Hella 011988011

Hella 011988011 HLMP 90MM LED Fog/DRL/Position Lamp

Käyttöohje

1. Tuote ohiview

The Hella 011988011 HLMP 90MM LED module is designed to function as a Fog Lamp, Daytime Running Light (DRL), and Position Lamp. This unit is suitable for upgrading existing vehicle lighting or as an accessory item. It features a compact design and utilizes LED technology for clear and efficient illumination.

Hella 011988011 90MM LED Fog/DRL/Position Lamp edessä view

Kuva 1: Etuosa view of the Hella 011988011 90MM LED Fog/DRL/Position Lamp.

2. Turvallisuustiedot

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, vehicle, or personal injury.

  • Irrota aina ajoneuvon akku ennen sähkötöiden tekemistä.
  • Ensure proper wiring and connections to prevent short circuits or electrical fires.
  • Käytä asennuksen aikana asianmukaisia ​​henkilönsuojaimia, kuten suojalaseja ja -käsineitä.
  • Älä muuta lamp or its components. Unauthorized modifications may void the warranty and compromise safety.
  • Varmista, että lamp is securely mounted to prevent detachment during vehicle operation.
  • Jos olet epävarma asennusvaiheista, ota yhteyttä pätevään autoasentajaan.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

  • Hella 011988011 90MM LED Lamp
  • Asennusohjeet

4. Asennus ja asennus

This section provides general guidelines for installing the Hella 011988011 LED lamp. Refer to the included mounting instructions for detailed, product-specific installation steps and wiring diagrams. Professional installation is recommended.

4.1 Asennusta edeltävät tarkastukset

  1. Ensure the vehicle's electrical system is compatible with the LED lamp's voltage vaatimukset.
  2. Identify a suitable mounting location on the vehicle, considering the lamp's dimensions and beam pattern.
  3. Gather necessary tools, which may include wrenches, screwdrivers, wire strippers, crimpers, and electrical tape.

4.2 L:n asentaminenamp

Lamp features a universal fit design. Use the provided mounting instructions and hardware to secure the lamp to the vehicle. Ensure the mounting surface is stable and can support the lamppaino.

Hella 011988011 90MM LED Lamp alkuun view mitoilla

Kuva 2: Yläosa view lamp showing a width of approximately 73.5mm (2.89 inches).

Hella 011988011 90MM LED Lamp puolella view mitoilla

Kuva 3: Sivu view lamp showing a total depth of approximately 90mm (3.5 inches) and a mounting depth of 54mm (2.1 inches).

Hella 011988011 90MM LED Lamp takana view mitoilla

Kuva 4: Takaosa view lamp showing a width of approximately 96mm (3.7 inches) and a height of 117mm (4.6 inches).

4.3 Sähköliitäntä

Yhdistä lamp to the vehicle's electrical system according to the wiring diagram provided in the separate mounting instructions. Ensure all connections are secure and properly insulated. The lamp is designed for use as a fog lamp, daytime running light, and position lamp, requiring appropriate connections to the vehicle's respective circuits.

Hella 011988011 90MM LED Lamp takana view yhteyksien näyttäminen

Kuva 5: Takaosa view lamp, illustrating the connection points for electrical wiring.

5. Käyttöohjeet

Once properly installed and wired, the Hella 011988011 LED lamp will operate in conjunction with your vehicle's lighting system. The specific activation of the fog, DRL, and position lamp functions will depend on how they are integrated into your vehicle's electrical system and controlled by the vehicle's switches.

  • Sumu Lamp Tehtävä: Typically activated via the vehicle's fog light switch. Designed to provide improved visibility in conditions of fog, heavy rain, or snow.
  • Daytime Running Light (DRL) Function: Often activates automatically when the vehicle is running, providing increased visibility to other road users during daylight hours.
  • Asento Lamp Tehtävä: Provides a low-intensity light to indicate the vehicle's presence and width, usually active with the vehicle's parking lights or headlights.

Refer to your vehicle's owner's manual for specific instructions on operating auxiliary lighting.

6. Huolto

The Hella 011988011 LED lamp is designed for durability and minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Puhdistus: Periodically clean the lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens.
  • Tarkastus: Tarkista säännöllisesti lamp for any signs of damage, loose connections, or corrosion. Ensure the mounting hardware remains secure.
  • Vedenpitävä ominaisuus: Lamp is designed to be waterproof. However, avoid directing high-pressure water jets directly at the lamp's seals during vehicle washing.
  • LED-elinikä: LED lights have a long operational lifespan and typically do not require bulb replacement. If the lamp ceases to function, refer to the troubleshooting section.

7. Vianmääritys

If the Hella 011988011 LED lamp is not functioning as expected, perform the following checks:

  • Lamp Ei syty:
    • Check all electrical connections for tightness and proper insulation.
    • Verify that the vehicle's fuse for the lighting circuit is intact and not blown.
    • Ensure the vehicle's battery has sufficient charge and the electrical system is supplying power to the lamp.
    • Confirm that the vehicle's light switch (fog, DRL, or position) is in the correct position.
  • Dim or Intermittent Light:
    • Inspect wiring for corrosion or damage that could impede current flow.
    • Check for loose ground connections.
    • Ensure the vehicle's voltage is stable and within the lampn toiminta-alue.
  • Kosteus linssin sisällä:
    • Kun lamp is waterproof, extreme temperature changes can sometimes cause condensation. This usually dissipates on its own.
    • If significant water ingress is observed, check for damage to the housing or seals.

If issues persist after performing these checks, contact Hella customer support or a qualified technician.

8. Tuotteen tekniset tiedot

OminaisuusErittely
MerkkiHella
Mallinumero011988011
Valonlähteen tyyppiLED
Ajoneuvopalvelun tyyppiKuorma-auto
ErikoisominaisuusVedenpitävä
Auton osan sijaintiTakaosa
Linssin väriSelkeä
Linssin materiaaliPolykarbonaatti
Tuotteen mitat (P x L x K)1 x 1 x 1 tuumaa (Note: Physical dimensions from diagrams are approximately 90mm depth, 73.5mm width, 117mm height)
Valmistajan osanumero011988011
UPC760687154648
Automotive Fit TypeUniversal Fit
Mukana olevat komponentitLamp, Mounting Instructions

9. Takuutiedot

This Hella product is covered by a 1 vuoden valmistajan takuu from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, abuse, modification, or normal wear and tear.

For warranty claims, please retain your proof of purchase and contact Hella customer support or the authorized dealer from whom the product was purchased.

10. Asiakastuki

If you have any questions regarding the installation, operation, or maintenance of your Hella 011988011 HLMP 90MM LED Fog/DRL/Position Lamp, katso seuraavat resurssit:

  • Hella Official Websivusto: Visit the official Hella websivustolta tuotetietoja, usein kysyttyjä kysymyksiä ja yhteystietoja.
  • Valtuutettu jälleenmyyjä: Contact the retailer or distributor from whom you purchased the product.
  • Ammattimainen autoteknikko: For complex installation or electrical issues, consult a certified automotive professional.

© 2023 Hella. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.