Penn-Plax BT1

PENN-PLAX NuWave Betta Fish Tank Kit Instruction Manual

Malli: BT1

Johdanto

This manual provides instructions for the setup, operation, and maintenance of your PENN-PLAX NuWave 1.5 Gallon Betta Fish Tank Kit. This kit is designed for small aquatic environments, featuring an integrated internal filter and an LED light for optimal viewing.

Image: The assembled PENN-PLAX NuWave 1.5 Gallon Betta Fish Tank Kit, featuring a clear plastic tank, black base, and integrated lid with LED light and internal filter.

Turvallisuustiedot

Lue kaikki ohjeet ennen käyttöä.
Ensure the tank is placed on a stable, level surface away from direct sunlight or heat sources.
Do not immerse the LED light or power adapter in water.
Always unplug the power adapter before performing any maintenance or cleaning.
Keep electrical cords away from water.
Tämä tuote on tarkoitettu vain sisäkäyttöön.

Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ja ehjät ennen asennuksen jatkamista.

1.5 Gallon Plastic Aquarium Tank
Integrated Internal Filter
Coarse Sponge (for filter)
Carbon Media Cartridge (for filter)
LED Light (integrated into lid)
Removable Plastic Lid
Power Adapter (for LED light and filter)

PENN-PLAX NuWave Betta Tank Kit components laid out

Image: All components of the PENN-PLAX NuWave Betta Tank Kit, including the tank, internal filter, LED light, and power adapter, laid out on a white surface.

Asennusohjeet

Pura komponentit: Poista kaikki tuotteet varovasti pakkauksesta. Tarkista mahdollisten vaurioiden varalta.
Huuhtelusäiliö ja koristeet: Rinse the plastic tank, lid, and any gravel or decorations (not included) thoroughly with clean water. Do not use soap or detergents.
Asenna suodatinmateriaali: Open the internal filter housing. Insert the coarse sponge and carbon media cartridge into their designated slots within the filter. Ensure they are seated correctly.
Sijaintisuodatin: Place the internal filter inside the tank, typically in a corner or along a side, ensuring it is securely attached or positioned.
Lisää alusta ja koristeet: Add your chosen substrate (e.g., gravel) and any decorations to the tank.
Täytä vedellä: Slowly fill the tank with dechlorinated water to the recommended level, typically just below the rim. Ensure the internal filter is submerged.
Attach Lid and LED Light: Place the removable plastic lid onto the tank. The LED light is integrated into the lid.
Liitä virta: Plug the power cord from the LED light into a suitable electrical outlet. The internal filter is powered through this connection.

PENN-PLAX NuWave Betta Tank with internal filter

Image: A clear plastic aquarium tank with the black internal filter unit installed on the right side, ready for water and decorations.

Käyttöohjeet

Internal Filter Operation

The integrated internal filter provides biological, mechanical, and chemical filtration to maintain water clarity and quality. It operates continuously when the LED light is plugged in, as it shares the same power source.

Ensure the filter is fully submerged before plugging in the power adapter.
The filter will begin operating automatically once power is supplied.

LED-valojen käyttö

The ultra-bright white LED light is embedded in the lid for maximum viewing. It features a separate on/off switch.

Locate the on/off switch on the LED light fixture.
Paina kytkintä kytkeäksesi valon päälle tai pois.
The filter will continue to run regardless of the LED light's on/off status, as long as the unit is plugged into a power source.

Huolto

Säännöllinen puhdistus

Perform weekly partial water changes (25-50%) to maintain water quality.
Use an aquarium siphon to remove debris from the substrate during water changes.
Wipe down the inside and outside of the tank with an aquarium-safe cleaning pad or soft cloth. Do not use household cleaners.

Suodatinpatruunan vaihto

The carbon media cartridge should be replaced regularly to ensure effective chemical filtration. The coarse sponge can be rinsed and reused.

