Lepro Industrial LED Desk Lamp

Johdanto

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Tämä monipuolinen lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Lue tämä käyttöohje huolellisesti ennen asennusta ja käyttöä ja säilytä se myöhempää tarvetta varten.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Turvallisuusohjeet

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Käytä ainoastaan ​​E27-kantaisia ​​lamppuja, joiden enimmäisteho ontage 40W.
• Älä käytä lamp jos virtajohto tai pistoke on vaurioitunut.
• Tämä tuote on tarkoitettu vain sisäkäyttöön. Älä altista vettä tai korkeaa ilmankosteutta.
• Pidä lamp kaukana syttyvistä materiaaleista.
• Älä yritä purkaa tai korjata lamp itse. Ota yhteyttä pätevään huoltohenkilöstöön.

Pakkauksen sisältö

Tarkista pakkauksesta seuraavat tuotteet:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Käyttöopas

Note: The E27 bulb is not included and must be purchased separately.

Asennus ja asennus

Follow these steps to assemble and install your desk lamp:

1. Kiinnitä Clamp: Kiinnitä clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Kokoa Lamp Pää: Asenna lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Aseta varovasti lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Asenna lamppu: Varmista, että lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp Älä kiristä liikaa.
5. Liitä virtalähteeseen: Kytke lampvirtajohto sopivaan pistorasiaan.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Kuva: Lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Käyttöohjeet

Virta päälle/pois: Locate the rocker switch on the power cord. Press the switch to turn the lamp päälle tai pois päältä.

Valon kulman säätäminen: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Kuva: Lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Huolto

Puhdistus: Puhdistaaksesi lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Polttimon vaihto: Ennen lampun vaihtamista varmista, että lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp takaisin sisään.

Vianetsintä

• Lamp ei syty:
  • Tarkista, että virtajohto on kunnolla kiinni pistorasiassa.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Tarkista pistorasia kytkemällä siihen toinen laite.
• Valo välkkyy:
  • Varmista, että lamppu on ruuvattu tiukasti kiinni.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • Varmista, että clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Tarkista, että lamp arm is properly inserted into the clamp liitos.

Tekniset tiedot

Image: Product dimensions and key features like E27 bulb base and power cord length.

Takuu ja tuki

Takuu: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Asiakastuki: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.