1. Tuote ohiview
The DB Electrical Starter Motor 410-12070 is a new aftermarket unit designed to meet or exceed OEM specifications for various applications. This 12-volt starter features a 9-tooth pinion, clockwise rotation, and a direct drive (DD) type. It is engineered for reliable engine starting performance.
This image displays the DB Electrical Starter Motor model 410-12070, a new aftermarket unit designed for various vehicle applications. The starter features a robust housing, solenoid, and gear assembly, ready for installation.
Tärkeimmät ominaisuudet:
- Voitage: 12V
- Kierto: Myötäpäivään (CW)
- Hampaat: 9-tooth pinion
- Tyyppi: Direct Drive (DD)
- 100% new aftermarket starter, built to OEM specifications.
- Mukana 1 vuoden takuu.
2. Yhteensopivuus
This starter motor is compatible with a wide range of vehicles and equipment. Please verify your specific model and OEM part number for accurate fitment.
Yhteensopivat ajoneuvomallit:
- Baker: FGD-30 (1965), FGD-55 (1965), FGF-30 (1967), FGF-50 (1967), FGF-60 (1965), FGF-80 (1965), FIA-20 (1967), FIA-30 (1967), FID-30 (1965), FID-55 (1965), FID-60 (1965), FID-80 (1965), FIF-30 (1967), FIF-50 (1967), FIF-60 (1965), FIF-80 (1965), FJA-20 (1967), FJA-30 (1967), FJD-20 (1967), FJD-30 (1965), FJD-55 (1965), FJD-60 (1965), FJD-80 (1965), FJF-20 (1965), FJF-30 (1965), FJF-50 (1965), FJF-60 (1965), FJF-80 (1965), FMD-20 (1967), FMD-30 (1965), FMD-55 (1965), FMD-60 (1965), FMD-80 (1965), FMF-20 (1967), FMF-30 (1967), FMF-50 (1967), FMF-60 (1965), FMF-80 (1965)
- Clark: C20 Series (1963-1964 Y-112), C25 Series (1963-1964 Y-112), C30 Series (1963-1964 F-162), C40 Series (1963-1964 F-162), CFY60 Series (1963-1965 F-244), CY20 Series (1963-1964 F-162), CY40 Series (1963-1964 F-162), CY60 Series (1963-1964 F-244)
Compatible OEM Numbers:
- AC DELCO: 323-639
- ANDRE NIERMANN: 017885
- CLARK: 884105
- DELCO: 1107215, 1107885, 1108290, 1109438, 12301295
- DIXIE: TS-1153
- HYSTER: 3002941
- LESTER: 4342
- NAPA: 44-4120
- YALE: 2200521-04
3. Tekniset tiedot
| Erittely | Arvo |
|---|---|
| Tuotteen mallinumero | 410-12070 |
| Merkki | DB sähkö |
| Voitage | 12V |
| Kierto | Myötäpäivään (CW) |
| Hampaat | 9 |
| Tyyppi | Direct Drive (DD) |
| Ampkorotus | 12 Amps |
| Wattage | 1.2 kW |
| Tuotteen mitat (P x L x K) | 2.54 x 2.54 x 2.54 cm (1 x 1 x 1 tuumaa) |
| Tuotteen paino | 453.59 g (1 pauna) |
| UPC | 711811739194 |
4. Asennus ja asennus
Proper installation is crucial for the safe and effective operation of your new starter motor. If you are not experienced with automotive electrical systems, it is recommended to seek professional assistance.
Yleiset asennusvaiheet:
- Turvallisuus ennen kaikkea: Disconnect the vehicle's negative battery terminal to prevent electrical shorts and accidental starting. Ensure the vehicle is on a level surface and properly supported with jack stands if working underneath.
- Etsi vanha käynnistin: Tunnista olemassa oleva käynnistysmoottori, joka on tyypillisesti asennettu moottorilohkoon vaihteiston kellokotelon lähelle.
- Irrota johdot: Carefully disconnect all electrical connections from the old starter. This usually includes a large battery cable and one or more smaller solenoid wires. Note their positions for reinstallation.
