FISCHER Bicycle Pedals Instruction Manual

1. Tuote ohiview

The FISCHER Pedale MTB Kunststoff are durable plastic pedals designed for various bicycle types, particularly mountain bikes. They feature a non-slip design for enhanced grip and integrated reflectors for improved visibility and safety, complying with German Road Traffic Licensing Regulations.

Tärkeimmät ominaisuudet:

• Suitable for all bicycle types.
• Non-slip and non-slip special design for secure foot placement.
• Equipped with reflectors for increased visibility.
• Approved by German Road Traffic Licensing Regulations (StVZO).
• Lightweight plastic construction.

2. Asennus ja asennus

Proper installation of your new pedals is crucial for safety and performance. Please follow these steps carefully.

Tarvittava työkalu:

• Pedal wrench (recommended item 85526) or a 15mm open-end wrench.

Asennusvaiheet:

1. Identify Left and Right Pedals: Pedals are typically marked with 'L' for left and 'R' for right. The right pedal (drive side) has a standard thread, while the left pedal has a reverse thread. This means the left pedal tightens counter-clockwise and loosens clockwise.
2. Prepare Crank Arms: Ensure the threads on your bicycle's crank arms are clean and free of debris. Applying a small amount of bicycle grease to the pedal threads can prevent seizing and make future removal easier.
3. Install Right Pedal: Insert the 'R' pedal into the right crank arm. Turn clockwise by hand to start threading. Once finger-tight, use your pedal wrench to firmly tighten the pedal. Do not overtighten, but ensure it is secure to prevent loosening during use.
4. Install Left Pedal: Insert the 'L' pedal into the left crank arm. Turn counter-clockwise by hand to start threading (reverse thread). Once finger-tight, use your pedal wrench to firmly tighten the pedal.
5. Lopputarkastus: After installation, ensure both pedals spin freely and are securely attached to the crank arms.

Figure 2.1: FISCHER Pedale MTB Kunststoff, showing the non-slip surface and integrated reflectors.

3. Käyttöohjeet

These pedals are designed for general cycling use, offering a stable and secure platform for your feet.

• Jalkojen sijoitus: Position your foot so the ball of your foot is over the pedal spindle for optimal power transfer and comfort.
• Liukumaton muotoilu: The textured surface and molded pins provide excellent grip, even in wet conditions.
• Heijastimet: The integrated reflectors enhance your visibility to others, especially in low-light conditions. Ensure they are clean and unobstructed.
• Säännölliset tarkastukset: Periodically check that the pedals are still securely tightened to the crank arms before each ride.

4. Huolto

Säännöllinen huolto pidentää polkimiesi käyttöikää ja suorituskykyä.

• Puhdistus: Clean the pedals with a damp cloth and mild soap. Avoid harsh chemicals that could damage the plastic.
• Tarkastus: Regularly inspect the pedal body for cracks or damage. Check the reflectors for cleanliness and ensure they are not broken.
• Spindle Check: Listen for any unusual noises (e.g., squeaking, grinding) from the pedal spindle, which might indicate worn bearings. While these pedals are not designed for user-serviceable bearings, excessive play or noise may indicate a need for replacement.
• Tiiviys: Re-check the tightness of the pedals on the crank arms periodically, especially after the first few rides.

5. Vianmääritys

Tässä on joitakin yleisiä ongelmia ja niiden mahdollisia ratkaisuja:

6. Tekniset tiedot

7. Takuu ja tuki

Jos tarvitset takuutietoja tai teknistä tukea, ota yhteyttä jälleenmyyjään tai valmistajan viralliseen edustajaan. websivusto. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.

Manufacturer: FISCHER