1. Johdanto
This manual provides essential information for the safe and effective use of your SPS Brand 6V 14Ah T1T2 Replacement Battery. These sealed lead-acid (SLA) batteries are designed as replacements for the Emergi-Lite M3019 system. Please read this manual thoroughly before installation and operation.
Paketin sisältö:
- Eight (8) SPS Brand 6V 14Ah T1T2 Replacement Batteries
Note: Cables and connectors are not included and must be reused from your original setup.
2. Turvallisuustiedot
VAROITUS: Paristojen virheellinen käsittely voi johtaa vakaviin vammoihin tai vaurioihin. Noudata aina turvallisuusohjeita.
- Käytä aina asianmukaisia henkilönsuojaimia (PPE), mukaan lukien suojalaseja ja -käsineitä, käsitellessäsi akkuja.
- Do not short-circuit the battery terminals. This can cause sparks, heat, and potential fire or explosion.
- Do not expose batteries to open flames, excessive heat, or direct sunlight.
- Älä yritä avata, purkaa tai muokata akkua.
- Pidä paristot poissa lasten ulottuvilta.
- Dispose of spent batteries according to local regulations. Do not dispose of in household waste.
- Vältä kosketusta akkuhapon kanssa. Jos happoa joutuu kosketuksiin, huuhtele välittömästi vedellä ja hakeudu lääkärin hoitoon.
- Varmista riittävä ilmanvaihto akkuja ladattaessa.
Kalifornian ehdotus 65 Varoitus:
This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. These include Arsenic (as arsenic oxides), strong inorganic acid mists (including sulfuric acid), and Lead. For more information, refer to the product's Material Safety Data Sheet (MSDS/SDS).
3. Asennus ja asennus
Follow these steps to safely replace your existing batteries. Ensure the system is powered off before beginning installation.
- Virrankatkaisujärjestelmä: Disconnect all power sources from the Emergi-Lite M3019 system.
- Locate Batteries: Identify the location of the existing batteries within your Emergi-Lite M3019 unit.
- Disconnect Old Batteries: Carefully disconnect the cables and connectors from the old batteries. Note the polarity (positive and negative terminals) before disconnecting to ensure correct re-connection.
- Poista vanhat paristot: Remove the old batteries from the unit.
- Aseta uudet paristot: Place the new SPS Brand 6V 14Ah T1T2 replacement batteries into the designated compartments.
- Connect New Batteries: Reconnect the cables and connectors to the new batteries, ensuring correct polarity. The T1T2 terminals are designed for standard connections.
- Turvalliset akut: Ensure batteries are securely seated and connections are firm.
- Järjestelmän käynnistys: Reconnect power to the Emergi-Lite M3019 system and verify proper operation.

Figure 1: Eight SPS Brand 6V 14Ah T1T2 replacement batteries. Each battery features two terminals for connection.
4. Käyttöohjeet
These are rechargeable sealed lead-acid (SLA) batteries. Once installed, they function as the power source for your Emergi-Lite M3019 system. The system itself manages the charging and discharging cycles.
- Ensure the Emergi-Lite M3019 system is operating within its specified voltage and current limits to prevent damage to the batteries.
- Allow the system to fully charge the batteries after installation or after a prolonged power outage.
- Avoid deep discharges where possible, as this can reduce battery lifespan.
5. Huolto
Proper maintenance ensures optimal performance and extends the lifespan of your SPS Brand batteries.
- Säännöllinen tarkastus: Periodically inspect the batteries and terminals for any signs of corrosion, damage, or loose connections. Clean terminals if necessary using a wire brush and a baking soda solution (for corrosion).
- Lämpötila: Store and operate batteries within recommended temperature ranges (typically 20°C to 25°C or 68°F to 77°F) for optimal performance. Extreme temperatures can affect battery life.
- Lataus: Ensure the charging system of your Emergi-Lite M3019 is functioning correctly. Overcharging or undercharging can damage SLA batteries.
- Puhdistus: Keep the battery surfaces clean and dry. Use a damp liina pölyn tai lian pyyhkimiseen pois.
- Varastointi: If storing batteries for an extended period, ensure they are fully charged and recharge them every 3-6 months to prevent self-discharge and irreversible capacity loss. Store in a cool, dry place.
6. Vianmääritys
If you encounter issues with your battery system, consider the following common troubleshooting steps:
- Järjestelmä ei käynnisty:
- Tarkista kaikki kaapeliliitännät varmistaaksesi, että ne ovat tukevasti kiinni ja että ne on polarisoitu oikein.
- Verify that the Emergi-Lite M3019 system is receiving external power (if applicable).
- Testaa voltage of individual batteries with a multimeter. A significantly low voltage may indicate a faulty battery.
- Lyhennetty ajoaika:
- Varmista, että akut on ladattu täyteen.
- Check for any excessive load on the system.
- Batteries may be reaching the end of their service life and require replacement.
- Korroosio liittimissä:
- Disconnect power and carefully clean terminals with a wire brush and a mixture of baking soda and water. Rinse and dry thoroughly before reconnecting.
If problems persist, consult the Emergi-Lite M3019 system's manual or contact a qualified technician.
7. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Merkki | SPS |
| Mallinumero | SG06140T1T2 |
| Voitage | 6 volttia |
| Akun kapasiteetti | 14 Amp Tuntia (Ah) |
| Ampkorotus | 14 Amps |
| Akkukennon koostumus | Lyijyhappo |
| Akun kennotyyppi | Lyijyhappo |
| Terminaalin tyyppi | T1T2 |
| Mitat (PxLxK) | 4.25 x 2.8 x 5.5 tuumaa |
| Paino yksikköä kohti | 4.8 paunaa (noin 2.18 kg) |
| Uudelleenkäytettävyys | Yes (Rechargeable) |
| Suositeltu käyttöympäristö | Sisä/ulko |
| Valmistaja | Sigma Power Systems |
8. Takuu ja tuki
For warranty information and technical support regarding your SPS Brand 6V 14Ah T1T2 Replacement Batteries, please refer to the documentation provided with your purchase or contact the seller directly.
Myyjä: Rightprice Batteries
For specific inquiries related to the Emergi-Lite M3019 system, please consult the original manufacturer's documentation.