Apogee MiC Plus
Apogee MiC Plus User Manual
Studio Quality USB Microphone
Johdanto
The Apogee MiC Plus is a studio-quality USB microphone designed for pristine sound capture. It features a cardioid condenser mic capsule, a built-in mic pre-amp, and a zero-latency headphone output, making it ideal for recording vocals, podcasts, and instruments on various platforms including macOS, iOS, and Windows.
Figure 1: Apogee MiC Plus with included desktop tripod.
Mitä laatikossa on
- Apogee MiC Plus Microphone
- Lightning iOS cable
- USB-C-kaapeli
- USB-A-kaapeli
- Pöytäjalusta
- Mikrofonin klipsi
Figure 2: Contents of the Apogee MiC Plus package.
Asennus
Yhdistäminen laitteeseen
- Valitse oikea kaapeli: Select the appropriate cable for your device. Use the Lightning cable for iOS devices, and either the USB-C or USB-A cable for computers (macOS or Windows).
- Connect the MiC Plus: Plug the micro-USB end of the chosen cable into the MiC Plus.
- Yhdistä laitteeseen: Plug the other end of the cable into your computer or iOS device.
- Virta päälle: The MiC Plus is bus-powered and will power on automatically when connected. The status LED will illuminate.
Figure 3: MiC Plus connected to a laptop for recording.
Kuulokkeiden valvonta
The MiC Plus features a powerful headphone output with a blend feature for zero-latency monitoring. This allows you to hear your input signal directly without any delay, which is crucial for accurate recording.
- Kuulokkeiden liittäminen: Plug your headphones into the 3.5mm headphone jack on the MiC Plus.
- Adjust Blend: Use the control knob on the MiC Plus to adjust the blend between your input signal (microphone) and playback from your device. This ensures you can monitor your performance clearly.
Figure 4: Close-up of the MiC Plus ports, including the headphone jack.
Operating the MiC Plus
Hanki hallinta
The MiC Plus features 46dB of mic preamp gain, digitally controlled for greater precision. This allows you to set the optimal input level for your recordings.
- Vahvistuksen säätö: Use the control knob on the MiC Plus to increase or decrease the microphone's input gain. Monitor the input levels in your recording software to avoid clipping (distortion).
- Mykistystoiminto: To mute the microphone, press the control knob in. The status LED will change to indicate mute status.
Figure 5: The control knob on the MiC Plus for gain adjustment and muting.
Recording with "First Take" Application
"First Take" is a free podcast recording application that allows you to connect up to 4 different Apogee mics to a single computer or USB Hub. It simplifies the podcast recording process.
Video 1: Introduction to First Take, demonstrating multi-mic podcast recording with Apogee microphones.
- Install First Take: Download and install the "First Take" application on your compatible computer.
- Mikrofonien liittäminen: Connect your Apogee MiC Plus (and up to three other compatible Apogee mics) to your computer or a USB hub.
- Launch First Take: Open the application. It will automatically detect connected Apogee microphones.
- Säädä tasoja: Use the individual faders within the "First Take" interface to set the recording levels for each microphone.
- Aloita tallennus: Click the "REC" button to begin your podcast recording.
- Pääsy tallenteisiin: Your recordings will be saved and can be accessed directly from within the "First Take" application.
Figure 6: Multiple MiC Plus units used for a podcast recording session.
Huolto
- Puhdistus: Use a soft, dry cloth to clean the exterior of the MiC Plus. Do not use liquid cleaners or solvents.
- Varastointi: When not in use, store the MiC Plus in a protective case or bag to prevent dust and damage.
- Kaapelihuolto: Handle cables carefully. Avoid sharp bends or kinks that can damage the internal wiring.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei ääntä mikrofonista | Incorrect cable connection, software input not selected, microphone muted, low gain. | Ensure cables are securely connected. Check your recording software's audio input settings to confirm MiC Plus is selected. Press the control knob to unmute. Increase gain. |
| Vääristynyt ääni | Tulosignaalin vahvistus liian korkea (leikkautuminen). | Reduce the input gain using the control knob on the MiC Plus or within your recording software. |
| Ei ääntä kuulokkeista | Headphones not connected, headphone volume too low, blend knob setting. | Ensure headphones are fully plugged in. Adjust headphone volume on your device or the MiC Plus. Check the blend knob to ensure you are monitoring the correct source. |
| Laite ei tunnista mikrofonia | Driver issue (Windows), incompatible device, faulty cable. | Try a different USB port or cable. For Windows, ensure drivers are up to date (usually plug-and-play, but check Apogee's website if issues persist). Verify device compatibility. |
Tekniset tiedot
- Mallin nimi: Apogee MiC Plus
- Merkki: Apogee
- Mikrofonin tyyppi: Kardioidilauhdutin
- Napakuvio: Yksisuuntainen
- Yhteystekniikka: USB
- Laitteiston käyttöliittymä: USB 2.0
- Äänen herkkyys: 94 dB
- Signaali-kohinasuhde: 46 dB
- Taajuusvaste: 20 Hz - 20 kHz
- Bittisyvyys/Sample Hinta: Jopa 24-bittinen/96 kHz
- Virtalähde: USB-väyläkäyttöinen
- Yhteensopivat laitteet: Smartphone, Tablet, macOS (OS X 10.9 or later), Windows (Windows 10)
- Tuotteen paino: 1 paunaa (noin 0.45 kg)
- Tuotteen mitat (P x L x K): 5.02 x 2.13 x 7.8 tuumaa (noin 12.75 x 5.41 x 19.81 cm)
- Valmistaja: Apogee Electronics Corp.
- UPC: 805676302034
Takuu ja tuki
Apogee products are known for their quality and reliability. For detailed warranty information and technical support, please refer to the official Apogee websivustolla tai tuotteen mukana toimitetussa dokumentaatiossa.
Löydät myös lisää resursseja ja usein kysyttyjä kysymyksiä osoitteesta Apogee Store on Amazon tai lataa Käyttöopas (PDF) kattavia tietoja varten.
For customer service inquiries related to your purchase, please contact the seller, Apogee Electronics Corp., directly through Amazon's platform.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.