1.5V batteries, which are not included in the package.
- Locate and open the battery compartment cover on the back of the clock.
- Insert 2 new AA 1.5V batteries, ensuring correct polarity (+ and - symbols).
- Sulje paristolokeron kansi kunnolla.
Upon battery installation, the clock will automatically begin searching for the DCF-77 radio signal.
Initial Signal Reception
For optimal signal reception, place the clock near a window and away from electronic devices that may cause interference. The radio signal icon on the display will flash during the search.
Once the DCF-77 signal is successfully received, the time, date, and weekday will be set automatically. This synchronization process may take several minutes. If the signal is not received within 10 minutes, try repositioning the clock or proceed with manual time setting.
Käyttöohjeet
Manuaalinen ajan asetus
In situations where the radio signal is weak or unavailable, you can manually set the time and date.
- Paina ja pidä painettuna SARJA button (usually located on the back) for a few seconds to enter manual setting mode.
- Käytä + or - -painikkeita säätääksesi vilkkuvaa arvoa (esim. tunti, minuutti, vuosi, kuukausi, päivä).
- Paina SARJA again to confirm the current setting and move to the next adjustable parameter.
- To exit setting mode, press the MODE button or wait for the clock to automatically exit after a period of inactivity.
12/24 tunnin muodon valinta
Paina 12/24 button (or similar, if available) to toggle between the 12-hour format (with AM/PM indicator) and the 24-hour format.
Lämpötilayksikön valinta
Paina ° C / ° F button (or similar) to switch the temperature display between Celsius and Fahrenheit.
Hälytysasetus
- Paina HÄLYTYS -painiketta kerran nähdäksesi nykyisen herätysajan.
- Paina ja pidä painettuna HÄLYTYS button to enter alarm setting mode. The alarm hour will flash.
- Käytä + or - buttons to set the desired alarm hour, then press HÄLYTYS vahvistaaksesi.
- Hälytyksen minuuttiluku vilkkuu. Käytä + or - buttons to set the desired alarm minute, then press HÄLYTYS vahvistaaksesi ja poistuaksesi hälytysasetustilasta.
- Paina HÄLYTYS button once more to activate or deactivate the alarm. An alarm icon will appear on the display when the alarm is active.
Torkkutoiminto
Kun hälytys soi, paina TORKUTA button (or any button other than the alarm off button) to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes.
To stop the alarm completely, press the designated HÄLYTYS POIS button (or similar, usually the ALARM button itself if pressed during the alarm sound).
Näytön ymmärtäminen
The Technoline WS 8006 features a clear, high-contrast LCD display designed for easy readability, showing various information simultaneously.
This image illustrates the main display of the Technoline WS 8006 clock. The upper section prominently shows the current time (e.g., 12:34 PM) with seconds (e.g., 48) and a radio signal reception indicator. The lower section provides the indoor temperature (e.g., 23.6°C), the current date (e.g., 2-WED, indicating February, Wednesday), and the indoor relative humidity (e.g., 47%). The 'techno line' brand logo is visible at the bottom center of the display.
- Aikanäyttö: Large, easy-to-read digits show the current time in either 12-hour (with PM indicator) or 24-hour format. Smaller digits display the seconds.
- Radio Signal Indicator: A small antenna icon indicates the status of the DCF-77 radio signal reception. A solid icon signifies successful reception, while a flashing icon indicates the clock is actively searching for the signal.
- Lämpötilanäyttö: Shows the current indoor temperature, switchable between Celsius (°C) and Fahrenheit (°F).
- Päivämäärän näyttö: Displays the current date, including the month and the day of the week.
- Kosteusnäyttö: Shows the current indoor relative humidity as a percentage (% RH).
- Hälytysilmaisin: (Not visible in the provided image, but present when alarm is active) An icon will appear on the display when the alarm function is enabled.
Huolto
To ensure the longevity and accurate operation of your Technoline WS 8006 clock, please follow these maintenance guidelines:
- Puhdistus: Wipe the clock's casing and display with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the display or the clock's finish.
- Akun vaihto: Replace the batteries when the display becomes dim or the clock ceases to function correctly. Always replace both batteries simultaneously with new ones of the same type and voltage.
- Sijoitus: Avoid placing the clock in direct sunlight, near strong heat sources (e.g., radiators, ovens), or in areas with extremely high humidity, as these conditions can affect the clock's accuracy and lifespan.
- Hävittäminen: Dispose of used batteries and the device responsibly, adhering to all local regulations for electronic waste and battery recycling.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Kellon näyttö on tyhjä tai himmeä. | Paristot ovat tyhjentyneet tai ne on asetettu väärin. | Check battery polarity. Replace with new AA 1.5V batteries. |
| Aika on väärä tai se ei asetu automaattisesti. | Poor DCF-77 radio signal reception. Clock is out of signal range or experiencing interference. | Move the clock to a different location, ideally near a window and away from other electronic devices (TVs, computers, microwaves). Allow time for signal reception. Manually set the time if automatic synchronization fails. |
| Temperature or humidity readings appear inaccurate. | Sensor obstruction or extreme environmental conditions (e.g., direct sunlight, strong drafts). | Ensure the clock's sensors are not blocked. Allow the clock to acclimate to its environment for at least 30 minutes after moving it. Avoid placing it in areas with rapid temperature or humidity fluctuations. |
| Hälytys ei soi. | Alarm function is not activated. Alarm time is incorrectly set. | Verify that the alarm icon is displayed on the screen, indicating it is active. Check the alarm settings to ensure the correct time is programmed. |
Tekniset tiedot
- Malli: Technoline WS 8006
- Mitat (P x L x K): 280 x 245 x 32 mm (11.02 x 9.65 x 1.26 tuumaa)
- Paino: 680 g (1.5 lbs)
- Teho: 2 x AA 1.5V paristot (ei sisälly)
- Lämpötila-alue: 0 °C - 50 °C (32 °F - 122 °F)
- Kosteusnäyttö: Indoor relative humidity (% RH)
- Time Reception: DCF-77 radio signal
- Näyttötyyppi: Digitaalinen nestekidenäyttö
- CasinMateriaali: Akryylinitriilibutadieenistyreeni (ABS)
- Väri: Antrasiitti
Takuu ja tuki
For detailed warranty information, product registration, or customer support, please refer to the specific documentation provided with your purchase. You may also visit the official Technoline website or contact their customer service directly. Please retain your proof of purchase for any warranty claims.