PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Johdanto

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Turvallisuusohjeet

Lue ja ymmärrä kaikki turvallisuusohjeet ennen laitteen käyttöä. Näiden ohjeiden noudattamatta jättäminen voi johtaa lasersäteilyaltistukseen, sähköiskuun, tulipaloon tai vakavaan vammaan.

• Laserturvallisuus: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Akun turvallisuus: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Toimintaympäristö: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Huolto: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• PeakTech P 2800A Laser Distance Meter
• Vyölaukku
• 2 x 1.5 V AAA-alkaliparistoa
• User Manual (German and English)
• Kalibroinnin vahvistus

4. Laite loppuview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Kuva 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Kuva 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Kuva 3: Lähikuva view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Kuva 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• YKSIKKÖ: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Viitepiste-painike: Changes the measurement reference point (front, rear, flip-out stop).
• Muistipainike: Accesses stored measurements.
• Taustavalopainike: Toggles display backlight.
• LCD-näyttö: Multi-line display showing current measurements, previous results, and function icons.

5. Asennus

5.1 Akun asennus

1. Paikanna laitteen takaosassa oleva paristolokeron kansi.
2. Avaa lokero liu'uttamalla tai irrottamalla kantta.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. Sulje paristolokeron kansi kunnolla.

The device will automatically power on or can be powered on by pressing the MEAS -painiketta.

6. Käyttöohjeet

6.1 Virta päälle/pois

• Virta päälle: Paina MEAS -painiketta.
• Virta pois: Paina ja pidä painettuna OFF/CLEAR button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Mittayksiköiden muuttaminen

Paina UNIT button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Viitepisteen asettaminen

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Viitekohta button to switch between these options. The current reference point is indicated on the display.

6.4 Yksittäinen etäisyysmittaus

1. Suuntaa laser kohteeseen.
2. Paina MEAS -painiketta kerran laserin aktivoimiseksi.
3. Paina MEAS -painiketta uudelleen mittauksen suorittamiseksi. Tulos tulee näkyviin.

6.5 Jatkuva mittaus (min/maks)

1. Paina ja pidä painettuna MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Paina MEAS uudelleen lopettaaksesi jatkuvan mittauksen.

6.6 Pinta-alan mittaus

1. Paina Ala / tilavuus button once to enter area measurement mode. An icon for area will appear on the display.
2. Mittaa ensimmäinen sivu (esim. pituus) painamalla MEAS.
3. Mittaa toinen sivu (esim. leveys) painamalla MEAS.
4. Laskettu pinta-ala tulee näkyviin.

6.7 Tilavuuden mittaus

1. Paina Ala / tilavuus button twice to enter volume measurement mode. An icon for volume will appear.
2. Mittaa pituus painamalla MEAS.
3. Mittaa leveys painamalla MEAS.
4. Mittaa korkeus painamalla MEAS.
5. Laskettu tilavuus tulee näyttöön.

6.8 Pythagoraan mittaus (epäsuora mittaus)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Paina Pythagoraan button to select the desired indirect measurement mode.
2. Noudata näytön ohjeita tehdäksesi tarvittavat mittaukset (esim. hypotenuusa, pohja).
3. The device will calculate and display the unknown height or distance.

6.9 Yhteen- ja vähennyslasku

After taking a measurement, you can add or subtract subsequent measurements:

1. Ota mitta.
2. Paina + lisäys- tai - vähennyslaskua varten.
3. Ota seuraava mittaus. Tulos lisätään edelliseen arvoon tai vähennetään siitä.
4. Toista tarpeen mukaan.

6.10 Muistitoiminto

The device can store up to 99 measurement values.

• Kauppa: Measurements are automatically stored.
• Muista: Paina Muisti -painiketta view stored values. Use the + ja - buttons to scroll through the memory.
• Tyhjennä muisti: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Huolto

• Puhdistus: Käytä pehmeää, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Varastointi: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Akun vaihto: Vaihda paristot, kun näytössä näkyy heikon pariston ilmaisin.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech websivustolla tai ota yhteyttä asiakaspalveluun.