- Irrota kiinnityspultit: Irrota pultit, jotka kiinnittävät vanhan käynnistysmoottorin moottoriin tai vaihteistoon. Tue käynnistintä irrottaessasi viimeisen pultin, jotta se ei putoa.
- Asenna uusi käynnistin: Position the new DB Electrical starter motor in place and secure it with the mounting bolts. Ensure it is seated correctly and tightened to the manufacturer's torque specifications (refer to your vehicle's service manual).
- Kytke johdotus uudelleen: Reattach all electrical connections to the new starter, ensuring they are clean, tight, and in their correct positions. Double-check all connections.
- Liitä akku uudelleen: Kytke akun negatiivinen napa takaisin.
- Testitoiminta: Attempt to start the vehicle. Listen for proper starter engagement and engine cranking. If issues arise, refer to the troubleshooting section.
Tärkeää: Always consult your vehicle's specific service manual for detailed installation procedures and safety precautions.
5. Käyttöohjeet
The starter motor is an integral part of your vehicle's starting system. Its operation is automatic when you turn the ignition key or press the start button.
Normaali toiminta:
- When the ignition key is turned to the 'START' position (or start button is pressed), electrical current flows to the starter solenoid.
- The solenoid engages the starter pinion gear with the engine's flywheel.
- Simultaneously, the solenoid completes the circuit to the starter motor, causing it to spin.
- The spinning starter motor cranks the engine, initiating the combustion process.
- Once the engine starts, the ignition system disengages the starter, and the pinion gear retracts from the flywheel.
Vältä pitkää käynnistystä (yli 10–15 sekuntia) käynnistysmoottorin ylikuumenemisen estämiseksi. Anna moottorin jäähtyä lyhyesti käynnistysyritysten välillä.
6. Huolto
While starter motors are generally robust, periodic inspection can help ensure longevity and prevent unexpected failures.
Suositeltu huolto:
- Akun kunto: Varmista, että ajoneuvosi akku on hyvässä kunnossa ja täyteen ladattu. Heikko akku voi rasittaa käynnistysmoottoria liikaa.
- Kaapeliliitännät: Periodically inspect the battery cables and starter motor connections for corrosion, looseness, or damage. Clean any corrosion and ensure all connections are tight.
- Silmämääräinen tarkastus: Check the starter motor for any signs of physical damage, excessive dirt, or oil contamination. Keep the area around the starter clean.
- Vältä ylikiertämistä: As mentioned in the operating section, avoid excessively long cranking times to prevent overheating.
7. Vianmääritys
If you experience issues with your vehicle's starting system, consult the following common troubleshooting steps:
| Oire | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Engine does not crank or cranks very slowly | Weak or dead battery, loose/corroded battery terminals, faulty starter solenoid, faulty starter motor. | Check battery charge and terminals. Test battery. Inspect starter wiring. If battery and connections are good, starter motor or solenoid may need replacement. |
| Clicking sound but no crank | Alhainen akun tilavuustage, faulty starter solenoid, poor electrical connection to starter. | Charge or replace battery. Check battery and starter connections for tightness and corrosion. Solenoid may be failing to engage the motor. |
| Hiontaääntä käynnistyksen aikana | Damaged starter pinion gear, damaged flywheel teeth, improper starter engagement. | Inspect starter pinion and flywheel for damage. Ensure starter is properly mounted and aligned. This often indicates a need for starter replacement or flywheel repair. |
| Käynnistin pyörii, mutta moottori ei käynnisty | Faulty starter drive (bendix) mechanism, damaged flywheel. | The starter's internal clutch or gear mechanism may not be engaging the flywheel. Starter replacement is typically required. |
Jos nämä toimenpiteet eivät ratkaise ongelmaa, on suositeltavaa kääntyä pätevän autoasentajan puoleen.
8. Takuu ja tuki
The DB Electrical Starter Motor 410-12070 comes with a 1 vuoden takuu ostopäivästä lukien. Tämä takuu kattaa valmistusvirheet ja takaa mielenrauhasi.
For warranty claims, technical assistance, or any product-related inquiries, please contact DB Electrical customer support through their official website or the retailer where the product was purchased. Please have your purchase receipt and product model number (410-12070) available when contacting support.
Lisätietoja on osoitteessa DB Electrical official websivusto.