1. Tuote ohiview
The Wilo Sub TWI5-307 EM FS is a 5-inch multi-stage submersible motor pump constructed from stainless steel. This pump is designed for various water management applications, including water supply and pressurization, pumping from wells, cisterns, and tanks, as well as channeled irrigation, rain irrigation, and general water usage.
Key features include a float switch version for automated operation, an optimized hydraulic system for high efficiency, TÜV certification in accordance with the KTW directive, and a self-cooling motor that allows for dry installation outside of water. The single-phase AC version comes pre-assembled with an electrical panel and motor protection for straightforward installation.
Figure 1: Wilo Sub TWI5-307 EM FS Submersible Motor Pump. This image shows the compact design of the stainless steel pump, suitable for various water applications.
2. Asennus ja asennus
Proper installation is crucial for the safe and efficient operation of your Wilo Sub TWI5-307 EM FS pump. It is highly recommended that installation and electrical connections be performed by a qualified professional.
2.1. sijoitus
- The pump is designed for submersible use in wells, cisterns, and tanks. Ensure the pump is placed in a stable position, free from obstructions.
- Thanks to its self-cooling motor, the pump can also be installed in a dry environment outside of water, provided adequate ventilation is maintained.
2.2. Sähköliitäntä
- The pump is a single-phase AC version and comes pre-assembled with an electrical panel and motor protection.
- Connect the pump to a suitable power supply according to local electrical codes and regulations. Ensure the voltage and frequency match the pump's requirements.
- The motor protection system safeguards the pump against overload and short circuits. Do not bypass or modify this system.
2.3. Putken liitäntä
- Connect the discharge pipe to the pump outlet. Ensure all connections are watertight to prevent leaks.
- For submersible installations, use a strong rope or cable to lower the pump into the water, ensuring it is suspended securely and not resting on the bottom sediment.
3. Käyttöohjeet
The Wilo Sub TWI5-307 EM FS pump is designed for easy operation once correctly installed.
3.1. Ensimmäinen käynnistys
- Before starting, ensure the pump is fully submerged (if applicable) and all connections are secure.
- Switch on the power supply to the pump. The motor protection unit will engage.
- Observe the pump for any unusual noises or vibrations during the first few minutes of operation.
3.2. Automatic Operation (Float Switch Version)
- For models equipped with a float switch, the pump will automatically start and stop based on the water level.
- Adjust the float switch cable length to set the desired ON/OFF levels. Ensure the float switch can move freely.
3.3. Sovellukset
This pump is suitable for:
- Water supply and pressurization in domestic or commercial settings.
- Pumping water from deep wells, cisterns, and storage tanks.
- Irrigation systems, including channeled and rain irrigation.
- General water transfer and usage.
4. Huolto
The Wilo Sub TWI5-307 EM FS pump is designed for easy maintenance and is resistant to corrosion and wear, ensuring a long service life. Regular checks can help maintain optimal performance.
4.1. Rutiinitarkastukset
- Periodically inspect the pump and its connections for any signs of damage, leaks, or corrosion.
- Ensure the intake screen is clear of debris to prevent clogging and maintain efficient water flow.
- For float switch models, verify that the float switch moves freely and is not obstructed.
4.2. Puhdistus
- If the pump is operating in water with high sediment content, it may require occasional cleaning of the impeller and housing.
- Irrota aina virtajohto pistorasiasta ennen minkään puhdistuksen tai huollon suorittamista.
4.3. Talvivalmistelu (jos sovellettavissa)
- In regions prone to freezing temperatures, remove the pump from service and drain all water to prevent damage from ice expansion. Store in a dry, frost-free location.
5. Vianmääritys
This section provides solutions to common issues you might encounter with your Wilo Sub TWI5-307 EM FS pump. For problems not listed here or if solutions do not resolve the issue, contact a qualified service technician.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Pumppu ei käynnisty. | No power supply; Motor protection tripped; Float switch not activated (if applicable); Electrical fault. | Check power connection and circuit breaker; Reset motor protection; Verify float switch position; Consult an electrician. |
| Vähäinen tai ei ollenkaan vesivirtausta. | Clogged intake screen; Air in the system; Impeller obstruction; Low water level. | Clean intake screen; Bleed air from the system; Inspect impeller for debris (disconnect power first); Ensure adequate water level. |
| Pumppu käy jatkuvasti. | Float switch stuck in ON position; Leak in the system; Check valve malfunction. | Check float switch for free movement; Inspect piping for leaks; Check or replace check valve. |
| Liiallinen melu tai tärinä. | Foreign object in pump; Worn bearings; Improper installation. | Disconnect power and inspect pump for foreign objects; Contact service technician for bearing replacement; Re-check installation stability. |
6. Tekniset tiedot
The following are the technical specifications for the Wilo Sub TWI5-307 EM FS submersible motor pump:
- Merkki: Wilo
- Malli: Sub TWI5-307 EM FS
- Valmistajan osanumero: 4144938
- Materiaali: Ruostumaton teräs
- Tyyli: Upotettava
- Virtalähde: Electric Cable (Single-phase AC)
- ASIN: B072F25FD8
- Ominaisuudet: Multi-stage design, Optimized hydraulic system, TÜV KTW certified, Self-cooling motor, Pre-assembled electrical panel with motor protection, Float switch version available.
7. Takuu ja tuki
For information regarding the warranty period and terms for your Wilo Sub TWI5-307 EM FS pump, please refer to the documentation provided at the time of purchase or contact your authorized Wilo dealer or customer support directly.
If you require technical assistance, spare parts, or professional servicing, please contact Wilo customer service or an authorized service partner. Ensure you have your product model and serial number available when contacting support.
Wilo Official Websivusto: www.wilo.com