Unplug the power adapter before accessing the filter.
Carefully remove the internal filter from the tank.
Open the filter housing and remove the old carbon media cartridge.
Rinse the coarse sponge in old aquarium water (not tap water) to preserve beneficial bacteria.
Insert a new carbon media cartridge (PENN-PLAX BT1A, BT1A3, or BT1A6 replacements are compatible).
Reassemble the filter, place it back in the tank, and plug in the power adapter.

Vianetsintä

Ongelma	Mahdollinen syy	Ratkaisu
Suodatin ei toimi	Ei kytketty pistorasiaan; virta pois päältätage; impeller jammed.	Check power connection. Ensure filter is fully submerged. Unplug, remove filter, check impeller for obstructions, clean if necessary, then reassemble and plug in.
LED valo ei toimi	Not plugged in; switch off; faulty LED.	Check power connection. Ensure LED switch is in the 'on' position. If still not working, contact customer support.
Pilvistä vettä	New tank syndrome; overfeeding; insufficient filtration; dirty filter media.	Perform a partial water change. Reduce feeding. Replace carbon media cartridge. Ensure filter is running correctly. Allow time for beneficial bacteria to establish.
Weak filter flow	Clogged filter media; dirty impeller.	Clean or replace filter media (sponge and carbon cartridge). Clean the impeller and its housing.

Tekniset tiedot

Mallinumero	BT1
Tankin tilavuus	1.5 gallonaa
Kokonaismitat (L x S x K)	8.5 cm x 6 cm x 9.5 cm
Tank Interior Dimensions (W x D x H)	8.5 cm x 6 cm x 7.5 cm
Base Dimensions (W x D x H)	8.5 cm x 6 cm x 1.5 cm
Materiaali	Muovi
Erikoisominaisuudet	Integrated Internal Filter, LED Light

Takuu

This product is covered by the standard Amazon Policy. For specific details regarding returns, replacements, or warranty claims, please refer to your Amazon purchase history or contact Amazon customer service directly.

Tukea

For further assistance or inquiries regarding your PENN-PLAX NuWave Betta Fish Tank Kit, please visit the official Penn-Plax website or contact their customer support department. Keep your purchase receipt and model number (BT1) available for reference.

Lisätietoja löydät osoitteesta Penn-Plax Store on Amazon.

Aiheeseen liittyvät asiakirjat - BT1

	Penn-Plax Aquasphere 360 -akvaarion asennus- ja hoito-opas Kattava opas Penn-Plax Aquasphere 360 -akvaarion asentamiseen ja huoltoon, mukaan lukien kokoamisohjeet, huoltovinkit ja takuutiedot.
	Penn-Plax Cascade CCF2 & CCF3 Canister Filter 700/1000 User Manual and Parts List Comprehensive user manual and parts list for Penn-Plax Cascade CCF2 and CCF3 canister filters, models 700 and 1000. Includes assembly, maintenance, troubleshooting, and warranty information.
	Penn-Plax Cascade CCF4UL & CCF5UL Canister Filter 1200 & 1500: Parts and Instructions Comprehensive guide detailing parts and assembly instructions for Penn-Plax Cascade CCF4UL and CCF5UL aquarium canister filters, models 1200 and 1500. Includes a parts list, step-by-step setup, media installation, and hose attachment guidance.
	Penn-Plax Cascade CCF1 Models Canister Filter 500 User Manual Comprehensive guide for setting up, operating, and maintaining the Penn-Plax Cascade CCF1 Models Canister Filter 500. Includes parts list, assembly instructions, maintenance tips, and warranty information.
	Penn-Plax 2023 -akvaarioluettelo: Laitteet, kasvit ja koristeet Tutustu kattavaan Penn-Plax-luetteloon vuodelta 2023, joka sisältää laajan valikoiman akvaariotarvikkeita, hoitotarvikkeita, eläviä kasveja ja koriste-esineitä minkä tahansa vesiympäristön parantamiseksi.
	Penn-Plax 2025 Catalog: Aquarium, Reptile, and Pet Supplies Explore the comprehensive Penn-Plax 2025 Catalog, featuring a wide range of aquarium products from Cascade and Shorefins, Tide & Treasure decor, licensed character items, and Reptology reptile care solutions. Find everything for your aquatic and terrarium needs.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.